Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.     

A GIS model-based screening of potential contamination of soil and water by pyrethroids in Europe

The paper presents a geographic information system (GIS) model-based approach for analysis of potential contamination of soil and water by pyrethroids for the European continent. Pyrethroids are widely used pesticides and their chemical and toxicological characteristics suggest there may be concerns about human health and ecosystems, although so far there is no strong evidence indicating actual risk. However, little monitoring has been conducted and limited experimental information is available. We perform an assessment exercise that demonstrates how accessible information and GIS-based modeling allow to estimate the spatial distribution of chemical concentrations and fluxes at a screening level. The assessment highlights potential hot spots and the main environmental transport pathways, in a quick and simple way. By combining information on pesticide use, crop distribution and landscape and climate parameters we identify potential problem areas to help focusing monitoring campaigns. The approach presented here is simple and fast, and can be applied to virtually all pesticide classes used over a large domain, and is therefore suitable for the screening of large quantities of chemicals, of which the majority has not undergone any systematic environmental monitoring program. The method has been tested through benchmarking with other well-established models. However, further research is needed to evaluate it against experimental observations.     

AnSBBR applied to the treatment of wastewater from a personal care industry: Effect of organic load and fill time

The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h⁻¹ at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable.     

Advanced rescue techniques: lessons learned from the collapse of a building in Nairobi, Kenya

This paper examines the collapse of a five-storey building in Nairobi, Kenya, on 23 January 2006. It draws on reports from local authorities and on debriefings by Israel's Home Front Command (HFC), including information on injury distribution, rescue techniques, and the mode of operation. Most of the 117 people found under the structure were evacuated on the first day to a public hospital, which was overwhelmed by the incident. HFC forces arrived 23 hours after the disaster. At that stage, two people were still buried under the building and special techniques (tunnelling and scalping) were required to secure their evacuation. The two people quickly recovered after a short stay in hospital. Local technology is the preferred option during such events because time is crucial. International cooperation is required when this technology is not available. All of the hospitals in the disaster area, including private facilities, should participate in treating casualties.     

Critical analysis of the waste management performance of two uranium production units in Brazil--part II: Caetite production center

This paper discusses the environmental waste management of the Heap-Leach Uranium Production Facility of Caetité located in a semi-arid region in Brazil. A comparison is made with the first uranium production site of the country located in Poços de Caldas. It is demonstrated that differences in the operational process along with different environmental conditions can lead to different impacts. In the present case groundwater is the potential most sensitive environmental medium despite the well-established consensus in the literature that radon and aerosol emissions may turn-out to be the most relevant environmental aspects of an installation located at this type of region. Most of the ²²⁶Ra content in the ore remains in the leached ore that is deposited with the waste rock. A lack in appropriate prediction of the hydrological balance has been causing unanticipated emissions of liquid effluents into the environment. Chemical treatment of this effluent may be needed. Contamination of groundwater in the short term by the waste ponds is not to be expected but it can be a relevant issue in the long term. As a consequence, careful closure schemes will need to be put in place. Finally, the overall costs with remediation in the Caetité production center are lower than those observed at the Poços de Caldas mining site.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Bioaccumulation of metals and effects of a landfill in small mammals. Part II. The wood mouse, Apodemus sylvaticus

We assess the bioaccumulation of metals (Pb, Hg, Cd, Fe, Mg, Zn, Cu, Mn, Mo, Cr) and effects of landfill leachates on morphological (RI, relative weights), plasma (GPT, GOT, creatinine), and genotoxic (MNT) parameters in wood mice, Apodemus sylvaticus, inhabiting close the Garraf landfill site (NE Spain). Due to the high age- and sex-dependent variation in wild populations, we also studied the effect of these biotic factors on the parameters studied. Wood mice from the landfill site, sited in a partially protected area, showed more Cd, Fe, Zn, Cu, Mn, Mo, and Cr than specimens from the reference site. Moreover, mice near the landfill registered low RI and high relative renal weight, GPT, and MN frequency, which indicate that the landfill affects the health of wild mice. In contrast to sympatric shrews from a previous study, wood mice showed lower bioaccumulation of metals and lower variation caused by biotic factors. Moreover, the morphological and physiological alterations demonstrated that they were also more sensitive at environmental pollution. Given the contribution of small mammals to ecosystem function and the scarce ecotoxicological data on the effects of landfill pollution on wild terrestrial mammals, we consider that our study can be used to improve the management of this protected area.     

Cephalopods and cetaceans as indicators of offshore bioavailability of cadmium off Central South Brazil Bight

Regarding Brazilian coast, industrial and urban developments are concentrated along Central South Brazil Bight. Samples from inshore and offshore species from the concerned area were analyzed, comprising 24 cetaceans (9 species) and 32 squids (2 species). Cadmium was determined by GFAAS and our results were in agreement with certified values (DOLT-2, NRCC). Mean cadmium concentration (in microg/g, wet weight) observed in the digestive gland of sexually mature Argentine short-finned squids (Illex argentinus) was 1002.9. To our knowledge this is the highest cadmium level ever reported for a cephalopod. Concerning cetaceans, our results include one of the highest renal cadmium concentrations described for striped dolphins (71.29 microg/g, wet weight). Anthropogenic action, upwelling and cannibalism of Argentine short-finned squid on the studied area are possible reasons for such remarkable cadmium concentrations.     

Electric load management in developing countries

Energy planners in developing countries have traditionally sought to meet their nations' growing electricity demands by adding more generation and transmission capacity. But as the foreign investment situation became critical in the 1980s, private investment and system efficiency improvement programmes began to garner interest. One of the most promising system efficiency improvement options is load management, which uses a variety of techniques to utilize the electricity system's existing capacity more efficiently. However, to date, only three countries have seriously considered implementing large load management programmes: Pakistan, Peru and Costa Rica. This paper describes a 1987-89 load control demonstration programme in Costa Rica, sponsored by the US Agency for International Development (AID), in which participating industries were able to reduce their peak demand by 14%.