Flue gas desulfurization: the state of the art

Coal-fired electricity-generating plants may use SO2 scrubbers to meet the requirements of Phase II of the Acid Rain SO2 Reduction Program. Additionally, the use of scrubbers can result in reduction of Hg and other emissions from combustion sources. It is timely, therefore, to examine the current status of SO2 scrubbing technologies. This paper presents a comprehensive review of the state of the art in flue gas desulfurization (FGD) technologies for coal-fired boilers. Data on worldwide FGD applications reveal that wet FGD technologies, and specifically wet limestone FGD, have been predominantly selected over other FGD technologies. However, lime spray drying (LSD) is being used at the majority of the plants employing dry FGD technologies. Additional review of the U.S. FGD technology applications that began operation in 1991 through 1995 reveals that FGD processes of choice recently in the United States have been wet limestone FGD, magnesium-enhanced lime (MEL), and LSD. Further, of the wet limestone processes, limestone forced oxidation (LSFO) has been used most often in recent applications. The SO2 removal performance of scrubbers has been reviewed. Data reflect that most wet limestone and LSD installations appear to be capable of approximately 90% SO2 removal. Advanced, state-of-the-art wet scrubbers can provide SO2 removal in excess of 95%. Costs associated with state-of-the-art applications of LSFO, MEL, and LSD technologies have been analyzed with appropriate cost models. Analyses indicate that the capital cost of an LSD system is lower than those of same capacity LSFO and MEL systems, reflective of the relatively less complex hardware used in LSD. Analyses also reflect that, based on total annualized cost and SO2 removal requirements: (1) plants up to approximately 250 MWe in size and firing low- to medium-sulfur coals (i.e., coals with a sulfur content of 2% or lower) may use LSD; and (2) plants larger than 250 MWe and firing medium- to high-sulfur coals (i.e., coals with a sulfur content of 2% or higher) may use either LSFO or MEL.     

The United States Department of Energy's Regional Carbon Sequestration Partnerships Program Validation Phase

This paper reviews the Validation Phase (Phase II) of the Department of Energy's Regional Carbon Sequestration Partnerships initiative. In 2003, the U.S. Department of Energy created a nationwide network of seven Regional Carbon Sequestration Partnerships (RCSP) to help determine and implement the technology, infrastructure, and regulations most appropriate to promote carbon sequestration in different regions of the nation. The objectives of the Characterization Phase (Phase I) were to characterize the geologic and terrestrial opportunities for carbon sequestration; to identify CO(2) point sources within the territories of the individual partnerships; to assess the transportation infrastructure needed for future deployment; to evaluate CO(2) capture technologies for existing and future power plants; and to identify the most promising sequestration opportunities that would need to be validated through a series of field projects. The Characterization Phase was highly successful, with the following achievements: established a national network of companies and professionals working to support sequestration deployment; created regional and national carbon sequestration atlases for the United States and portions of Canada; evaluated available and developing technologies for the capture of CO(2) from point sources; developed an improved understanding of the permitting requirements that future sequestration activities will need to address as well as defined the gap in permitting requirements for large scale deployment of these technologies; created a raised awareness of, and support for, carbon sequestration as a greenhouse gas (GHG) mitigation option, both within industry and among the general public; identified the most promising carbon sequestration opportunities for future field tests; and established protocols for project implementation, accounting, and management. Economic evaluation was started and is continuing and will be a factor in project selection. During the Validation Phase, the seven regional partnerships will put the knowledge learned during the Characterization Phase into practice through field tests that will validate carbon sequestration technologies that are best suited to their respective regions of the country. These tests will verify technologies developed through DOE's core R&D effort and enable implementation of CO(2) sequestration on a large scale, should that become necessary. Pilot projects will have a site-specific focus to test technology; assess formation storage capacity and injectivity; validate and refine existing CO(2) formation models used to determine the transport and fate of CO(2) in the formation; demonstrate the integrity of geologic seals to contain CO(2); validate monitoring, mitigation, and verification (MMV) technologies; define project costs and compare costs of alternatives; assess potential operational and long-term storage risks; address regulatory requirements; and engage and evaluate public acceptance of sequestration technologies. Field validation tests involving both sequestration in geologic formations and terrestrial sequestration are being developed. The results from the Validation Phase will help to confirm the estimates made during the Characterization Phase and will be used to update the regional atlases and NatCarb. Answers to many questions about the effectiveness and safety of carbon sequestration technologies will be instrumental in planning for a Deployment Phase, in which large volume tests will be planned to further sequestration as an option that can mitigate GHG emissions in the United States.     

Learning,retention and coding of nest-associated visual cues by the Australian desert ant, <Emphasis Type="Italic">Melophorus bagoti</Emphasis>

A variety of social insects use visual cues for homing. In this study, we examine the possible factors affecting the learning and retention of nest-associated visual cues by the Australian desert ant Melophorus bagoti and the manner in which such cues are encoded by foraging ants. We placed four prominent cylindrical landmarks around a nest and trained foragers from that nest to a food source. Ants were tested with the landmark array in a distant testing field after (1) a known number of exposures to the landmarks (1, 3, 7 or 15 trials, spread over a period of 1 day, 2 days or ≥3 days) and (2) after a known period of delay (0, 24, 48, 96 or 192 h). The results show that a combination of an increase in training trials and an increase in number of training days affected the acquisition of landmark memory. Moreover, once the landmarks were learnt, they became a part of long-term memory and lasted throughout the ants’ foraging lifetime. To examine visual cue encoding behaviour, ants trained under similar conditions for 4 days were tested with (1) an identical landmark array, (2) landmarks of the same size used in training, but placed at twice the distance from each other, and (3) landmarks whose dimensions were doubled and placed at twice the distance from each other. In conditions (1) and (3), the ants searched extensively at the centre of the four landmarks, suggesting that, similar to the Saharan ant (genus Cataglyphis) and the honeybee, M. bagoti too uses a snapshot to match the view of the landmarks around the nest. But contrary to the snapshot model, in condition (2), the ants did not search extensively at the centre of the landmarks, but searched primarily 0.5 m from the landmark, the distance from each landmark to the nest during training. We discuss how various search models fare in accounting for these findings.     

Comparative Toxicological Evaluation of Untreated and Treated Tannery Effluent with Nostoc Muscorum L. (Algal Assay) and Microtox Bioassay

The relative sensitivity of tannery effluent before and after treatment was compared by employing Nostoc muscorum and microtox assay in laboratory. The effect on chlorophyll, protein and biomass content of Nostoc muscorum was studied with the luminescent property inhibition of Photobacterium phosphorium and compared with algal bioassay. The results of microtox assay after 5, 15 and 30 min of exposure were compared with data obtained from algal bioassay. It was observed that the luminescent property of Photobacterium phosphorium in microtox assay as well as the chlorophyll content of Nostoc muscorum in algal assay were the most sensitive parameters in toxicity evaluation of tannery effluent. The microtox assay produced notably comparable EC50 values with that of algal bioassay. The microtox assay of toxicity showed that EC50 (%) in 30 min was 3.19 and 63.49 for untreated and treated tannery effluent, respectively while in algal bioassay the EC50 for chlorophyll was in between 0-2.5% and 100%, respectively, in untreated and treated effluent. More than 60% reduction of toxicity was noted in treated tannery effluent in both test system.     

Monitoring of Organochlorine Pesticide Residues in Summer and Winter Vegetables from Agra, India – A case study

Analysis of summer and winter vegetable samples during 2002–2003 for pesticidal contamination was carried out on Gas Chromatograph-Electron Capture Detector with capillary columns. The contamination levels of winter vegetables (average concentration of 4.57, 6.80 and 5.47 ppb respectively for Lindane, Endosulphan and DDT) were found to be slightly higher than the summer vegetables (average concentration of 4.47, 3.14 and 2.82 ppb respectively for Lindane, Endosulphan and DDT). The concentration of these organochlorine pesticides in summer and winter vegetables were well below the established tolerances but continuous consumption of such vegetables even with moderate contamination level can accumulate in the receptor's body and may lead to chronic effects that could be fatal.     

Weather variability trends in Gangetic plains of Uttar Pradesh,India: influence on cropping systems and adaptation strategies

Environment, Development and Sustainability - Weather variability over the long run exhibits the trends of change in climate and forewarns for development and deployment of adaptation measures....     

A framework for assessing vulnerability of inland fisheries to impacts of climate variability in India

In recent years climate variability has threatened the sustainability of inland fisheries and dependent fishers in India. Systematic methodology to assess the vulnerability of the fisheries sector to climate variability is currently not available. Towards this end, the present work deals with the assessment of inland fisheries vulnerability to climate variations in 13 districts of West Bengal state in India. For this purpose, a composite vulnerability index (0.0–1.0) has been developed on the basis of functional relationships amongst sensitivity, exposure and adaptive capacity using 19 indicators related to inland fisheries. The data obtained reflected different spatial combinations of climate exposure, sensitivity and adaptive capacity among the districts. Five districts were highly vulnerable which was attributable to low adaptive capacity of the fishers which played an important role in altering the spatial pattern of vulnerability among the districts. Thus our research will provided an important basis for policy makers to develop appropriate adaptation strategies to minimize the risk of fisheries sector to climate variability.     

Evaluation of an organic soil amendment generated from municipal solid waste seeded with activated sewage sludge

This study investigated the feasibility of using fresh activated sewage sludge as inoculum for the microbial valorization of segregated municipal solid waste and evaluated the quality of organic soil amendment generated. Organic fraction of municipal solid waste, which consisted of vegetative (vegetable, fruit and flower) wastes was seeded with activated sewage sludge and processed by rapid aerobic microbial treatment. Efficacy of microbial valorization process and quality of final product were assessed by physico-chemical analysis. Suitability of final product was assessed with regard to heavy metal content, pesticide residues, microbiological quality and phytotoxicity. Quality of the soil amendment generated was compared with the control product generated with a commercial microbial inoculum. Phytotoxicity experiments indicated the stimulatory effect of sewage sludge seeded soil amendment on plant growth but inhibition was observed in closed growth test due to the evolution of gaseous phytotoxic agents. The study suggests that segregated municipal solid waste can be effectively valorized with activated non-dewatered sewage sludge as inoculum and the quality of soil amendment generated was comparable to compost intended for unrestricted applications.     

Nanocellulosic fiber-modified carbon paste electrode for ultra trace determination of Cd (II) and Pb (II) in aqueous solution

In recent years, increasing awareness of the environmental impact of heavy metals has prompted a demand for monitoring and decontaminating industrial wastes prior to discharging into natural water bodies. This paper describes the preparation and electrochemical application of carbon paste electrode modified with nanocellulosic fibers for the determination of cadmium and lead in water samples using anodic stripping voltammetry. First, cadmium and lead were adsorbed on the carbon paste electrode surface at open circuit potential, followed by anodic stripping voltammetric scan from -1 to 0 V. Different factors affecting sensitivity and precision of the electrode, including accumulating solvent, pH of the accumulating solvent, accumulation time, supporting electrolyte, and scan rate were investigated. The proposed method was also applied to the determination of Cd (II) and Pb (II) in the presence of other interfering metal ions and cetyl trimethyl ammonium bromide, sodium dodecyl sulfate, and Triton X-100 as a representative of cationic, anionic, and neutral surfactants. Linear calibration curves were obtained in the concentration ranges of 150–650 μg?L^?1 and 80–300 μg?L^?1, respectively, for cadmium and lead at an accumulated time of 10 min with limits of detection 88 and 33 μg?L^?1. Optimized working conditions are defined as acetate buffer of pH?5 as accumulating solvent, hydrochloric acid as supporting electrolyte, and scan rate 50 mV/s. This technique does not use mercury and therefore has a positive environmental benefit. The method is reasonably sensitive and selective and has been successfully applied to the determination of trace amounts of Cd (II) and Pb (II) in water samples.     

MHAC--an assessment tool for analysing manual material handling tasks.

This paper describes an assessment tool for analysing material handling tasks and its application for material handling tasks prevalent in engine bearing industry. After a close observation of material handling tasks spread over many days, a list of tasks and parameters/variables affecting those tasks was made. Ergonomic conditions present in these tasks and their deficiencies were then identified and on the basis of the relationships between the tasks and their affinities, categories were developed. Using the data of those categories and various conditions and parameters, an assessment tool called MHAC (material handling assessment chart) was developed.