A quantitative approach to the traffic air quality problem: the Traffic Air Quality index

The Traffic Air Quality (TAQ) model is a simple tool to estimate traffic fine particulate emissions on roadways (g/km) and can be used for both real-time analysis and for localized conformity analysis ("hot-spot" analysis for nonattainment areas) as defined by 40 CFR 93.123. This paper is a follow-up to a study published earlier regarding the development of the TAQ model. This paper shows how local air quality levels can be a factor in traffic management in nonattainment areas. Similar to the industrial source quotas measured in tons per year, it is proposed that road segments are to be assigned emission quotas (or TAQ indices) measured in pollutant mass emitted per road length (g/km) above which traffic-measures have to be taken to reduce the fine-particulates emissions on such road links. The TAQ model as well as traffic-rerouting measures along with the Intelligent Transportation System (ITS) protocols can be used to have a real-time control of the traffic conditions along expressways to maintain the fine-particulates emissions below the quota assigned per road link and consequently improving the over all local air quality in nonattainment areas.     

Value addition in the services sector and its heterogeneous impacts on CO2 emissions: revisiting the EKC hypothesis for the OPEC using panel spatial estimation techniques

Environmental Science and Pollution Research - This study examines the Environmental Kuznets Curve (EKC) hypothesis in the context of 12 members of the OPEC by utilizing data on both the aggregate...     

Reservoir water quality: a case from Jordan

Jordan relies heavily on reservoirs building and development to cope with water supply challenges, where monitoring and assessment of reservoir water quality are critically important for the sustainable use of these water supplies. Mujib Dam is an important water supply source in central western Jordan. Evaluation of water quality parameters and their spatial distributions (vertical and horizontal) showed near-neutral pH values with nearly similar values from surface to bottom. The vertical profile of DO and TDS in the dammed reservoir showed slight decreasing trends with increasing depth. Although Ca, Mg, Na, and K concentrations varied slightly with depths, their variations showed no trends. Similarly, the vertical and horizontal distribution patterns of Cl, SO₄, HCO₃, NO₃, and PO₄ in Mujib reservoir water showed insignificant variations in surface water layer and relatively unchanged values or decreasing trends through the water column. Higher values of TN have been observed, especially in the western part, suggesting that agricultural activities and livestock farming in the upstream catchment are impacting water quality. Results revealed that weathering and dissolution of rocks are the major source of water chemistry. The majority of trace metal levels (Cd, Cr, Cu, Fe, Mn, Pb, Zn, Co, Ni, Sr, and B) in water showed relatively similar surface and bottom values. The concentrations of COD and BOD₅ in surface water were relatively low with higher concentrations observed in the northwestern corner, coincided with higher levels of chlorophyll a. The average ratio of TN to TP in surface water suggests that phosphorus is the limiting factor for the algal blooms, whereas the average chlorophyll a level in surface water indicates oligo-mesotrophic water.     

Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Integration of biodiversity in urban planning instruments in developing countries: the case of Kumasi Metropolitan Assembly,Ghana

There is a growing concern about integrating biodiversity into urban planning, yet, discussions are concentrated on science-informed planning in general. Few have explored the integration of biodiversity in specific planning instruments, especially in African cities. This paper examines how and what components of biodiversity are integrated into master plans, medium-term plans, building codes, zoning codes and permits in Kumasi City, Ghana. There is limited integration of biodiversity in most planning instruments as they were mostly designed on the basis of health, safety and economy. Allied to lack of funding and public participation, biodiversity in Kumasi is under significant threat from rapid urban development. Creating an opportunity for popular participation and decentralizing the planning system could set the preconditions for local integration and revision of instruments. Simplifying the definition of biodiversity could increase local planners’ appreciation, understanding and their ability to make use of biodiversity data.     

Sorption–desorption of imidacloprid onto a lacustrine Egyptian soil and its clay and humic acid fractions

Sorption–desorption of the insecticide imidacloprid 1-[(6-chloro-3-pyridinyl)-methyl]-N-nitro-2-imidazolidinimine onto a lacustrine sandy clay loam Egyptian soil and its clay and humic acid (HA) fractions was investigated in 24-h batch equilibrium experiments. Imidacloprid (IMDA) sorption–desorption isotherms onto the three sorbents were found to belong to a non-linear L-type and were best described by the Freundlich model. The value of the IMDA adsorption distribution coefficient, Kd_ads, varied according to its initial concentration and was ranged 40–84 for HA, 14–58 for clay and 1.85–4.15 for bulk soil. Freundlich sorption coefficient, Kf_ads, values were 63.0, 39.7 and 4.0 for HA, clay and bulk soil, respectively. The normalized soil Koc value for imidacloprid sorption was ～800 indicating its slight mobility in soils. Nonlinear sorption isotherms were indicated by 1/n_ads values <1 for all sorbents. Values of the hysteresis index (H) were <1, indicating the irreversibility of imidacloprid sorption process with all tested sorbents. Gibbs free energy (ΔG) values indicated a spontaneous and physicosorption process for IMDA and a more favorable sorption to HA than clay and soil. In conclusion, although the humic acid fraction showed the highest capacity and affinity for imidacloprid sorption, the clay fraction contributed to approximately 95% of soil-sorbed insecticide. Clay and humic acid fractions were found to be the major two factors controlling IMDA sorption in soils. The slight mobility of IMDA in soils and the hysteresis phenomenon associated with the irreversibility of its sorption onto, mainly, clay and organic matter of soils make its leachability unlikely to occur.     

Management of fresh water weeds (macrophytes) by vermicomposting using Eisenia fetida

In the present study, potential of Eisenia fetida to recycle the different types of fresh water weeds (macrophytes) used as substrate in different reactors (Azolla pinnata reactor, Trapa natans reactor, Ceratophyllum demersum reactor, free-floating macrophytes mixture reactor, and submerged macrophytes mixture reactor) during 2 months experiment is investigated. E. fetida showed significant variation in number and weight among the reactors and during the different fortnights (P <0.05) with maximum in A. pinnata reactor (number 343.3?±?10.23 %; weight 98.62?±?4.23 % ) and minimum in submerged macrophytes mixture reactor (number 105?±?5.77 %; weight 41.07?±?3.97 % ). ANOVA showed significant variation in cocoon production (F₄?=?15.67, P <0.05) and mean body weight (F₄?=?13.49, P <0.05) among different reactors whereas growth rate (F₃?=?23.62, P <0.05) and relative growth rate (F₃?=?4.91, P <0.05) exhibited significant variation during different fortnights. Reactors showed significant variation (P <0.05) in pH, Electrical conductivity (EC), Organic carbon (OC), Organic nitrogen (ON), and C/N ratio during different fortnights with increase in pH, EC, N, and K whereas decrease in OC and C/N ratio. Hierarchical cluster analysis grouped five substrates (weeds) into three clusters—poor vermicompost substrates, moderate vermicompost substrate, and excellent vermicompost substrate. Two principal components (PCs) have been identified by factor analysis with a cumulative variance of 90.43 %. PC1 accounts for 47.17 % of the total variance represents “reproduction factor” and PC2 explaining 43.26 % variance representing “growth factor.” Thus, the nature of macrophyte affects the growth and reproduction pattern of E. fetida among the different reactors, further the addition of A. pinnata in other macrophytes reactors can improve their recycling by E. fetida.     

Cadmium in blood of Tunisian men and risk of bladder cancer: interactions with arsenic exposure and smoking

Prior investigations identified an association between low-level blood arsenic (As) and bladder cancer risk among Tunisian men but questions remain regarding confounding by cadmium (Cd), a well-established bladder carcinogen. A case–control study of Tunisian men was re-examined to assess the levels of cadmium in blood and reparse the association between the simultaneous exposure to these metals and bladder cancer risk. Levels of blood Cd were significantly twice higher among cases than in controls (P?<?0.05) and were positively correlated with smoking and age. Additionally, analysis of metal levels among non-smokers according to the region of residence showed very high blood Cd and As levels for the coastal regions of Sfax and central Tunisia. After controlling for potential confounders, for low blood As levels (<0.67 μg/L), the OR for blood Cd was 4.10 (95 % CI 1.64–10.81), while for higher levels (>0.67 μg/L), it was reduced to 2.10 (CI, 1.06–4.17). Adjustment for Cd exposure did not alter the risk associated to As exposure. This study is the first to report the relationship between Cd exposure and risk of bladder cancer occurrence in interaction with smoking and As exposure. Smoking is shown to be the main exposure source to Cd in the Tunisian population but also environmental pollution seems to be responsible of Cd exposure among non-smokers. Exposure assessment studies encompassing a wider population are needed.     

Monitoring health implications of pesticide exposure in factory workers in Pakistan

The study aimed to determine the hazardous health effects of pesticides exposure in the factory workers by measuring plasma cholinesterase (PChE), pesticides residues, and renal and hepatic biochemical markers. In addition, we also assessed the knowledge, attitudes, and safety practices adopted by the industrial workers. The study was conducted in three different sizes of factories located in Lahore (large), Multan (medium), and Karachi (small) in Pakistan. Total 238 adult males consisting of 184 pesticide industrial workers (exposed group) from large-sized (67), medium-sized (61), small-sized (56) industrial formulation factories, and 54 controls (unexposed) were included in the study. All the participants were male of aged 18 to 58 years. PChE levels were estimated by Ellmann’s method. Plasma pesticides residue analysis was performed by using reverse phase C-18 on high-performance liquid chromatograph and GC with NPD detector. Plasma alanine aminotransferase (ALT), aspartate aminotransferase (AST), creatinine, urea, and gamma glutamyltransferase (GGT) were measured on Selectra E auto analyzer. Plasma and C-reactive protein was analyzed by Immulite 1000. The results revealed a significant decrease in plasma post exposure PChE levels (<30%) as compared to baseline in the workers of small (29%) and medium (8%) industrial units (p?< 0.001). Plasma cypermethrin, endosulfan, imidacloprid, thiodicarb, carbofuran, and methamidophos levels were found to be higher than allowable daily intake. Serum AST, ALT, creatinine GGT, malondialdehyde, total antioxidant, and CRP were significantly raised among the workers of small and medium pesticide formulation factories as compared to large industrial unit and controls (p?< 0.001). The study demonstrated that unsafe practices among small- and medium-sized pesticides industrial workers cause significant increase in pesticide exposure, oxidative stress, and derangement of hepatic and renal function.     

Decision support methods for the environmental assessment of contamination at mining sites

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a ‘holistic’ approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.