Influence of aspect and location of stands on biodiversity in a Sal mixed broadleaved forest in Kumaun central Himalaya

In the present study total 21 forest stands on different aspects and locations (Hill base, mid slope and ridge top) on the slope were studied to assess the importance of these two parameters in supporting species regeneration and biodiversity in a mixed broadleaved forest between 380 and 850 m elevation in the Kumauau Himalayan region. A total of 36 tree species were recorded in the forest. In all aspects the tree, sapling and shrub richness was higher at hill base stands in comparison to mid slope and ridge top stand. Maximum tree richness (average across all aspects) was 9.7 and shrub richness was 9.3. Higher richness at hill base may be attributed to more soil moisture and deeper soils which accumulate the hill base where the slope steepness declines. The tree richness was higher in the northern aspect whereas southern aspect was more suitable for the shrub species. From the present study it becomes evident that the base of the hills can support higher biodiversity and are instrumental in supporting regeneration of several tree and shrub species in sal mixed broadleaved forest.     

Pilot-scale study of the effect of selective catalytic reduction catalyst on mercury speciation in Illinois and Powder River Basin coal combustion flue gases

A study was conducted to investigate the effect of selective catalytic reduction (SCR) catalyst on mercury (Hg) speciation in bituminous and subbituminous coal combustion flue gases. Three different Illinois Basin bituminous coals (from high to low sulfur [S] and chlorine [Cl]) and one Powder River Basin (PRB) subbituminous coal with very low S and very low Cl were tested in a pilot-scale combustor equipped with an SCR reactor for controlling nitrogen oxides (NOx) emissions. The SCR catalyst induced high oxidation of elemental Hg (Hg0), decreasing the percentage of Hg0 at the outlet of the SCR to values <12% for the three Illinois coal tests. The PRB coal test indicated a low oxidation of Hg0 by the SCR catalyst, with the percentage of Hg0 decreasing from approximately 96% at the inlet of the reactor to approximately 80% at the outlet. The low Cl content of the PRB coal and corresponding low level of available flue gas Cl species were believed to be responsible for low SCR Hg oxidation for this coal type. The test results indicated a strong effect of coal type on the extent of Hg oxidation.     

Chelation in metal intoxication XVI: Influence of chelating agents on chromate poisoned rats

The ability of selective polyaminocarboxylic acids and common drugs to reduce the body burden of chromium and restore Cr induced biochemical alterations in chromate intoxicated rats was investigated. 1,2 Cyclohexylene dinitrilotetraacetic acid (CDTA) and triethylenetetramine hexacetic acid (TTHA) were more effective than p-aminosalicylic acid (PAS) and isoniazid (INH) in enhancing urinary excretion of Cr, lowering hepatic and blood levels of Cr and restoring inhibited activity of hepatic aldolase. The chromate antidotal property of chelators seem to be related to the combination of nitrogen and oxygen as the electron donating centres.     

The mating system of Hanuman langurs: a problem in optimal foraging

Using data from 23 populations of Indian langurs (Presbytis entellus), we show that the proportion of one-male groups is a function of the males’ ability to defend groups of females, as predicted by the monopolisation model of Emlen and Oring (1977). However, we show that in addition to the number of females in the group and their reproductive synchrony, home range size is also a factor, probably because it affects a male’s willingness to search for other groups. These variables in turn are shown to be functions of environmental parameters (rainfall volume and seasonality, and mean ambient temperature) which probably act via the density of resources and refuges in habitats. Received: 3 March 1994 / Accepted after revision: 24 June 1996     

Nitrogen oxides emission control options for coal-fired electric utility boilers

Recent regulations have required reductions in emissions of nitrogen oxides (NOx) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NOx control technologies on coal-fired utility boilers. This paper reviews NOx control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NOx controls. The popular primary control technologies in use in the United States are low-NOx burners and overfire air. Data reflect that average NOx reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NOx control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NOx reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NOx emissions reflect that in 2003, these units achieved NOx emission rates between 0.04 and 0.07 lb/10(6) Btu.     

Emissions of sulfur trioxide from coal-fired power plants

Emissions of sulfur trioxide (SO3) are a key component of plume opacity and acid deposition. Consequently, these emissions need to be low enough to not cause opacity violations and acid deposition. Generally, a small fraction of sulfur (S) in coal is converted to SO3 in coal-fired combustion devices such as electric utility boilers. The emissions of SO3 from such a boiler depend on coal S content, combustion conditions, flue gas characteristics, and air pollution devices being used. It is well known that the catalyst used in the selective catalytic reduction (SCR) technology for nitrogen oxides control oxidizes a small fraction of sulfur dioxide in the flue gas to SO3. The extent of this oxidation depends on the catalyst formulation and SCR operating conditions. Gas-phase SO3 and sulfuric acid, on being quenched in plant equipment (e.g., air preheater and wet scrubber), result in fine acidic mist, which can cause increased plume opacity and undesirable emissions. Recently, such effects have been observed at plants firing high-S coal and equipped with SCR systems and wet scrubbers. This paper investigates the factors that affect acidic mist production in coal-fired electric utility boilers and discusses approaches for mitigating emission of this mist.     

Health risk assessment for toxic emissions from a manufacturing facility

This paper presents the risk associated with the release of toxic chemicals from a manufacturing facility, following the State of California's approach to risk assessment. The facility emits five toxic substances from eight stacks. The building downwash is considered during dispersion calculations. The zone of impact, identified using a risk criteria (i.e. excess cancer risk of 10 in a million), is located in the southeast quandrant from the plant. The size of the impact area is 3.3 km². The cancer and non-cancer effects are considered for chromium (VI), benzene, formaldehyde, gasoline vapors, methylene chloride, and selenium using the California Air Pollution Control Officers Association Guidelines. No significant non-cancer effects are found due to the emissions. The maximum calculated risk is 1.197×10^-5 and is an extremely conservative value. Analysis shows that the use of realistic assumptions for exposure duration and unit risk factors during the risk calculations could reduce the zone of impact to 0 km².     

Thiotepa - a potential chemosterilant for spotted boll worm Eariasfabia Stoll (Lepidoptera: Noctuidae) III — Effect on eggs

Thiotepa induced inhibition of nucleic acids, protein and free amino acids during early embryogenesis of $\text{E}$. $\text{fabia}$ is reported. Same level of inhibition was found in DNA, RNA and protein in different crosses. In T♂ X T♀ there was significant weight loss of the eggs also. The inhibition and weight loss has been attributed to the mitotic failure of the developing embryos due to genetic imbalance.     

Statistical evaluation of the influence of flow conditions and sampling techniques on water quality data.

The purpose of this study is to statistically evaluate the influence of various sampling methodologies and flow conditions on the quality and comparability of total phosphorus concentration data collected over the course of 27 months at the South Florida Water Management District (SFWMD) S-65E structure. The data was obtained from the following sampling methodologies: U.S. Geological Survey (USGS) (Reston, Virginia) equal width increment spatially composite grab samples, USGS replicate samples, SFWMD grab samples, and SFWMD autosampler samples. Both significant and insignificant differences were reported from these comparisons. Parametric and nonparametric standard statistical tests for significance were carried out to evaluate the differences between the data. To avoid invalid conclusions of insignificant differences, we conducted tests for equivalence of the means and variances. The results from the data analysis revealed that both flow conditions and sampling methodology affected the water quality data.     

Reactive solute transport in macroscopically homogeneous porous media: analytical solutions for the temporal moments

In this work, we investigate one-dimensional solute transport affected by rate-limited sorption, first-order mass transfer, and first-order transformation. Analytical expressions are obtained for the temporal moments of the solute in the solution phase. The effect of various rate coefficients on the temporal moments is examined. It was found that, in the presence of transformation reactions, the mean arrival time, and the spread and skewness of the breakthrough curves, are not monotonic functions of the rate coefficients. These solutions will be useful as a preliminary analysis tool for ascertaining the relative importance of various processes under given conditions. They may also be used to analyze the accuracy of various numerical techniques used for simulation of reactive transport.