Environmental Science and Pollution Research - The outbreak of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has affected the entire world with its infectious spread and... 相似文献
The current study investigates on correlating the heavy metal contamination, its distribution, and the human health risk associated with all three components of an aquatic ecosystem. For this purpose, water, sediment, and fish samples (three species, notably Notopterus notopterus, Clarias batrachus, and Channa striata) from Deepor Beel were considered, and their heavy metal contamination and distribution were determined. The corresponding health risks were then evaluated for six different heavy metals; Cr, Cd, Fe, Mn, Cu, and Pb. Pb and Mn were found to significantly impact the non-carcinogenic human health risks for the water column. Simultaneously, Cd was considered to possess the highest potential for both carcinogenic and non-carcinogenic health effects in the sediment column. Cd also played a critical role in the fish samples' bioaccumulation factor, with the liver showing the maximum bioaccumulation potential. Furthermore, children were found to have considerably higher effects (both carcinogenic and non-carcinogenic) than adults. Finally, the sediment column was found to substantially contribute to the bioaccumulation factor in the fish biota, compared to the water column. The results of this investigation will thus prove consequential in designing, monitoring and restoring aquatic ecosystems.
In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip. 相似文献
This study reports the feasibility of using municipal wastewater biosolids as an alternative carbon source for biological phosphorus removal. The biosolids were treated by a lowtemperature, thermal alkaline hydrolysis process patented by Lystek International Inc.(Cambridge, ON, Canada) to produce short-chain volatile fatty acids and other readily biodegradable organics. Two sequencing batch reactors(SBRs) were operated with synthetic volatile fatty acids(Syn VFA) and readily biodegradable organics produced from the alkaline hydrolysis of municipal wastewater biosolids(Lystek) as the carbon source, respectively.Municipal wastewaters with different strengths and COD:N:P ratios were tested in the study. The reactors' performances were compared with respect to nitrogen and phosphorus removal. It was observed that phosphorus removal efficiencies were between 98%–99% and 90%–97% and nitrogen removal efficiencies were 78%–81%, and 67% for the Syn VFA and Lystek, respectively. However, the kinetics for phosphorus release and uptake during the anaerobic and aerobic stages with Lystek were observed to be significantly lower than Syn VFA due to the presence of higher order VFAs(C4 and above) and other fermentable organics in the Lystek. 相似文献
p-Aminodiphenylamine (p-ADPA) has got a binding capacity with tissue proteins. Aspartic and glutamic acids are presumably the responsible units in the protein chain involved in this binding with p-ADPA. p-ADPA is changed into a quinone structure after atmospheric oxidation in Krebs-Ringer-Bicarbonate buffer, pH 7.4 in the presence of trace metal ions. This oxidised form of p-ADPA binds with aspartic acid at pH 7.4 and temperature 40° in 2 hrs. The derivative thus formed absorbs at 450 nm instead of 430 nm. 相似文献
Environmental Chemistry Letters - Food wastage is a major concern for sustainable health and agriculture. To reduce food waste, classical preservation techniques such as drying, pasteurization,... 相似文献
Environmental Science and Pollution Research - Recent advancements and growing attention about free radicals (ROS) and redox signaling enable the scientific fraternity to consider their involvement... 相似文献
Environmental Science and Pollution Research - Clean water production using green energy supply plays a significant role in the globe’s health and economic development. In recent years, so... 相似文献
Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m3. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m3. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory. 相似文献