CuO/γ-Al_2O_3负载型催化剂催化燃烧处理油烟

采用等体积漫渍法制备不同CuO负载量的CuO/γ-Al2O3负载型催化剂,用X射线衍射仪、扫描电镜对该催化剂负载层活性组分的表面形态、晶相结构和颗粒大小进行表征,考察了该催化荆催化燃烧处理油烟的催化活性(以油烟净化效率表征).结果显示,催化活性随CuO负载量的增加.反应温度的升高而提高,但随烟气流量的增大而降低;在CuO负载量为20%(质量分数)、反应温度为350℃.烟气流量为5 L/min的最佳实验条件下,CuO/γ-Al2O3负载型催化剂的油烟净化效率最高.可达88.6%.该催化剂对油烟的催化燃烧具有较高的催化活性.     

Fenton氧化法降解丙烯酸废水的研究

利用废铁屑与H₂O₂形成的Fenton氧化反应来降解工业丙烯酸废水中的丙烯酸。在间歇反应器中,系统地考察了反应时间、H2O2浓度、液固比(废水质量∶固体质量)和反应温度对丙烯酸的降解率的影响,优选了工艺条件。在连续固定床反应器中进行了对比实验,以考察固液接触状态的影响及系统的稳定性。结果表明,废铁屑与H₂O₂构成的Fenton体系能有效地降解废水中的丙烯酸。在间歇工况下,适宜的条件为,液固比40∶1,温度20～25℃,H₂O₂浓度800 mg/L ,反应时间35 min,在此条件下,丙烯酸的降解率可达到95%以上。对比实验表明,固液接触状态对降解效果的影响不大,铁屑的性能稳定,在连续93 h的稳定性实验中,丙烯酸的降解率保持在90%左右。     

Heterogeneous reactivity of pyrene and 1-nitropyrene with NO2: Kinetics,product yields and mechanism

The heterogeneous reactivity of nitrogen dioxide with pyrene and 1-nitropyrene (1NP) adsorbed on silica particles has been investigated using a fast-flow-tube in the absence of light. Reactants and products were extracted from particles using pressurised fluid extraction (PFE) and concentration measurements were performed using gas chromatography/mass spectrometry (GC/MS). The pseudo-first order rate constants were obtained from the fit of the experimental decay of particulate polycyclic compound concentrations versus reaction time. Experiments were performed at three different NO₂ concentrations and second order rate constants were calculated considering the oxidant concentration. The following rate constant values were obtained at room temperature: k(NO₂ + pyrene) = (9.3 ± 2.3) × 10^?17 cm³ molecule^?1 s^?1 and k(NO₂ + 1NP) = (6.2 ± 1.5) × 10^?18 cm³ molecule^?1 s^?1, showing that the reactivity of 1NP was slower by a factor of 15 than that of pyrene. 1NP was identified as the only NO₂-initiated oxidation product of pyrene and all the three dinitropyrenes were identified in the case of the 1NP reaction. The product quantification allowed showing that the kinetics of oxidation product formation was equal to that measured for parent compounds degradation, within uncertainties, confirming the validity of the reaction kinetics measurements.     

Heterogeneous reactions of ozone with pyrene, 1-hydroxypyrene and 1-nitropyrene adsorbed on particles

This work deals with the kinetic study of the reactions of ozone with pyrene, 1-hydroxypyrene and 1-nitropyrene, adsorbed on model particles. Experiments were performed at room temperature and atmospheric pressure, using a quasi-static flow reactor in the absence of light. Compounds were extracted from particles using pressurized fluid extraction (PFE) and concentration measurements were performed using gas chromatography/mass spectrometry (GC/MS). The pseudo-first order rate constants were obtained from the fit of the experimental decay of particulate polycyclic compound concentrations versus reaction time. Experiments were performed at three different O₃ concentrations from which second order rate constants were calculated. The following rate constant values were obtained at 293 K: k(O₃ + Pyrene) = (3.2 ± 0.7) × 10^?16 cm³ molecule^?1 s^?1; k(O₃ + 1OHP) = (7.7 ± 1.4) ×10 ^?16 cm³ molecule^?1 s^?1; and k(O₃ + 1NP) = (2.2 ± 0.5) × 10^?17 cm³ molecule^?1 s^?1, for pyrene, 1-hydroxypyrene and 1-nitropyrene adsorbed on silica particles. The variation in the rate constants demonstrates the strong influence of the substituent (OH or NO₂) on the heterogeneous reactivity of pyrene. The pyrene particulate concentration was also varied in order to check how this parameter may influence the experiments. Finally, oxidation products were investigated for all reactions and some were detected and identified for the first time for ozone heterogeneous reaction with pyrene adsorbed on particles.     

Spatial distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in soils from typical oil-sewage irrigation area, Northeast China

Air pollution is one of the major environmental problems in India, affecting health of thousands of 'urban' residents residing in mega cities. The need of the day is to evolve an 'effective' and 'efficient' air quality management plan (AQMP) encompassing the essential 'key players' and 'stakeholders.' This paper describes the formulation of an AQMP for mega cities like Delhi in India taking into account the aforementioned key 'inputs.' The AQMP formulation methodology is based on past studies of Longhurst et al., (Atmospheric Environment, 30, 3975-3985, 1996); Longhurst & Elsom, ((1997). Air Pollution-II, Vol. 2 (pp. 525-532)) and Beatti et al., (Atmospheric Environment, 35, 1479-1490, 2001). Further, the vulnerability analysis (VA) has been carried out to evaluate the stresses due to air pollution in the study area. The VA has given the vulnerability index (VI) of 'medium to high' and 'low' at urban roadways/intersections and residential areas, respectively.     

A phycocyanin probe as a tool for monitoring cyanobacteria in freshwater bodies

In many countries, the presence of cyanobacteria in freshwater bodies used for both drinking water and recreational purposes is under increasing public health attention. Water managers are considering how to implement monitoring that leads to a minimization of the risks incurred by the users of potentially contaminated sites. To address this question, this study involved assessing the performance of a submersible probe for measuring phycocyanin-specific fluorescence as a function of cyanobacterial biomass, with the aim of applying it as a tool for surveillance management. Its advantages and limits compared to more traditional analyses are discussed. The monitoring of cyanobacteria in the water bodies of western France was carried out using a minifluorimeter specific to the fluorescence of phycocyanin, a pigment specific to cyanobacteria. The results are compared with the analyses recommended by the World Health Organisation (chlorophyll a and cell counting). This study based on nearly 800 samples shows a significant correlation between the phycocyanin content and the cyanobacterial biomass, expressed as the number of cells per mL (R2 = 0.73). This submersible probe is simple and rapid to use, making it possible to take into account horizontal and vertical heterogeneities in the proliferation growth. In this way, we are able to detect at an early stage the conditions that could potentially lead to a risk, in order to start sampling. Due to its sensitivity, this tool proves suitable for monitoring aimed at reducing the risks incurred by the users of contaminated sites and launching preventative actions. The use of the phycocyanin probe provides an effective tool to complement traditional analyses of cyanobacterial presence. It is suggested that a surveillance protocol based on phycocyanin concentration can significantly improved the accuracy of the extent of cyanobacterial bloom development in the light of spatial and temporal variabilities associated with these occurrences.     

可燃气体(液体蒸气)爆炸测试装置的改进研究

以可燃气体(液体蒸气)爆炸测试装置改进为主线,综述国内外各种测试装置的优缺点。对不同装置、测试方法以及测试原理进行比较分析,研讨可燃气体爆炸的特点和爆炸参数测试方法以及对现有测试装置的改进方案。即对20 L爆炸测试装置的配气系统和控制系统进行了合理改进,使引射混合配气与循环混合配气相结合,使可燃气体(液体蒸气)与空气混合更均匀,控制操作更简便,还指出了今后研究工作中应注意的一些问题和研究重点。     

Trapping efficiencies of cultivated and natural riparian vegetation of northern Laos

In northern Laos, intensification of cultivation on sloping land leads to accelerated erosion processes. Management of riparian land may counteract the negative impacts of higher sediment delivery rates on water quality. This study assessed water and sediment concentration trapping efficiencies of riparian vegetation in northern Laos and the effect of cultivation of riparian land on water quality. Runoff flowing in and out of selected riparian sites was monitored by means of open troughs. In 2005, two native grass, two bamboo, and two banana sites were monitored. In 2006, adjacent to steep banana, bamboo, and native grass sites, three upland rice sites were established and monitored. Water trapping efficiency (WTE) and sediment concentration trapping efficiency (SCTE) were calculated on an event basis; means and 95% confidence intervals (CIs) were estimated with a bootstrapping approach. Confidence intervals were large and overlapping among sites. Seepage conditions severely limited trapping efficiency. Native grass resulted in the highest WTE (95% CI, -0.10 to 0.23), which was not significantly different from zero. Banana resulted in the highest SCTE (95% CI, 0.06-0.40). Bamboo had negative WTE and SCTE. Median outflow runoff from rice sites was nine times the inflow. Median outflow sediment concentration from rice sites was two to five times that of their adjacent sites and two to five times the inflow sediment concentration. Although low-tillage banana plantation may reduce sediment concentration of runoff, cultivation of annual crops in riparian land leads to delivery of turbid runoff into the stream, thus severely affecting stream water quality.     

Exposure assessment of French women and their newborns to tetrabromobisphenol-A: occurrence measurements in maternal adipose tissue, serum, breast milk and cord serum

A French monitoring study was initiated to evaluate the exposure of fetus and newborn to brominated flame retardants (BFR). A previously developed multi-residue analytical method was used for measuring the main classes of BFR (tetrabromobisphenol-A, and tri- to decabomodiphenyl ethers) in various human biological matrices. Analyzed samples (maternal and cord serum, adipose tissue and breast milk) were collected from 93 volunteer women during caesarean deliveries. TBBPA was detected in 44% of the analyzed breast milk samples, at levels varying from 0.06 to 37.34 ng g(-1) lipid weight, but was not detected in adipose tissue. This compound was also detected in 30% of the analyzed serum samples, with similar average values in maternal and cord serum (154 pg g(-1) fresh weight versus 199 pg g(-1) fresh weight, respectively). The interpretation of the collected data permitted the demonstration of (1) a significant exposure to TBBPA both for mothers and fetuses and (2) a possible risk of overexposure of newborns through breastfeeding.