Environmental chemistry in the twenty-first century

Human society actually faces many environmental challenges such as environmental pollution, climate changes and loss of biodiversity. These issues induce major risks for ecosystems and are a serious threat for further life on Earth. Anthropogenic pressure may continue to exacerbate the present-day problems. Prevention and mitigation of environmental issues demands sound science and dedicated political support. For that, environmental chemistry is a central and multidisciplinary science that will provide new concepts and applied methods to solve actual environmental issues. Here, we outline the scope of environmental chemistry. The Anthropocene era and major chemical disasters are discussed. We present also the challenges of atmospheric chemistry, analytical chemistry, statistics and chemometrics, and education in environmental chemistry.     

Multivariate analysis and geochemical approach for assessment of metal pollution state in sediment cores

Environmental Science and Pollution Research - Vertical distribution of metals (Cu, Zn, Cr, Fe, Mn, Pb, Ni, Cd, and Li) in four sediment core samples (C1, C2, C3, and C4) from Anzali international...     

Effect of PCM on temperature fluctuation during the door opening of a household refrigerator

Temperature fluctuation inside the cabinet of a household refrigerator significantly affects the quality of preserved food. Phase change material (PCM) is a latent heat storage system that can store and release the heat energy by changing its phase from liquid to solid and solid to liquid respectively. Therefore, use of PCM inside the refrigerator cabinet has the potential for minimizing the temperature fluctuation during the door opening and the power failure. However, very few studies in the literature were dedicated to investigating the role of PCM to reduce the temperature fluctuation. The aim of this work is to experimentally investigate the effects of PCM on temperature fluctuation inside the cabinet of a household refrigerator during the door opening and power failure. The results found that a significantly lower temperature fluctuation can be obtained using PCM. It was found that during the door opening condition the air temperature in the cabinet rose rapidly. However, when a PCM container was used, temperature variation was reduced to 3–5°C. During the power failure, the system with PCM maintained a lower temperature inside the storage chamber for a long period of time (about 2 hours). Moreover, the test results indicate that PCM maintains more stable temperature in the foodstuffs inside the refrigerator. This reduction of temperature fluctuation ultimately improves the quality of preserved food.     

AutoRAPID: A Model for Prompt Streamflow Estimation and Flood Inundation Mapping over Regional to Continental Extents

This article couples two existing models to quickly generate flow and flood‐inundation estimates at high resolutions over large spatial extents for use in emergency response situations. Input data are gridded runoff values from a climate model, which are used by the Routing Application for Parallel computatIon of Discharge (RAPID) model to simulate flow rates within a vector river network. Peak flows in each river reach are then supplied to the AutoRoute model, which produces raster flood inundation maps. The coupled tool (AutoRAPID) is tested for the June 2008 floods in the Midwest and the April‐June 2011 floods in the Mississippi Delta. RAPID was implemented from 2005 to 2014 for the entire Mississippi River Basin (1.2 million river reaches) in approximately 45 min. Discretizing a 230,000‐km² area in the Midwest and a 109,500‐km² area in the Mississippi Delta into thirty‐nine 1° by 1° tiles, AutoRoute simulated a high‐resolution (~10 m) flood inundation map in 20 min for each tile. The hydrographs simulated by RAPID are found to perform better in reaches without influences from unrepresented dams and without backwater effects. Flood inundation maps using the RAPID peak flows vary in accuracy with F‐statistic values between 38.1 and 90.9%. Better performance is observed in regions with more accurate peak flows from RAPID and moderate to high topographic relief.     

Upgraded modified forms of bituminous coal for the removal of safranin-T dye from aqueous solution

Natural bituminous coal was used as a precursor in the synthesis of different modified products. The modification of coal was performed by treating it with nitric acid (N-coal), coating its surface by zinc oxide nanoparticles (Z-coal), and converting it into porous graphite (PG). The effect of modification processes on the structures, morphologies, and optical properties was followed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrum (FT-IR), and UV/VIS spectrophotometer analysis. The surface of N-coal grains becomes smoother than the surface of raw coal grains due to the removal of the associated impurities and the formation of nitrogen function groups. For Z-coal, the whole surface of coal grains appears to be completely covered by agglomerated ZnO nanoparticles of massive density and irregular shapes. The average crystallite size of the formed ZnO is ~22.2 nm and density of dislocations is 2.029 × 10^?3 dislocation/nm². Also, the removal of safranin-T dye by natural bituminous coal and its modified forms was investigated as a function of contact time, adsorbent mass, initial dye concentration, and pH value. At pH 8, the PG showed higher efficiency (96%) than Z-coal (93.5%), N-coal (74.5%), and natural coal (62%) after 2 h for 0.1 g on 100 mg/L dye. The obtained results are well fitted by pseudo-second-order kinetic than by intraparticle diffusion and Elovich kinetic models for the adsorption by N-coal, Z-coal, and PG, whereas the adsorption by raw coal is well fitted with both pseudo-second-order and Elovich kinetic models. The Langmuir isotherm model fits well the equilibrium adsorption isotherm of safranin by raw coal and its modified forms. The values of maximum adsorption capacity were calculated for raw coal, N-coal, Z-coal, and PG to be 21.3, 27.4, 32.46, and 33.67 mg/g, respectively. A monolayer model with one energy and a monolayer model with two energies as advanced equilibrium models were investigated for more physical interpretation of the adsorption process. The calculated parameters (number of adsorbed molecules per site and number of receptor sites per unit mass) reflected the role of modification processes in the adsorption behavior of safranin.

Open image in new window

Graphical abstract High volatile bituminous coal and its modified forms have been used for the removal of Safranin-T dye from aqueous solution.

     

Occurrence of phthalates in aquatic environment and their removal during wastewater treatment processes: a review

Phthalates are plasticizers and are concerned environmental endocrine-disrupting compounds. Due to their extensive usage in plastic manufacturing and personal care products as well as the potential to leach out from these products, phthalates have been detected in various aquatic environments including drinking water, groundwater, surface water, and wastewater. The primary source of their environmental occurrence is the discharge of phthalate-laden wastewater and sludge. This review focuses on recent knowledge on the occurrence of phthalate in different aquatic environments and their fate in conventional and advanced wastewater treatment processes. This review also summarizes recent advances in biological removal and degradation mechanisms of phthalates, identifies knowledge gaps, and suggests future research directions.     

Arsenic accumulation and physiological attributes of spinach in the presence of amendments: an implication to reduce health risk

The current study examined the effect of calcium (Ca) and ethylenediaminetetraacetic acid (EDTA) on arsenic (As) uptake and toxicity to spinach (Spinacia oleracea) as well as assessed the potential human health risks. Spinach seedlings were exposed to three levels of As (25, 125, and 250 μM) alone or together with three levels of EDTA (25, 125, and 250 μM) and Ca (1, 5, and 10 mM). The effect of EDTA and Ca was assessed in terms of As contents in roots and shoots, hydrogen peroxide production, chlorophyll contents, and lipid peroxidation. The accumulation and toxicity of As to spinach plants increased with increasing As levels in nutrient solution. Exposure to As resulted in lipid peroxidation and reduced chlorophyll contents. The highest level of As alone (250 μM) showed highest human health risk (hazard quotient of 7.09 at As-250). Addition of EDTA enhanced As accumulation by spinach, while reduced As toxicity to spinach, as well as human health risk (hazard quotient of 4.01 at As-250). Similarly, Ca significantly reduced As toxicity to spinach and the human health risks (hazard quotient of 3.79 at As-250) by reducing its accumulation in spinach. Higher levels of Ca were more effective in reducing As uptake and toxicity as well as enhancing chlorophyll contents.     

Preparation and characterization of glass hollow fiber membrane for water purification applications

This work discusses the preparation and characterizations of glass hollow fiber membranes prepared using zeolite-5A as a starting material. Zeolite was formed into a hollow fiber configuration using the phase inversion technique. It was later sintered at high temperatures to burn off organic materials and change the zeolite into glass membrane. A preliminary study, that used thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared (FTIR), confirmed that zeolite used in this study changed to glass at temperatures above 1000 °C. The glass hollow fiber membranes prepared using the phase inversion technique has three different microstructures, namely (i) sandwich-like structure that originates from inner layer, (ii) sandwich-like that originates from outer layer, and (iii) symmetric sponge like. These variations were influenced by zeolite weight loading and the flow rate of water used to form the lumen. The separation performances of the glass hollow fiber membrane were studied using the pure water permeability and the rejection test of bovine serum albumin (BSA). The glass hollow fiber membrane prepared from using 48 wt% zeolite loading and bore fluid with 9 mL min^?1 flow rate has the highest BSA rejection of 85% with the water permeability of 0.7 L m^?2 h^?1 bar^?1. The results showed that the separation performance of glass hollow fiber membranes was in the ultrafiltration range, enabled the retention of solutes with molecular sizes larger than 67 kDa such as milk proteins, endotoxin pyrogen, virus, and colloidal silica.     

Role of non-timber forest products in sustaining forest-based livelihoods and rural households' resilience capacity in and around protected area: a Bangladesh study†

People in the developing world derive a significant part of their livelihoods from various forest products, particularly non-timber forest products (NTFPs). This article attempts to explore the contribution of NTFPs in sustaining forest-based rural livelihood in and around a protected area (PA) of Bangladesh, and their potential role in enhancing households' resilience capacity. Based on empirical investigation, our study revealed that local communities gather a substantial amount of NTFPs from national park despite the official restrictions. Twenty seven percent households (HHs) of the area received at least some cash benefit from the collection, processing and selling of NTFPs, and NTFPs contribute to HHs' primary, supplementary and emergency sources of income. NTFPs also constituted an estimated 19% of HHs' net annual income, and were the primary occupation for about 18% of the HHs. HHs' dependency on nearby forests for various NTFPs varied vis-à-vis their socio-economic condition, as well as with their location from the park. Based on our case study, the article also offers some clues for improving the situation in PA.