Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

滇池底泥微生物菌群对微囊藻毒素的生物降解

采用滇池水华蓝藻中提取提纯的微囊藻毒素（microcystins，MCs）作为微生物生长的碳源和氮源，从长期暴露于蓝藻水华的滇池底泥中，通过从含低浓度到高浓度MCs的逐步培养驯化，获得了高效降解MCs的微生物混合菌群，在初始MC-RR和LR浓度大约分别为50mg／L和30mg／L下，3d内可将MCs全部降解。进一步活性研究显示，不同含碳和含氮化合物虽然能够促进混合微生物菌群的生长，但对降解MCs却无明显的促进作用，说明MCs既可以作为微生物生长的碳源，又可以作为微生物生长的氮源，在富含有机物的天然水体中并不一定能够促进微生物对MCs的生物降解。     

Preparation and certification of a reference material on PCBs in pig fat and its application in quality control in monitoring laboratories during the Belgian "PCB-crisis"

In this article, the production and validation of a new certified reference material "PCBs in animal fat" for the control of the maximum level of 200 ng/g setup by the European Communities for veterinary products from Belgium is described. Three materials are established: a blank, one material with about 100 ng/g and one with about 200 ng/g (sum of seven PCBs). Data on the production and certification are given. Additionally, this material was used as an unknown test material in the quality assurance program of the Belgium meat monitoring system (before the certification of the material). While the certification was performed with an uncertainty of less than 10%, the round robin exhibited larger deviations. However, these deviations were less than 20% for most of the 30 participating laboratories. Only two had significantly higher deviations.     

Ultrastructure of the gill of the hydrothermal-vent mytilid Bathymodiolus sp.

Specimens of Bathymodiolus sp. were collected at 2 620 m depth during the Biocyarise Cruise (12°5880N; 13°5660W) in March 1984, and samples of the gill were fixed for ultrastructural observations. The gill of this hydrothermal-vent mytilid constitutes the main organ in the nutritional processes. The lamellae display abundant ciliation, normally comprised of frontal cilia, compound latero-frontal cirri and lateral cilia. At the ventral margin of each demi-branch, a longitudinal, ciliated, feeding groove is present. the lamellae are composed of numerous homorhabdic filaments connected by tufts of cilia. Each filament is made of a thin wall overlying a central lumen containing amoebocytes. Ultrastructural observations revealed the filament wall to be composed of four types of cells: (1) The ciliated cells of the frontal, latero-frontal and lateral ciliation, characterized by an abundance of mitochondria. (2) Mucous cells present to some degree among the ciliated cells, but more abundant on the distal edge and containing dense droplets of mucus. (3) Cells colonized at their apical pole by numerous bacteria enclosed in membrane-delimited clear spaces and composing the major part of the filament wall. (4) Thin ciliated cells separating the bacterial cells and characterised by a dense fringe of microvilli at their apical pole. The lumen of the filament contains amoebocytes of different morphological aspects which seem to accumulate electron-dense granules, possibly related to detoxification processes.     

An examination of photosynthetic production,excretion of photosynthetic products,and heterotrophic utilization of dissolved organic compounds with reference to results from a coastal subtropical sea

The rate of primary production, excretion of photosynthetic products and turnover of glucose and amino acids was measured at a station in a coastal region in the Bahamas. Over the depths 0 to 50 m, total photosynthetic rates varied from 1.7 to 12.7 gC fixed 1^-1day^-1, averaging 4.3. The extent of extracellular photosynthetic products ranged from undetectable to 23%, averaging 6.9%. Neither the field data nor studies with axenic cultures of Dunaliella tertiolecta, Skeletonema costatum, and Monochrysis lutheri showed any evidence of an increase in the percentage excretion at low population densities or low photosynthetic rates. Rates of amino acid turnover varied from 21 to 168% day^-1, and that of glucose from 8.3 to 41% day^-1. Light seems to have little effect on the uptake and respiration of these substrates by the planktonic population. There was a significant relationship between the fraction of the substrate used for respiration and that retained by the cell. On average, 42% of the glucose taken up was respired and 21% of the amino acid mixture. Tentative calculations suggest that the production of dissolved organic material as extracellular photosynthetic products would be insufficient to supply the heterotrophic population, and it was concluded that some other route(s) must be of major importance.     

New observations of the gills of Placopecten magellanicus (Mollusca: Bivalvia), and implications for nutrition

The organization, general anatomy, and surface microanatomy of all regions of the gills of a representive bivalve mollusc, Placopecten magellanicus Gmelin, were studied using stereo-microscopic, histological, and scanning electron microscopic techniques. Individuals were collected in May and November 1985 from Chamcook Bay, New Brunswick, Canada. In addition to correcting earlier accounts of this structure, a number of new observations are reported. The orientation of the ciliated spurs appears to be responsible for the sinusoidal arrangement of the gill filaments. Micrographs showing the structure of the dorsal respiratory expansion are presented. The entire abfrontal surface of the principal filament, including the dorsal respiratory expansion, is densely ciliated and mucosecretory. These characteristics may aid in the establishment of a respiratory current and in the prevention of gill damage during escape responses. All nonciliated regions of the gill filaments are covered with microvilli, thus greatly increasing the surface area of the gill. The feeding mechanism is discussed in relation to the dorsal and ventral ciliated tracts. Symbiotic ciliate protozoans are constantly dislodged from the gill filaments and transported via the ventral mucus string to the buccal region. The nutritional implications of these observations are discussed.     

Influence of insect hormones on the establishment of dominance hierarchies among foundresses of the paper wasp,Polistes gallicus

Summary Laboratory studies on overwintered foundresses of Polistes gallicus show that differences in the endocrine activity are mainly responsible for achieving the dominance rank. Females that became dominant had either larger corpora allata or more developed ovaries than subordinate females. Body size did not contribute to dominance rank. Since a correlation exists between the length of terminal oocytes and the ecdysteroid titre in haemolymph as well as between the volume of corpora allata and the synthesis of juvenile hormone, dominant behaviour is thought to depend upon an elevated hormone titre in haemolymph. Injections of juvenile hormone (JHI) and 20-hydroxyecdysone, separately and simultaneously, significantly increased the probability that the treated female would be the dominant female of a test pair. After a hierarchy has been established, endocrine activity in subordinate foundresses is inhibited by the dominant foundress that then monopolizes reproduction.     

Prenatal diagnosis of a fetus with partial monosomy 7(q34→qter) and partial trisomy 18(q21→qter)

Ultrasound examination of a 31-year-old woman at 27 weeks' gestation revealed fetal growth retardation, a bilateral cleft lip and palate, and the absence of median cerebral structures. Chromosome analysis after cordocentesis showed an abnormal karyotype with a structural abnormality of the long arm of chromosome 7: 46,XX,—7,+der(7), t(7;18) (q34;q21.3)mat. The pregnancy was terminated at week 29. The ultrasound findings were confirmed by post-mortem examination, which also revealed a semilobar holoprosencephaly.     

Prenatal diagnosis of congenital my asthenia with arthrogryposis in a myasthenic mother

We studied two children born to a myasthenic mother. The first child, a female, had multiple flexion contractures. She died 1 h after birth. In the second pregnancy, 3 years later, ultra-sonographic examination at 20 weeks showed decreased fetal movements and multiple flexion contractures. The pregnancy was interrupted. Eight other cases of congenital rnyasthenia with arthrogryposis are known; four of them are siblings. The recurrence risk may be as high as 100 per cent. Our second case demonstrates that prenatal diagnosis is possible early enough to allow termination of pregnancy.     

城市地下交通联系隧道烟气控制探讨

为了给城市地下交通联系隧道(UTLT)防排烟系统设计和人员应急救援提供参考依据,以重庆某UTLT二期工程一段主隧道为例,开展全尺寸火灾试验,探讨了横向排烟方案的烟控效果,并验证了Alpert顶棚最高温升衰减模型。结果表明,UTLT主隧道段采用横向排烟方案,当防烟分区长度为120 m时,采用的排烟量设计方法是合理的。当隧道为上坡时,最有利的烟气控制模式为同时开启着火分区及下游相邻分区的排烟系统和与排烟分区紧邻的上、下游两个分区的补风系统。隧道顶部烟气最高温升衰减规律为:下游距火源无量纲距离r/H0.57及上游部分,呈指数衰减;下游距火源无量纲距离r/H0.57部分,呈幂函数衰减,且衰减程度与排烟方案有关。