Catalytic decomposition of polychlorinated biphenyls (PCBs)

In this study, polychlorinated biphenyls (PCBs) were decomposed by low‐temperature heat treatment with metallic catalyst, and with metallic catalyst and a hydrogen source. Of the catalysts used, iron (Fe) was the most active catalyst for the decomposition of PCBs, and the decomposition was due to dechlorination. The addition of hydrogen sources accelerated the decomposition of PCBs in the presence of catalyst. Surface analysis of the catalyst using X‐ray photoelectron spectroscopy (XPS) suggested that the emitted chlorine was presumed to form metal chloride. The reactions of each homolog can be expressed by a successive first‐order reaction model. This means that a substituted chlorine is successively detached during this reaction. The overall decomposition rate in this reaction system was controlled by that of the lower chlorinated homologs. The decomposition rates with Fe and NaBH₄ for the lower chlorinated homologs were about 10 times as fast as the rates with only Fe.     

New biofidelic corridor and biofidelity test procedure for pedestrian legform impactors

The objectives of this research are to propose a new impact response corridor for the ISO legform impactor and to determine the biofidelity of the current legform impactor with rigid leg and thigh developed by the Transport Research Laboratory (TRL). The latest data obtained from Post Mortem Human Subject (PMHS) knee impact tests were analyzed in connection with the proposal, and biofidelity legform impact tests were conducted using the current rigid legform impactor. New normalized biofidelic corridors of impact force corresponding to adult male 50th percentile (AM50) are proposed. The impact test results indicate the current rigid legform impactor does not have sufficient human knee biofidelity. The present results suggest that human tolerance can not be used directly for the injury reference value of the legform impactor. A conversion method is needed to interpret the data measured by current legform impactors as the injury reference value.     

Deterioration of Polyamideamine–Epichlorohydrin (PAE) in Aqueous Solutions During Storage: Structural Changes of PAE

Structural changes of polyamideamine–epichlorohydrin (PAE) in solution during storage at 4 °C and pH 4.2–4.5 for up to 8.9 years were studied by ¹H- and ¹³C-NMR analyses, colloidal titration and others. NMR signals due to 3-hydroxy-azetidinium groups of PAE decreased during storage, and correspondingly 2, 3-dihydroxypropyl groups were formed by the ring opening. The content of 3-hydroxy-azetidinium groups in PAE determined by ¹H-NMR were similar to that determined by the colloidal titration, although the former was higher than the latter. About 50% of the 3-hydroxy-azetidinium groups present in the fresh PAE were lost during storage for 8.9 years. Furthermore, ¹³C-NMR analysis revealed that significant depolymerization of polyamideamine chains occurred by hydrolysis of the amide linkages during storage. Rough evaluation of number average degree of polymerization (DPn) of the amideamine repeating unit showed that the DPn decreased from 12 to 2 during storage for 8.9 years.     

Oxygen Permeability and Biodegradability of Polyuronic Acids Prepared from Polysaccharides by TEMPO-Mediated Oxidation

Polyuronic acids, i.e., amylouronic acid, cellouronic acid and chitouronic acid, were prepared from starch, cellulose and chitin, respectively, by the 2,2,6,6-tetramethylpiperidine-1-oxy radical (TEMPO)-mediated oxidation, and their gas-barrier properties and biodegradability were studied in consideration to use the polyuronic acids as flexible packaging films or coating materials. Cellouronic acid and amylouronic acid had excellent oxygen-barrier properties similar to that of poly(vinyl alcohol) (PVA), while chitouronic acid did not. The regular chemical structures of the former two polyuronic acids with no bulky substituents or adducts may have brought about such high oxygen-barrier levels. An oxidized product prepared form fine microcrystalline cellulose by the TEMPO-mediated oxidation was not completely dissolved in water, but became a paste. However, this paste also formed sufficiently smooth films by coating, and had good gas-barrier property. All polyuronic acids prepared were biodegradable; cellouronic acid and chitouronic acid had high degrees of biodegradability, while amylouronic acid had quite low value. These various characteristics are significant for end use of these new polyuronic acids as gas-barrier materials for biodegradable packaging.     

Radon concentration in indoor occupational environments in Aomori Prefecture,Japan

The (222)Rn concentrations in indoor workplaces were measured in Aomori Prefecture, Japan, and the results are reported here. This survey was part of a program to measure background natural radiation dose rate in the prefecture where the first Japanese nuclear fuel cycling facilities are now under construction.The survey of the (222)Rn concentrations in indoor workplaces was carried out at 107 locations from 1996 to 1998. The (222)Rn concentrations were measured for approximately one year at each site with passive Rn detectors, which used a polycarbonate film for counting alpha-rays and could separate concentrations of (222)Rn from (220)Rn. Weeklong measurements of (222)Rn concentration and working level were carried out with active detectors to get the ratio of (222)Rn concentration during working hours to non-working hours as well as equilibrium factors in selected locations.Diurnal variation of (222)Rn concentration depended on building structure, air-conditioning, time of day and day of the week (week days or weekend). The (222)Rn concentration during working hours was generally lower than that in non-working hours. Although the annual average (222)Rn concentration in indoor occupational environments was higher than that in dwellings, radiation dose for Aomori Prefecture residents from Rn in the former was 14% of the total indoor dose by Rn because of the lower concentration in working hours and lower occupancy factor.     

Polybrominated diphenyl ethers and persistent organochlorines in Japanese human adipose tissues

The present study determined concentrations of polybrominated diphenyl ethers (PBDEs) and persistent organochlorines (OCs) in Japanese human adipose tissues collected during 2003–2004. Concentrations of PBDEs in adipose tissues were 1–2 orders of magnitude lower than those of OCs. However, observed PBDE congener levels in this study were relatively higher than those in Japanese human adipose tissues collected during 2000 reported previously, while OC levels were comparable to those in specimens collected during 1999 reported by our group. In addition, no age-dependent accumulation of PBDEs was observed, while OC levels except chlordane compounds increased with age. These results indicate recent human exposure to PBDEs in Japan. Among PBDE congeners accumulated in Japanese adipose tissues, BDE-153 was dominant, but this trend was different from those in human milk (BDE-47) and blood (BDE-209) reported previously in Japan, implying the congener-specific kinetics in human bodies. The significant positive correlations between PBDEs and OCs were observed in Japanese adipose tissues, indicating the similar exposure route of these contaminants for Japanese citizens, probably via fish intake.     

Japan’s greenhouse gas reduction scenarios toward net zero by 2050 in the material cycles and waste management sector

The first draft scenario toward net zero greenhouse gas (GHG) emissions by 2050 for the material cycles and waste management sector was presented by the Ministry of the Environment, Japan in August 2021. The details of the future GHG emission estimation used to create the draft scenario are described in this document. For multiple scenarios where more aggressive measures, such as carbon capture, utilization, and storage (CCUS), were included in addition to business-as-usual and the current policy continuity scenario, future GHG emissions were estimated as the sum of the products of activities and emission factors indicating changes in measures between scenarios. The estimation outcomes demonstrated that future GHG emissions from the solid waste management sector could be anticipated to be zero or even negative when material conversion to biomass, primarily for plastics, recycling to raw materials, and installation of CCUS at incineration facilities are assumed. Extensions of prior plans are not enough to reach the goal of net zero emissions, according to the measures necessary and the volume and pace of their implementation suggested in this study. Stakeholders should collaborate with great ambition.