A pragmatic approach to study the groundwater quality suitability for domestic and agricultural usage,Saq aquifer,northwest of Saudi Arabia

The present study deals with detailed hydrochemical assessment of groundwater within the Saq aquifer. The Saq aquifer which extends through the NW part of Saudi Arabia is one of the major sources of groundwater supply. Groundwater samples were collected from about 295 groundwater wells and analyzed for various physico-chemical parameters such as electrical conductivity (EC), pH, temperature, total dissolved solids (TDS), Na⁺, K⁺, Ca²⁺, Mg²⁺, CO₃ ^?, HCO₃ ^?, Cl^?, SO₄ ^2?, and NO₃ ^?. Groundwater in the area is slightly alkaline and hard in nature. Electrical conductivity (EC) varies between 284 and 9,902?μS/cm with an average value of 1,599.4 μS/cm. The groundwater is highly mineralized with approximately 30 % of the samples having major ion concentrations above the WHO permissible limits. The NO₃ ^? concentration varies between 0.4 and 318.2 mg/l. The depth distribution of NO₃ ^? concentration shows higher concentration at shallow depths with a gradual decrease at deeper depths. As far as drinking water quality criteria are concerned, study shows that about 33 % of samples are unfit for use. A detailed assessment of groundwater quality in relation to agriculture use reveals that 21 % samples are unsuitable for irrigation. Using Piper’s classification, groundwater was classified into five different groups. Majority of the samples show Mix-Cl-SO₄- and Na-Cl-types water. The abundances of Ca²⁺ and Mg²⁺ over alkalis infer mixed type of groundwater facies and reverse exchange reactions. The groundwater has acquired unique chemical characteristics through prolonged rock-water interactions, percolation of irrigation return water, and reactions at vadose zone.     

Correction to: Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.     

Laboratory and field evaluation of real-time and near real-time PM2.5 smoke monitors

ABSTRACT

Increases in large wildfire frequency and intensity and a longer fire season in the western United States are resulting in a significant increase in air pollution, including concentrations of PM_2.5 (particulate matter <2.5 µm in aerodynamic diameter) that pose significant health risks to nearby communities. During wildfires, government agencies monitor PM_2.5 mass concentrations providing information and actions needed to protect affected communities; this requires continuously measuring instruments. This study assessed the performance of seven candidate instruments: (1) Met One Environmental beta attenuation monitor (EBAM), (2) Met One ES model 642 (ES642), (3) Grimm Environmental Dust Monitor 164 (EDM), (4) Thermo ADR 1500 (ADR), (5) TSI DRX model 8543 (DRX), (6) Dylos 1700 (Dylos), and (7) Purple Air II (PA-II) in comparison with a BAM 1020 (BAM) reference instrument. With the exception of the EBAM, all candidates use light scattering to determine PM_2.5 mass concentrations. Our comparison study included environmental chamber and field components, with two of each candidate instrument operating next to the reference instrument. The chamber component involved 6 days of comparisons for biomass combustion emissions. The field component involved operating all instruments in an air monitoring station for 39.5 days with hourly average relative humidity (RH) ranging from 19% to 98%. Goals were to assess instrument precision and accuracy and effects of RH, elemental carbon (EC), and organic carbon (OC) concentrations. All replicate candidate instruments showed high hourly correlations (R² ≥ 0.80) and higher daily average correlations (R² ≥ 0.90), where all instruments correlated well (R² ≥ 0.80) with the reference. The DRX and Purple Air overestimated PM_2.5 mass concentrations by a factor of ~two. Differences between candidates and reference were more pronounced at higher PM_2.5 concentrations. All optical instruments were affected by high RH and by the EC/OC ratio. Equations to convert candidate instruments data to FEM BAM type data are provided to enhance the usability of data from candidate instruments.

Implications: This study tested the performance of seven candidate PM_2.5 mass concentration measuring instruments in two settings - environmental chamber and field. The instruments were tested to determine their suitability for use during biomass combustion events and the effects of RH, PM mass concentrations, and concentrations of EC and OC on their performance. The accuracy and precision of each monitor and effect of RH, PM concentration, EC and OC concentrations are varied. The data show that most of these candidate instruments are suitable for measuring PM_2.5 concentration during biomass combustions with a proper correction factor for each instrument type.     

Determination of hierarchical relationships among sustainable development goals using interpretive structural modeling

This paper analyses the complex interactions among the seventeen sustainable development goals (SDGs) and presents them in a hierarchical framework using interpretive structural modeling technique. The driving and dependence powers of each of these goals have been ascertained to help the developing and least developed countries improve their strategic orientation for a particular goal within a given time frame. This would also help them in prioritizing their resource allocations on a specific SDG by focusing on its hierarchical ranking on one hand and driving and dependence powers on the other.     

Advanced microbial fuel cell for waste water treatment—a review

Environmental Science and Pollution Research - Petroleum, coal, and natural gas reservoir were depleting continuously due to an increase in industrialization, which enforced study to identify...     

Green synthesis,characterization, application and functionality of nitrogen-doped MgO/graphene nanocomposite

Environmental Science and Pollution Research - A facile, feasible, and green synthesis via an electrochemical exfoliation process was applied to synthesize nitrogen-doped MgO/graphene nanocomposite...     

Trace element contamination in the mine-affected stream sediments of Oued Rarai in north-western Tunisia: a river basin scale assessment

Environmental Geochemistry and Health - High-quality and accurate environmental investigations are essential for the evaluation of contamination and subsequent decision-making processes. A...     

Closely associated theropod trackways from the Jurassic of Zimbabwe

Eighty-eight tracks of large theropod dinosaurs were found in the mid-Jurassic of Zimbabwe. Among the tracks, at least five adjacent trackways are recorded. The adjacent tracks were probably made by animals traveling as a group, given that they are in relatively close succession; that there are three overlapping tracks (among just 23) suggesting reasonably close associations of the animals; that all the tracks are apparently of the same ichnotaxon; that the preservational types of the tracks are similar; and that the tracks are all of animals traveling in one general direction closely associated in time (there are no returning tracks of the same animals or of those of other species; presence of such tracks would be highly probable if the tracks were made over a period of time of even several hours). Nearby, recently discovered giant sauropod tracks, the first in sub-Saharan Africa, indicate a realistic potential of predator/prey interactions between the two groups of dinosaurs.