Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.     

POLYNOMIAL-BASED DISAGGREGATION OF HOURLY RAINFALL FOR CONTINUOUS HYDROLOGIC SIMULATION1

Hydrologic modeling of urban watersheds for designs and analyses of stormwater conveyance facilities can be performed in either an event-based or continuous fashion. Continuou simulation requires, among other things, the use of a time series of rainfall amounts. However, for urban drainage basins, which are typically small, the temporal resolution of the rainfall time series must be quite fine, and often on the order of 5 to 15 minutes. This poses a significant challenge because rainfall-gauging records are usually kept only for hourly or longer time steps. The time step sizes in stochastic rainfall generators are usually also too large for application to urban runoff modeling situations. Thus, there is a need for methods by which hourly rainfall amounts can be disaggregated to shorter time intervals. This paper presents and compares a number of approaches to this problem, which are based on the use of polynomial approximating functions. Results of these evaluations indicate that a desegregation method presented by Ormsbee (1989) is a relatively good performer when storm durations are short (2 hours), and that a quadratic spline-based approach is a good choice for longer-duration storms. Based on these results, the Ormsbee technique is recommended because it provides good performance, and can be applied easily to long time series of precipitation records. The quadratic spline-based approach is recommended as a close second choice because it performed the best most consistently, but remains more difficult to apply than the Ormsbee technique. Results of this study also indicate that, on average, all of the disaggregation methods evaluated introduce a severe negative bias into maximum rainfall intensities. This is cause for some well-justified concern, as the characteristics of runoff hydrographs are quite sensitive to maximum storm intensities. Thus, there is a need to continue the search for simple yet effective hourly rainfall disaggregation methods.     

Assessing the genotoxic potentials of arsenic in tilapia (Oreochromis mossambicus) using alkaline comet assay and micronucleus test

This experiment was conducted to study the genotoxic potentials of sodium arsenite (NaAsO₂) in freshwater fish Oreochromis mossambicus by using alkaline comet assay and micronucleus (MN) test. Fish were exposed to three different concentrations (3 ppm, 28 ppm and 56 ppm) of arsenic and gill, liver and blood tissue samples were collected after 48 h, 96 h and 192 h of exposure. Arsenic exposure induced DNA damage in all tissues examined in a concentration dependent manner. A significant (p < 0.05) increase in the comet tail DNA (%) of the exposed fish liver, gill, and blood was observed after 48 h and 96 h of exposure, but a decline in DNA damage was recorded in all the tissues at all the three concentrations studied after 192 h of exposure. Liver tissue exhibited significantly (p < 0.05) higher DNA damage at all the concentrations examined, followed by gill and blood. Higher liver tail DNA (51.38 ± 0.21%) refers that it is more prone to injury to arsenic toxicity than the gill and blood. In blood samples arsenic induced micronucleus formation in a concentration dependent manner and highest (5.8 ± 0.46%) value was recorded in 56 ppm after 96 h of exposure, whereas, it was decreased after 192 h of exposure at all the three concentrations of NaAsO₂ examined which refers to the DNA repairing ability of fish to arsenic toxicity. The results of this study depict the genotoxic potentials of arsenic to fish which in turns provide insight on advanced study in aquatic toxicology.     

Measurement of black carbon (BC) by an optical method and a thermal-optical method: Intercomparison for four sites

Comparison of black carbon (BC) measurements obtained by two methods was performed for aerosols samples collected on Whatman 41 (W-41) filters, using an optical method (Magee Scientific Optical Transmissometer Model OT-21) and a thermal-optical method (Sunset Laboratory Thermal-optical analyzer). Samples were collected from four sites: Albany (a small urban site, NY), Antalya (coastal site, Turkey), Whiteface Mountain (remote site, NY) and Mayville (rural site, NY). At Albany, comparison between the two methods showed excellent agreement; a least-squares regression line yielded a slope of 1.02, and r² = 0.88. Similar comparisons at Antalya (slope of 1.02, r² = 0.5) and Whiteface Mountain (slope of 0.92 and r² = 0.58) also gave very good relationship. At Mayville, the relationship between the two methods yielded somewhat lower regression: a slope of 0.75, and r² = 0.44. The data from the four locations, when plotted together, yielded an excellent agreement: a slope of 0.91, and r² of 0.84. Based on our measurements, it appears that optical measurement using the OT-21 can be successfully applied to determination of BC in W-41 filters. However, because of the variability in the chemical composition of BC aerosol at different locations, it is suggested that the calibration of OT-21 when using W-41 filters should be performed with a statistically significant numbers of samples for specific sites.     

Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Levoglucosan and other cellulose and lignin markers in emissions from burning of Miocene lignites

Levoglucosan (L), mannosan (M), galactosan (G) and other cellulose and lignin markers from burn tests of Miocene lignites of Poland were determined by gas chromatography–mass spectrometry (GC–MS) to assess their distributions and concentrations in the smoke. Their distributions were compared to those in the pyrolysis products of the lignites. Levoglucosan and other anhydrosaccharides are products from the thermal degradation of cellulose and hemicellulose and are commonly used as tracers for wood smoke in the atmosphere. Here we report emission factors of levoglucosan in smoke particulate matter from burning of lignite varying from 713 to 2154 mg kg^?1, which are similar to those from burning of extant plant biomass. Solvent extracts of the lignites revealed trace concentrations of native levoglucosan (0.52–3.7 mg kg^?1), while pyrolysis yielded much higher levels (1.6–3.5 × 10⁴ mg kg^?1), indicating that essentially all levoglucosan in particulate matter of lignite smoke is derived from cellulose degradation. The results demonstrate that burning of lignites is an additional input of levoglucosan to the atmosphere in regions where brown coal is utilized as a domestic fuel. Interestingly, galactosan, another tracer from biomass burning, is not emitted in lignite smoke and mannosan is emitted at relatively low concentrations, ranging from 7.8 to 70.5 mg kg^?1. Thus, we propose L/M and L/(M + G) ratios as discriminators between products from combustion of lignites and extant biomass. In addition, other compounds, such as shonanin, belonging to lignans, and some saccharides, e.g., α- and β-glucose and cellobiose, are reported for the first time in extracts of bulk lignites and of smoke particulate matter from burning these lignites.     

Degradation of aldrin and endosulfan in rotary drum and windrow composting

Removal efficiencies, kinetics and degradation pathways of aldrin, endosulfan α and endosulfan β in vegetable waste were evaluated during rotary drum and conventional windrow composting. The highest percentage removal of aldrin, endosulfan α and endosulfan β in rotary drum composting was 86.8, 83.3 and 85.3% respectively, whereas in windrow composting, it was 66.6%, 77.7% and 67.2% respectively. The rate constant of degradation of aldrin, endosulfan α and endosulfan β during rotary drum composting ranged from 0.410–0.778, 0.057–0.076 and 0.009–0.061 day^?1 respectively. The pathways of degradation of these pesticides in composting process were proposed. Metabolites dieldrin and 1 hydroxychlorodene formed during composting of aldrin in the vegetable waste indicated the occurrence of epoxidation reaction and oxidation of bridge carbon of aldrin containing the methylene group. Formation of chloroendic acid and chloroendic anhydride during composting of endosulfan containing vegetable waste support the occurrence of endosulfan sulfate and dehydration reaction respectively.     

Elusive Partnerships: Gas extraction and CSR in Bangladesh

This paper examines Chevron's programme of CSR at a gas field in Bangladesh. Whilst apparently building partnerships in the villages that surround the Bibiyana Gas Field, we suggest that the corporation remains detached from the local population via their community development programmes and employment policies. This contradiction is submerged by ideas and practices within global development discourse which celebrate the disconnection and disengagement of donors via the rhetoric of sustainability. Chiming with development praxis and the neo-liberal values which underscore it by stressing self-reliance, entrepreneurship and ‘helping people to help themselves’, the corporation's Community Engagement Programme does little to meet the demands of local people who hoped for employment and long term investment, a form of connection that is discordant to discourses of self-reliance and sustainability.     

Community attitudes toward forest conservation programs through collaborative protected area management in Bangladesh

The formulation of conservation policies with options for creating protected areas is significantly influenced by the social factors of the surrounding communities. Therefore, indigenous knowledge, attitudes and perceptions of the local communities need to be explored during the planning and implementation stages of conservation projects. A government-initiated experiment in co-management was conducted in the Rema-Kalenga Wildlife Sanctuary, Bangladesh. This paper analyzes the attitudes toward conservation by members of local communities living in and around the wildlife sanctuary. Training incentives on alternative income-generating (AIG) activities and allotment of agricultural lands were distributed among the Forest User Groups. It is of interest to policy makers and resource managers whether this technique leads to improved attitudes on the part of local people. Although there were different attitudes toward protected areas and conservation, overall, a favorable attitude of the respondents was observed. The opinions of respondents also varied based on factors such as village position, village dependency level on forest resources, ethnicity and gender. Increase in annual income resulting from the augmented skills by trainings on AIG activities and getting agricultural lands leased from the Forest Department contributed significantly to the variation in respondents’ conservation attitudes. It is suggested that eliminating inequity and inequality in incentive distribution, discovering and launching training on more need-based livelihood activities, and liberalizing the restriction of resource extraction from the protected area by fixing the harvesting limit would encourage the community to be more cordially and actively involved in the conservation efforts of the sanctuary.     

An Interactive Governance and Fish Chain Approach to Fisheries Rebuilding: A Case Study of the Northern Gulf Cod in Eastern Canada

Rebuilding collapsed fisheries is a multifaceted problem, requiring a holistic governance approach rather than technical management fixes. Using the Northern Gulf cod case study in eastern Canada, we illustrate how a “fish chain” framework, drawn from the interactive governance perspective, is particularly helpful in analyzing rebuilding challenges. The analysis demonstrates that factors limiting rebuilding exist along the entire fish chain, i.e., the pre-harvest, harvest, and post-harvest stages. These challenges are embedded in both the ecological and social systems associated with the Northern Gulf cod fisheries, as well as in the governing systems. A comparative analysis of the pre- and post-collapse of the cod fisheries also reveals governance opportunities in rebuilding, which lie in policy interventions such as integrated and ecosystem-based management, livelihood transitional programs, and cross-scale institutional arrangements. Lessons from the Northern Gulf cod case study, especially the missed opportunities to explore alternative governing options during the transition, are valuable for rebuilding other collapsed fisheries.