Pollution magnet: nano-magnetite for arsenic removal from drinking water

Arsenic contamination in groundwater is a severe global problem, most notably in Southeast Asia where millions suffer from acute and chronic arsenic poisoning. Removing arsenic from groundwater in impoverished rural or urban areas without electricity and with no manufacturing infrastructure remains a significant challenge. Magnetite nanocrystals have proven to be useful in arsenic remediation and could feasibly be synthesized by a thermal decomposition method that employs refluxing of FeOOH and oleic acid in 1-octadecene in a laboratory setup. To reduce the initial cost of production, $US 2600/kg, and make this nanomaterial widely available, we suggest that inexpensive and accessible “everyday” chemicals be used. Here we show that it is possible to create functional and high-quality nanocrystals using methods appropriate for manufacturing in diverse and minimal infrastructure, even those without electricity. We suggest that the transfer of this knowledge is best achieved using an open source concept.     

Clean electrochemical deposition of calcium carbonate to prevent scale formation in cooling water systems

Calcium carbonate (CaCO₃) deposited in water systems leads to scale formation, decreases flow rate, reduces heat transfer and favors microbial proliferation of toxic bacteria such as Legionella. This issue may be solved by electrochemical deposition, without adding toxic chemicals. Therefore, we studied here the deposition of CaCO₃ by electrochemical reduction of oxygen into hydroxide ions with stainless steel and titanium (Ti) working electrodes. Analysis was done using cyclic voltammetry, chronoamperometry, dynamic impedance spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy (EDX) coupled with X-ray diffraction (XRD). Results show that optimal formation of CaCO₃ is done at ?1.2 V with the stainless steel electrode and at ?1.4 V for the Ti electrode. More negative potentials induce the formation of calcite. Using the Ti electrode, we found that aragonite is the major form (82 %), with only one capacitive loop. Using the stainless steel electrode at 1.2 V, we found 47 % of aragonite and 38 % of calcite. Overall, our findings demonstrate the feasibility of the electrochemical deposition of CaCO₃ in cooling water systems, without the addition of any chemical.     

Removing ammonia from air with a constant pH,slightly acidic water spray wet scrubber using recycled scrubbing solution

Slightly acidic solutions are a practical means of removing ammonia from air Scrubbed NH₃ accumulates in solution as NH₄⁺ and should be an excellent fertilizer Increased air velocity decreased NH₃ removal and increased NH₄⁺ collection Previous research on wet scrubbers has only studied highly acidic scrubbing solutions because of their high ammonia capture efficiencies; however, the high acidity created practical problems. Lower acidity solutions would reduce corrosion, maintenance, and cost; however, designers may need to use strategies for increasing scrubber effectiveness, such as using lower air velocities. The objective of this study was to determine if a spray scrubber with slightly acidic and higher pH scrubbing solution (pH from 2 to 8) could effectively remove NH₃ from NH₃ laden air (such as animal building exhaust air), and also collect this valuable resource for later use as a fertilizer. A bench-scale spray wet scrubber treated 20 ppmv NH₃/air mixture in a countercurrent contact chamber. First, the solution pH was varied from 2 to 8 while maintaining constant air velocity at 1.3 m·s⁻¹. Next, air velocity was increased (2 and 3 m·s⁻¹) while solution pH remained constant at pH6. At 1.3 m·s⁻¹, NH₃ removal efficiencies ranged between 49.0% (pH8) and 84.3% (pH2). This study has shown that slightly acidic scrubbing solutions are a practical means of removing ammonia from air especially if the scrubber is designed to increase collisions between solution droplets and NH₃ molecules. The NH₃ removed from the air was held in solution as NH₄⁺ and accumulates over time so the solution should be an excellent fertilizer.     

Shark aggregation and tourism: opportunities and challenges of an emerging phenomenon

In the last few winters, shark communities have been aggregating near the Israeli Mediterranean coast, at a specific point, near Hadera power station. This unusual phenomenon has fascinated residents, visitors, kayakers, divers, and swimmers. We analyse the effects of this intense human interest on the sharks, using contingent behaviour, in Hadera and in Ashkelon, where sharks are present and there is available infrastructure for their observation. We also report on changes in shark behaviour due to change in tourism intensity. We find a change of about ILS 4.1 million annually for both sites but a larger individual consumer surplus in Hadera, where sharks are currently observable. Touristic intensity crosses the threshold level by about 12% and making the socio-equilibrium sustainable for both humans and sharks would have a social cost of ILS 0.157 million. This paper, which is based on the assessment of conservation values to marine and coastal tourists, raises a need for spatial planning in order to protect this endangered species.     

Fingerprinting of petroleum hydrocarbons (PHC) and other biogenic organic compounds (BOC) in oil-contaminated and background soil samples

Total petroleum hydrocarbons (TPH) or petroleum hydrocarbons (PHC) are one of the most widespread soil contaminants in Canada, the United States and many other countries worldwide. Clean-up of PHC-contaminated soils costs the Canadian economy hundreds of millions of dollars annually. In Canada, most PHC-contaminated site evaluations are based on the methods developed by the Canadian Council of the Ministers of the Environment (CCME). However, the CCME method does not differentiate PHC from BOC (the naturally occurring biogenic organic compounds), which are co-extracted with petroleum hydrocarbons in soil samples. Consequently, this could lead to overestimation of PHC levels in soil samples. In some cases, biogenic interferences can even exceed regulatory levels (300 μg g(-1) for coarse soils and 1300 μg g(-1) for fine soils for Fraction 3, C(16)-C(34) range, in the CCME Soil Quality Level). Resulting false exceedances can trigger unnecessary and costly cleanup or remediation measures. Therefore, it is critically important to develop new protocols to characterize and quantitatively differentiate PHC and BOC in contaminated soils. The ultimate objective of this PERD (Program of Energy Research and Development) project is to correct the misconception that all detectable hydrocarbons should be regulated as toxic petroleum hydrocarbons. During 2009-2010, soil and plant samples were collected from over forty oil-contaminated and paired background sites in various provinces. The silica gel column cleanup procedure was applied to effectively remove all target BOC from the oil-contaminated sample extracts. Furthermore, a reliable GC-MS method in combination with the derivatization technique, developed in this laboratory, was used for identification and characterization of various biogenic sterols and other major biogenic compounds in these oil-contaminated samples. Both PHC and BOC in these samples were quantitatively determined. This paper reports the characterization results of this set of 21 samples. In general, the presence of petroleum-characteristic alkylated PAH homologues and biomarkers can be used as unambiguous indicators of the contamination of oil and petroleum product hydrocarbons; while the absence of petroleum-characteristic alkylated PAH homologues and biomarkers and the presence of abundant BOC can be used as unambiguous indicators of the predominance of natural organic compounds in soil samples.     

Reductive Dechlorination of Tetrachloroethylene by Soil Sulfate-Reducing Microbes under Various Electron Donor Conditions

Biotransformation of tetrachloroethylene (PCE) by soil sulfate-reducing bacteria was investigated using acetate, lactate and methanol as electron donors. Results show that the effectiveness of biotransformation of PCE by soil sulfate-reducing bacterial is dependent upon the type of electron donor used.     

Forecasting of daily total atmospheric ozone in Isfahan

A neural network combined to an artificial neural network model is used to forecast daily total atmospheric ozone over Isfahan city in Iran. In this work, in order to forecast the total column ozone over Isfahan, we have examined several neural networks algorithms with different meteorological predictors based on the ozone-meteorological relationships with previous day's ozone value. The meteorological predictors consist of temperatures (dry and dew point) and geopotential heights at standard levels of 100, 50, 30, 20 and 10 hPa with their wind speed and direction. These data together with previous day total ozone forms the input matrix of the neural model that is based on the back propagation algorithm (BPA) structure. The output matrix is the daily total atmospheric ozone. The model was build based on daily data from 1997 to 2004 obtained from Isfahan ozonometric station data. After modeling these data we used 3 year (from 2001 to 2003) of daily total ozone for testing the accuracy of model. In this experiment, with the final neural network, the total ozone are fairly well predicted, with an Agreement Index 76%.     

Distribution and Fractionation of Heavy Metals in Solid Waste from Selected Sites in the Industrial Belt of Delhi, India

Solid waste samples were collected from five small-scale industrial sites in the National Capital Territory (NCT) of Delhi. These industrial sites represent the regional spread of the industrial belt in the NCT of Delhi. Solid waste samples were digested using aqua-regia and HF in air tight teflon bombs for the quantitative analysis of heavy metals (Hg, Pb, Cd, Mn, Fe, Ni, Cu and Zn) by GBC model 902 atomic absorption spectrophotometer. Hg was analysed using hydrid generator attachment. Beside this sequential extraction was used to fractionate five heavy metals (Pb, Ni, Cd, Cu and Zn) into six operationally defined phases, viz. water soluble, exchangeable, carbonate-bound, Fe-Mn oxides, organic-bound and residual fractions to ascertain the relative mobility of these metals. The result obtained showed metal concentration to be in the range of Hg 0.42-2.3; Pb 23-530; Cd 014-224; Mn 494-19 964; Fe 35 684-233 119; Ni 192-1534; Cu 3065-10 144 and Zn 116-23 321 (all units in mg kg(-1)) in all the industrial areas studied. The fractionated toxic metals like Pb, Ni and Cd were observed to be in the range of 25-35, 15-50 and 40-50%, respectively, in mobile or bio-available fractions of solid waste. As this waste is often disposed-off by the roadsides, low lying areas, abandoned quarries or in landfill sites which are often not properly planned, thus posing potential risk to ground and surface water quality to millions of people living downstream.     

Aqueous, solid and gaseous partitioning of selenium in an oxic sandy soil under different microbiological states

The aim of this study was to investigate the role of microorganisms on the behaviour of selenium in natural soil maintained under strictly aerobic conditions. Six-day batch experiments were performed with soils constrained to different microbiological states, either by sterilisation or by adding organic substrates. Selenium was added to the soil as selenite. The distribution of selenium in the gaseous, liquid and solid phases of the batch was measured. Selenium partitioning between the various solid phases was investigated by chemical sequential extractions. Active microorganisms played major effects on the distribution of selenium within the soil. On the one hand, microorganisms could promote selenium volatilisation (in relatively small amounts), leading to the spreading of selenium compounds outside the soil. On the other hand, microbial activities increased both amount of selenium retained by the soil and the strength of its retention (less exchangeable selenium), making selenium less susceptible to remobilisation.     

Efficiency of triggered barriers in dust explosion suppression in galleries

The paper describes large-scale tests of triggered barriers of different design. Main stress was put on examining suitability of the flame detector developed in US Bureau of Mines to work as a trigger for the barriers. It was found that the detector works satisfactorily with the barriers of different design providing a suitable mean to suppress explosions in galleries, either in mines or in other industries.