In Situ solidification—A case study at a former manufactured gas plant in Macon,Georgia

In situ solidification (ISS) is a reliable, EPA‐recognized technology for the treatment of industrial and waste sites. ISS was employed at a former manufactured gas plant (MGP) site in Macon, Georgia, for the treatment of approximately 33,000 cubic yards of coal tar residues in the saturated zone soil. The site is regulated by the Georgia Environmental Protection Division (EPD) under the Hazardous Site Rehabilitation Act (HSRA) and is located approximately four blocks from downtown Macon. This article will review the technical and regulatory basis for the successful use of this technology, provide an overview of the treatability and pilot testing used to develop the design and implementation of the treatment process, and present the results of the application of ISS to an MGP site. The results of groundwater monitoring, pre and postremediation, will also be discussed. © 2004 Wiley Periodicals, Inc.     

Almost royal: incomplete suppression of host worker ovarian development by a social parasite wasp

Insect social parasites, like other parasites, may benefit from inhibiting their host from reproducing (complete or partial parasitic castration) because they can then exploit more of the host’s resources for their own reproduction. In particular, social parasites that kill or expel the host queen need to prevent host workers from reproducing; this is a common worker response to the absence of their queen. Indeed, host workers would benefit from detecting the presence of the parasite and investing in direct and indirect fitness. Studying whether and how social parasites control host worker reproduction can provide information about the degree of integration of the parasite in the host colony and help identify factors regulating workers’ reproductive decisions in social insects. We investigated whether the paper wasp social parasite, Polistes sulcifer, suppresses Polistes dominula (host) worker reproduction as efficiently as the dominant host female does in queen-right colonies by comparing worker reproductive efforts in parasitized and non-parasitized (control) colonies. Our results show that 6 weeks after usurpation of their colony by the social parasite, parasitized workers (1) had more developed ovaries than control workers and (2) laid more eggs as soon as the opportunity arose. This reproductive readiness of parasitized workers was not apparent 2 weeks after colony usurpation. This suggests that P. dominula workers have evolved means to react to social parasitism, as occurs in some ants, and that the parasite has only limited control over host reproduction.     

Stormwater treatment: examples of computational fluid dynamics modeling

Control of rainfall-runoff particulate matter (PM) and PM-bound chemical loads is challenging; in part due to the wide gradation of PM complex geometries of many unit operations and variable flow rates. Such challenges and the expense associated with resolving such challenges have led to the relatively common examination of a spectrum of unit operations and processes. This study applies the principles of computational fluid dynamics (CFD) to predict the particle and pollutant clarification behavior of these systems subject to dilute multiphase flows, typical of rainfall-runoff, within computationally reasonable limits, to a scientifically acceptable degree of accuracy. The Navier-Stokes (NS) system of nonlinear partial differential equations for multiphase hydrodynamics and separation of entrained particles are solved numerically over the unit operation control volume with the boundary and initial conditions defined and then solved numerically until the desired convergence criteria are met. Flow rates examined are scaled based on sizing of common unit operations such as hydrodynamic separators (HS), wet basins, or filters, and are examined from 1 to 100 percent of the system maximum hydraulic operating flow rate. A standard turbulence model is used to resolve flow, and a discrete phase model (DPM) is utilized to examine the particle clarification response. CFD results closely follow physical model results across the entire range of flow rates. Post-processing the CFD predictions provides an in-depth insight into the mechanistic behavior of unit operations by means of three dimensional (3-D) hydraulic profiles and particle trajectories. Results demonstrate the role of scour in the rapid degradation of unit operations that are not maintained. Comparisons are provided between measured and CFD modeled results and a mass balance error is identified. CFD is arguably the most powerful tool available for our profession since continuous simulation modeling.     

Modeling and forecasting daily maximum hourly ozone concentrations using the RegAR model with skewed and heavy-tailed innovations

This paper considers the modeling and forecasting of daily maximum hourly ozone concentrations in Laranjeiras, Serra, Brazil, through dynamic regression models. In order to take into account the natural skewness and heavy-tailness of the data, a linear regression model with autoregressive errors and innovations following a member of the family of scale mixture of skew-normal distributions was considered. Pollutants and meteorological variables were considered as predictors, along with some deterministic factors, namely week-days and seasons. The Oceanic Niño Index was also considered as a predictor. The estimated model was able to explain satisfactorily well the correlation structure of the ozone time series. An out-of-sample forecast study was also performed. The skew-normal and skew-t models displayed quite competitive point forecasts compared to the similar model with gaussian innovations. On the other hand, in terms of forecast intervals, the skewed models presented much better performance with more accurate prediction intervals. These findings were empirically corroborated by a forecast Monte Carlo experiment.     

Comparison of exergy found by a classical thermodynamic approach and by the use of the information stored in the genome

It is possible to calculate the exergy for organisms based on classic thermodynamics as already demonstrated by Mejer and Jorgensen [Mejer, H., Jorgensen, S.E., 1979. Exergy and ecological buffer capacity. State-of-the-art in Ecol. Model. 7, 829–846]. The calculation of exergy as eco-exergy, which is based on the information stored in the genome, has lately been proposed by Jørgensen and co-workers. Recently, Ludovisi [Ludovisi, A., 2009. Exergy vs information in ecological successions: interpreting community changes by a classical thermodynamic approach. Ecol. Model. 220, 1566–1577] has put forward a method based on classical thermodynamics, which leads to the calculation of “virtual” values of concentration at equilibrium for a number of organic compounds (VEC) and freshwater organisms (VECE). This paper compares the two approaches by analysing the correlation existing between the VECE- and the β-values derived by Jørgensen et al. [Jørgensen, S.E., Ladegaard, N., Debeljak, M., Marques, J.C., 2005. Calculations of exergy for organisms. Ecol. Model. 185, 165–175]. It was found that there was a good correlation, which can be useful for estimating β-values for organisms whose genome is not known in a sufficient detail. The relationship between VECE- and β-values suggests that two proposed thermodynamic orientors based on these quantities – the eco-exergy index and the structural information – should lead to coherent results when applied to the evaluation of the development state of ecosystems. A numerical simulation shows that this expectation is verified in a major case, but also that different, even opposite, responses can arise, depending on the biological composition of the biocoenosis investigated.     

Larval ecology of the great barracuda, <Emphasis Type=Italic>Sphyraena barracuda</Emphasis>, and other sphyraenids in the Straits of Florida

The great barracuda (Sphyraena barracuda) is a widespread, ecologically and socioeconomically important coastal fish, yet very little is known about its larvae. We examined spawning and larval ecology of Western Atlantic sphyraenids using monthly ichthyoplankton samples collected over 2 years along a transect spanning the east–west axis of the Straits of Florida (SOF). Samples were dominated by the great barracuda (92.8%) and sennets (Sphyraena borealis and Sphyraena picudilla; 6.6%). While larval sennets and S. barracuda displayed similar vertical distributions (majority in upper 25 m), horizontal and temporal patterns of abundance suggested a spatial and temporal species replacement between larval S. barracuda and sennets that tracks adult ecology. The diet of both taxa consisted largely of copepods, with inclusion of fish larvae at 8 mm SL, and in S. barracuda alone, a switch in the wet season to exclusive piscivory by 12 mm SL (18 days post-hatch). A lack of piscivory in S. barracuda larvae captured in the dry season corresponded to slower larval growth than in the wet season. Larval growth was also related to size-at-hatch and larval age such that larvae that were larger at hatch or larger (older) at capture grew faster at earlier ages, suggesting faster larval growth, and indirectly larger hatch size, conveys a survival advantage. Unlike larval growth, instantaneous mortality rate did not differ with season, and no lunar cyclic patterns in spawning output were identified. Our results provide insight into the pelagic phase of sphyraenids and highlight the importance of both diet and hatch size to the growth and survival of fish larvae in low latitude oceanic environments.     

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment (WEEE) was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash (FA) is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment (fly ash after mechanical and acid activation, FAMA) and suppressed almost entirely down to let fly ash become completely amorphous (fly ash after mechanical and basic activation FAMB). Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400°C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield: from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased: from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Open image in new window