Associating Ecosystem Service Losses with Indicators of Toxicity in Habitat Equivalency Analysis

Habitat equivalency analysis (HEA) was developed as a tool to scale mitigation or restoration when habitat is contaminated by hazardous substances or has been otherwise harmed by anthropogenic activities. Applying HEA involves balancing reductions in habitat quality against gains from restoration actions, and quantifying changes in habitat quality in terms of ecological services. We propose a framework for developing ecological service definitions and measures that incorporate knowledge about the impacts of chemical contaminants on biota. We describe a general model for integrating multiple lines of evidence about the toxicity of hazardous substances to allow mapping of toxicological inputs to ecological service losses. We provide an example of how this framework might be used in a HEA that quantifies ecological services provided by estuarine sediments contaminated with polycyclic aromatic hydrocarbons.     

The post-Bhopal and post-9/11 transformations in chemical emergency prevention and response policy in the United States

The United States' approach to incident prevention and response to hazardous chemical facilities has undergone two major transformations in the last 20 years. The first was triggered by the Bhopal tragedy in 1984, which led to major changes within the US chemical industry and a series of Federal laws and regulations intended to prevent major chemical accidents. A more recent transformation is currently underway in the wake of the 9/11 attacks on New York and Washington. It involves the advent of various security-related requirements affecting many of the same facilities covered under the existing accident prevention rules. This paper provides an overview of these transformations and their impacts.     

RAINGAGE NETWORK DESIGN USING NEXRAD PRECIPITATION ESTIMATES1

ABSTRACT: A general framework is proposed for using precipitation estimates from NEXRAD weather radars in raingage network design. NEXRAD precipitation products are used to represent space time rainfall fields, which can be sampled by hypothetical raingage networks. A stochastic model is used to simulate gage observations based on the areal average precipitation for radar grid cells. The stochastic model accounts for subgrid variability of precipitation within the cell and gage measurement errors. The approach is ideally suited to raingage network design in regions with strong climatic variations in rainfall where conventional methods are sometimes lacking. A case study example involving the estimation of areal average precipitation for catchments in the Catskill Mountains illustrates the approach. The case study shows how the simulation approach can be used to quantify the effects of gage density, basin size, spatial variation of precipitation, and gage measurement error, on network estimates of areal average precipitation. Although the quality of NEXRAD precipitation products imposes limitations on their use in network design, weather radars can provide valuable information for empirical assessment of rain‐gage network estimation errors. Still, the biggest challenge in quantifying estimation errors is understanding subgrid spatial variability. The results from the case study show that the spatial correlation of precipitation at subgrid scales (4 km and less) is difficult to quantify, especially for short sampling durations. Network estimation errors for hourly precipitation are extremely sensitive to the uncertainty in subgrid spatial variability, although for storm total accumulation, they are much less sensitive.     

ASSESSMENT USING GIS AND SEDIMENT ROUTING OF THE PROPOSED REMOVAL OF BALLVILLE DAM,SANDUSKY RIVER,OHIO1

ABSTRACT: The proposed removal of Ballville Dam was assessed by (1) using a new Geographic Information Systems (GIS) based method for calculating reservoir sediment storage, (2) evaluating sediment properties and contamination from core data, and (3) assessing downstream impacts from sediment routing calculations. A 1903 (pre‐dam) map was manipulated using GIS to recreate the reservoir bathymetry at time of dam construction and used in combination with a detailed 1993 bathymetric survey to calculate sediment volumes and thickness. Reservoir sediment properties and geochemistry were determined from 14 sediment vibracores. Annual sedimentation rates varied from 1.7 to 4.3 g/cm²/yr based on Cesium‐137 (¹³⁷Cs) and Lead‐210 (²¹⁰Pb) geochronology and dated flood layers. The pore fluid geochemistry (Ba, Co, Cu, Mn) of four cores showed surficial enrichments in Cu, while Co and Mn show secondary peaks within the sediments. GIS calculations showed that a designed channel through the former reservoir able to accommodate the 10 percent Probable Maximum Flood (PMF) would require removing approximately 0.35 million m³ of sediment (27 percent of the reservoir fill), either by dredging at a cost of up to $6.3 million or by releasing fine grained sediment downstream. A sediment routing model was applied for the critical 6 km downstream using four cross sections. The sediment routing model predicts that, for flows exceeding minimum Mean Daily Flow (1924 to 1998 data), greater than 90 percent of this sediment would be transported through downstream reaches into Lake Erie (Sandusky Bay).     

CULTURAL EVOLUTION AND WATER MANAGEMENT IN THE SALINAS RIVER VALLEY1

ABSTRACT: This article reports the findings of a case study of a major California water management district's effort to change its management approach. The following key findings and factors have influenced the Salinas basin management plan (BMP) and its progress: (1) the Salinas Valley is an economy dominated by highly sophisticated irrigated agriculture dependent on ground water; (2) a persistent pattern of agricultural overdraft of ground water has hurt growers primarily in the north end of the valley via induced saline intrusion of irrigation wells; (3) a complex set of water institutions, property and water rights, and land lease practices offer little incentive for good stewardship of land and water; and (4) the BMP approach initially may have intensified tension among growers and between growers and other water user groups. Water rules and practices in the Salinas Valley and Monterey County have evolved through a long historical process of adaptations. Therefore, any significant changes in local water use practices need to be understood in terms of cultural change, that is, changes in deeply held values, beliefs, and assumptions. We believe the BMP and the MCWRA are succeeding when evaluated from this evolutionary perspective. The fact that both still exist relatively intact testifies that they are working, albeit slowly.     

A practical approach to steam‐enhanced dual‐phase extraction: A case study

This article presents the results of a pilot test that was conducted to determine the effectiveness of using steam‐enhanced dual‐phase extraction (DPE) at a former industrial site in New York. The pilot test proved that steam‐enhanced DPE was very effective at removing significant contaminant mass from the subsurface in a relatively short time period. Concentrations of volatile organic compounds and semivolatile organic compounds in the vapor stream and groundwater were successfully reduced, in some cases by orders of magnitude. Based on the results of the steam‐enhanced DPE pilot test, the final remedy for the site includes implementing this technology at selected areas as an alternative to DPE alone or other remedial alternatives, such as excavation or groundwater pump and treat. © 2003 Wiley Periodicals, Inc.     

Re‐evaluation of treatment approach for a site contaminated with Freon‐113 and 1,1,1‐trichloroethane

This study demonstrates a remedial approach for completing the remediation of an aquifer contaminated with 1,1,2‐trichlorotrifluoroethane (Freon‐113) and 1,1,1‐trichloroethane (TCA). In 1987, approximately 13,000 pounds of Freon‐113 were spilled from a tank at an industrial facility located in the state of New York. The groundwater remediation program consisted of an extraction system coupled with airstripping followed by natural attenuation of residual contaminants. In the first phase, five recovery wells and an airstripping tower were operational from April 1993 to August 1999. During this time period over 10,000 pounds of CFC‐13 and 200 pounds of TCA were removed from the groundwater and the contaminant concentrations decreased by several orders of magnitude. However, the efficiency of the remediation system to recover residual Freon and/or TCA reduced significantly. This was evidenced by: (1) low levels (< 10 ppb) of Freon and TCA captured in the extraction wells and (2) a slight increase of Freon and/or TCA in off‐site monitoring wells. A detailed study was conducted to evaluate the alternative for the second‐phase remediation. Results of a two‐year groundwater monitoring program indicated the contaminant plume to be stable with no significant increase or decrease in contaminant concentrations. Monitored geochemical parameters suggest that biodegradation does not influence the fate and transport of these contaminants, but other mechanisms of natural attenuation (primarily sorption and dilution) appear to control the fate and transport of these contaminants. The contaminants appear to be bound to the soil matrix (silty and clay units) with limited desorption as indicated by the solid phase analyses of contaminant concentrations. Results of fate and transport modeling indicated that contaminant concentrations would not exceed the action levels in the wells that showed a slight increase in contaminant concentrations and in the downgradient wells (sentinel) during the modeled timeframe of 30 years. This feasibility study for natural attenuation led to the termination of the extraction system and a transaction of the property, resulting in a significant financial benefit for the original site owner. © 2003 Wiley Periodicals, Inc.     

WATERSHED OPTIMIZATION OF AGRICULTURAL BEST MANAGEMENT PRACTICES: CONTINUOUS SIMULATION VERSUS DESIGN STORMS1

ABSTRACT: Nonpoint source (NPS) models and expert opinions are often used to prescribe best management practices (BMPs) for controlling NPS pollution. An optimization algorithm (e.g., a genetic algorithm, or GA) linked with a NPS model (e.g., Annualized AGricultural Nonpoint Source pollution model, or AnnAGNPS), can be used to more objectively prescribe BMPs and to optimize NPS pollution control measures by maximizing pollutant reduction and net monetary return from a watershed. Pollutant loads from design storms and annual loads from a continuous simulation can both be used for optimizing BMP schemes. However, which strategy results in a better solution (in terms of providing water quality protection) for a watershed is not clear. The specific objective of the study was to determine the differences in watershed pollutant loads, in an experimental watershed in Pennsylvania, resulting from optimization analyses performed using pollutant loads from a series of five 2‐yr 24‐hr storm events, a series of five 5‐yr 24‐hr storm events, and cumulative pollutant loads from a continuous simulation of five years of weather data. For each of these three different event alternatives, 100 near optimal solutions (BMP schemes) were generated. Sediment (Sed), sediment nitrogen (SedN), dissolved N (SolN), sediment organic carbon (SedOC), and sediment phosphorus (SedP) loads from a different five‐year period (an evaluation period) suggest that the optimal BMP schemes resulting from the use of annual cumulative pollutant loads from a continuous simulation of five years of weather data provide smaller cumulative NPS pollutant loads at the watershed outlet.