Phenol removal from aqueous environments by natural & chemically modified kaolin clay

Natural, acid and base modified kaolin clays were studied for the sake of phenol and 4-chlorophenol removal from aqueous environments and their application to real ground and industrial wastewater samples. Scanning electron microscope (SEM), infrared spectroscopy (IR), X-ray diffraction (XRD), Thermo Gravimetric Analysis (TGA), Differential Thermal Analysis (DTA), and Surface area analysis were employed for characterization of the adsorbents microstructure. Operating factors such as adsorbent dose, solution pH, initial phenol concentration, and contact time were studied. The experimental data displayed that the increase of the adsorbent dose, contact time, and pH value from 2 to 7 increases the efficiency of the removal process. Optimal conditions for phenolic removal were; contact time of 300 min, primary phenol solution of 25 mg/L, pH 7 and 2.5 g/L as an appropriate adsorbent dose using crude (natural), acid modified and base modified kaolin clays. The higher phenolic removal efficiencies were obtained at 5 mg/L as 90, 97, 96.2%, respectively, for the adsorbents in the previously mentioned order. The adsorption capacity in the removal of phenol and 4-chlorophenol were 7.481 and 4.195, 8.2942 and 3.211, and 8.05185 and 18.565 mg/g, respectively, for the adsorbents in the same mentioned order. The adsorption equilibrium data were fitted and analyzed with four isotherm models, namely, Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm equations. The adsorption process of phenol on studied adsorbents was exothermic, spontaneous and thermodynamically favorable proved by the negative values of their thermodynamic parameters ΔH° and ΔG°. The correlation coefficient (R²) for all concentrations was higher than 0.94, which indicates that in the studied system, the data suitably fit the first-order kinetics. The % desorption capacity was amounted to 96%, 91.11%, and 87.06% of adsorbed phenol, respectively, for the adsorbents in the previous order using 0.1N NaOH and 10% V/V ethanol solutions as eluents at 25°C, indicating the reusability of the adsorbents. Kaolin and its modified forms can be introduced as eco-friendly and low-cost adsorbents in water remediation implementation.     

Assessment of radiological hazard of NORM in Margalla Hills limestone, Pakistan

Studies on naturally occurring radioactive material (NORM) in the limestone from the Margalla Hills have been carried out by measuring gamma activity and to access its radiological implications if any. For data acquisition, a High-Purity Germanium detector was employed. The activity concentrations of (226)Ra, (232)Th, and (40)K were found to be 14.32?±?0.24, 2.05?±?0.04, and 13.80?±?0.20 Bq kg(-1), respectively. These values are relatively lower as compared to that in the limestone of other countries and much lower than the values reported for the natural building stones. The average specific activities due to (226)Ra were found to be higher when compared with (40)K and (232)Th. Indices of radium equivalent activity (Ra(eq)), internal hazard (H(in)), indoor absorbed gamma dose rate (D(R,)), and corresponding annual effective dose (E(eff)) were also determined for the limestone-made rooms. All of these indices were found to be in the lower ranges. The Margalla Hills limestone does not pose any excessive radiological health hazard as a building material and in industrial uses for a common man.     

Dual Function of Cellulose Triacetate–Graft–Polymethacrylic Acid Films for Dyes Removal and for High-Dose Radiation Dosimetry

Graft copolymerization of methacrylic acid (MAc) onto cellulose triacetate (CTA) films was conducted by gamma rays. The grafting conditions were optimized. The structure of grafted CTA films was characterized by Fourier transform infra red–attenuated total reflection, scanning electron microscopy, thermal gravimetric analysis, CHNS/O microanalyzer and, surface area and porosity analyzer. The grafted CTA films were exploited in adsorption of ethyl violet (EV) and phenol red (PR) dyes. The adsorption capacity of the grafted CTA films was investigated at various variables. The adsorption isotherms and kinetic study were examined. Further, the dyed grafted CTA films were used in measurements of high dose radiation. The results indicate that the useful dose range extents up to 440 and 300 kGy for EV and PR, respectively. The effects of relative humidity during irradiation, shelf-life, pre- and post-irradiation storage in dark and indirect daylight conditions on dosimeters performance were investigated.     

Machine learning and computational chemistry to improve biochar fertilizers: a review

Traditional fertilizers are highly inefficient, with a major loss of nutrients and associated pollution. Alternatively, biochar loaded with phosphorous is a sustainable fertilizer that improves soil structure, stores carbon in soils, and provides plant nutrients in the long run, yet most biochars are not optimal because mechanisms ruling biochar properties are poorly known. This issue can be solved by recent developments in machine learning and computational chemistry. Here we review phosphorus-loaded biochar with emphasis on computational chemistry, machine learning, organic acids, drawbacks of classical fertilizers, biochar production, phosphorus loading, and mechanisms of phosphorous release. Modeling techniques allow for deciphering the influence of individual variables on biochar, employing various supervised learning models tailored to different biochar types. Computational chemistry provides knowledge on factors that control phosphorus binding, e.g., the type of phosphorus compound, soil constituents, mineral surfaces, binding motifs, water, solution pH, and redox potential. Phosphorus release from biochar is controlled by coexisting anions, pH, adsorbent dosage, initial phosphorus concentration, and temperature. Pyrolysis temperatures below 600 °C enhance functional group retention, while temperatures below 450 °C increase plant-available phosphorus. Lower pH values promote phosphorus release, while higher pH values hinder it. Physical modifications, such as increasing surface area and pore volume, can maximize the adsorption capacity of phosphorus-loaded biochar. Furthermore, the type of organic acid affects phosphorus release, with low molecular weight organic acids being advantageous for soil utilization. Lastly, biochar-based fertilizers release nutrients 2–4 times slower than conventional fertilizers.

     

Synthesis,Characterization and NH<Subscript>3</Subscript>/N<Subscript>2</Subscript> Gas Permeation Study of Nanocomposite Membranes

Carbon nanotubes have exceptional mechanical properties which make them very attractive for the development of composite membranes. In this research, NH₃/N₂ gas permeation behavior of flat sheet composite membranes was examined. The cellulose acetate-multiwalled carbon nanotubes composite membranes were synthesized using solution casting method. The morphology and dispersion of carbon nanotubes were observed through SEM. However, the composite membranes were also characterized using several analytical techniques such as X-ray diffraction analysis, tensile testing analysis, and thermal gravimetric analysis. Characterization of these membranes depicted that carboxylic group functionalized MWCNTs are extremely compatible with CA. The permeation experiments were performed with NH₃ and N₂ to explore the host–guest interaction of MWCNTs with chosen gases. The permeability of NH₃ was found pronounced compared to N₂. The NH₃/N₂ selectivity up to 90 was documented.     

High-performance biological treatment of tuna wash processing wastewater using Yarrowia lipolytica

Environmental Science and Pollution Research - It is well known that the lack of an effective treatment of tuna wash processing wastewater may pose substantial environmental and public health...     

The effects of research and development and financial development on CO2 emissions: evidence from selected WAME economies

Environmental Science and Pollution Research - Earth is in the Anthropocene era and humankind deteriorates the global environment; thus, there is a dire need for sustainable policies at all levels....     

A pilot application of recycled discarded RO membranes for low strength gray water reclamation

Environmental Science and Pollution Research - Reuse of recycled RO membranes after oxidative treatment as ultrafiltration membranes promise to bring membrane filtration at par with conventional...     

Prophylactic effects of Cynara scolymus L. leaf and flower hydroethanolic extracts against diethylnitrosamine/acetylaminoflourene-induced lung cancer in Wistar rats

Environmental Science and Pollution Research - The study examines the prophylactic action of artichoke leaf hydroethanolic extract (ALE) and artichoke flower head hydroethanolic extract (AFE)...     

The role of natural resources,globalization, and renewable energy in testing the EKC hypothesis in MINT countries: new evidence from Method of Moments Quantile Regression approach

Environmental Science and Pollution Research - We employ the new Method of Moments Quantile Regression approach to expose the role of natural resources, renewable energy, and globalization in...