A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

The demand for precision surgical knives is enormous. Currently, diamond knives have been the preferred choice among surgeons for use in precision surgeries, owing to the extreme hardness of diamond and the sharpness that can be achieved in single crystal diamond blades, but material and processing costs are high. Bulk metallic glass (BMG) has the potential to be an economically viable material of similar performance for use in precision surgical knives. To this end, a novel hybrid manufacturing process integrating thermally assisted micro-molding and micro-drawing has been developed for producing BMG surgical-grade knife blade cutting edges with edge radii <50 nm. A hybrid process testbed was designed and used to successfully run tests over a range of the key process variables. Through this testing the deformation of BMG under different strain rates and temperatures was studied in terms of the quality of edge formation. The hybrid process was shown to be capable of producing cutting edges of radius at or below 100 nm.     

The effects of surfactant formulation on nonequilibrium NAPL solubilization

Surfactant-enhanced aquifer remediation (SEAR) involves the injection of surfactant solutions into aquifers contaminated with nonaqueous phase liquids (NAPL). Batch and column experiments were used to assess the effect of surfactant formulation on the rate of NAPL solubilization. The experimental variables were surfactant type, surfactant concentration, electrolyte concentration, and cosolvent concentration. Model equations were proposed and solved to describe solubilization under the conditions of each type of experiment. Using these models, a solubilization rate constant, kappa(b), and an overall mass transfer rate coefficient, kappa, were estimated from the batch and column experiments, respectively. The solubilization rate constant was consistently sensitive to surfactant type, surfactant concentration, and electrolyte concentration. The estimated solubilization rate constants varied over two orders of magnitude. The results of the column experiments also were sensitive to the surfactant formulation. Variations in the fitted mass transfer rate coefficient parameter, beta(0), were related to variations in the surfactant formulations. A comparison between the results of the batch and column experiments yields an apparent relationship between beta(0) and kappa(b). This relationship suggests that the mass transfer rate coefficient is directly related to the formulation of the surfactant solution.     

Accounting for Cadmium: Tracking Emissions of Cadmium From the Global Economy

This paper examines the flow of cadmium through the global economy, with the aim of quantifying emissions of cadmium into the environment as a result of anthropogenic activities. First, a materials balance methodology is presented as the most appropriate means of assessing cadmium emissions from a wide range of anthropogenic sources. This is then applied to the best available data, from a variety of sources, to arrive at estimated flows of cadmium. Results are presented for 10 geo-political world regions and for a range of economic activities including non-ferrous metals production, iron and steel production, combustion of fossil fuels, fertilizer manufacture and use, cement production and the manufacture, use and disposal of cadmium containing products. Initially, this analysis partitions the total flow of cadmium into three major categories: atmospheric emissions, water-borne effluents and solid or bulked waste arisings. the paper then suggests a probable further partition of the initial emissions into different environmental media.     

An approach to simulate wind fields around an urban environment for wind energy application

This work proposes an approach to simulate wind flow fields around an urban environment with the aim of evaluating the potential impact of buildings on the general wind patterns and power production using the current generation of commercial wind turbines. The simulation process was performed with the aid of accessible computational tools that can potentially render the proposed procedure applicable in other cases of interest. The roughness of the urban environment was defined as the association of roughness map, topography, and an alternative process for obtaining the volumetry of buildings. A case study was conducted in a region located at the district of Boa Viagem (Recife-PE) for assessing the applicability of the approach. Scenarios were designed in order to simulate wind flow patterns and pre-identify sites that have suitable wind energy potential for electric power production by investigating the combination of wind speed magnitude and turbulence intensity. From the results obtained, it was possible to identify zones of potential wind sources that are not detected in classical wind atlas probably due to the influence of the built environment on local wind flow patterns.     

Seasonal changes in movements and habitat preferences of the scalloped hammerhead shark (Sphyrna lewini) while refuging near an oceanic island

Movements and habitat preferences of sharks relative to a central location are widely documented for many species; however, the reasons for such behaviors are currently unknown. Do movements vary spatially or temporally or between individuals? Do sharks have seasonal habitat and environmental preferences or simply perform movements at random at any time of the year? To help understand requirements for the designation of critical habitats for an endangered top predator and to develop zoning and management plans for key habitats, we examined vertical and horizontal movements, and determined habitat and environmental preferences of scalloped hammerhead sharks (Sphyrna lewini). We tracked seven hammerheads for 19–96 h at Wolf Island (1.38ºN, 91.82ºW) between 2007 and 2009 using ultrasonic transmitters with depth and temperature sensors, and we profiled temperature through the water column. Movements of individual hammerheads fell in two classes: constrained (remaining near the island) and dispersive (moving offshore to pelagic environments). The central activity space or kernel off the southeast side of Wolf Island was small and common to most, but the area varied among individuals (mean ± SE 0.25 ± 0.2 km²), not exceeding 0.6 km² for any of the sharks, and not changing significantly between seasons. In general, hammerheads showed preference for the up-current habitat on the eastern side of Wolf Island in both the warm and cold seasons. However, the depth of sharks varied with season, apparently in response to seasonal changes in the vertical structure of temperature. Hammerheads performed frequent vertical excursions above the thermocline during offshore movements and, in general, were observed to prefer temperatures of 23–26 °C found above the thermocline. At times, though individuals moved into the thermocline and made brief dives below it. Our results provided evidence that hammerheads (1) are highly selective of location (i.e., habitat on up-current side of island) and depth (i.e., top of the thermocline) while refuging, where they may carry out essential activities such as cleaning and thermoregulation, and (2) perform exploratory vertical movements by diving the width of the mixed layer and occasionally diving below the thermocline while moving offshore, most likely for foraging.     

Fine-scale distribution of juvenile Atlantic and Mediterranean loggerhead turtles (Caretta caretta) in the Mediterranean Sea

Loggerhead turtles nesting in the Mediterranean Sea exhibit remarkable genetic structuring. This paper tests the hypothesis that young loggerhead turtles from different rookeries do not distribute homogeneously among the major Mediterranean foraging grounds, due to a complex pattern of surface currents. We extracted long fragments of mitochondrial DNA from 275 stranded or bycaught juvenile turtles from six foraging grounds (Catalano-Balearic Sea, Algerian basin, Tyrrhenian Sea, Adriatic Sea, northern Ionian Sea and southern Levantine Sea). We used a Bayesian mixed-stock analysis to estimate the contributions from rookeries in the Mediterranean, the North-west Atlantic and Cape Verde to the studied foraging grounds. Differences were found in the relative contribution of juvenile turtles of Atlantic and Mediterranean origin to each foraging ground. A decreasing proportion of Atlantic juveniles was detected along the main surface current entering the Mediterranean, with a high prevalence of turtles from eastern Florida in the Algerian basin and lower numbers elsewhere. In regard to the turtles of Mediterranean origin, juveniles from Libya prevailed in central and western Mediterranean foraging grounds other than the Algerian basin. Conversely, the Adriatic Sea was characterised by a large presence of individuals from western Greece, while the southern Levantine Sea was inhabited by a heterogeneous mix of turtles from the eastern Mediterranean rookeries (Turkey, Lebanon and Israel). Overall, the distribution of juveniles may be related to surface circulation patterns in the Mediterranean and suggests that fisheries might have differential effects on each population depending on the overlap degree between foraging and fishing grounds.     

Effects of three biochars on copper immobilization and soil microbial communities in a metal-contaminated soil using a metallophyte and two agricultural plants

Environmental Geochemistry and Health - Biochar (BC) is a porous, carbonaceous material produced by slow pyrolysis of biomass under oxygen-limited conditions. BC production has been attracting...     

Mapping cumulative impacts of mining on sediment retention ecosystem service in an Australian mining region

Mining development can potentially lead to cumulative impacts on ecosystems and their services across a range of scales. Site-specific environmental impact assessments are commonly assessed for mining projects; however, large-scale cumulative impacts of multiple mines that aggregate and interact in resources regions have had little attention in the literature and there are few examples where regional-scale mining impacts have been assessed on ecosystem services. The objective of this study is to quantify regional-scale cumulative impacts of mining on sediment retention ecosystem services. We apply the sediment delivery ratio model of Integrated Valuation of Ecosystem Services and Trade-offs to calculate and map the sediment retention and export using a synthetic catchment model and a real case study under different mining scenarios in an Australian mining region. Two impact indices were created to quantify the cumulative impacts associated with a single mine and the interactions between multiple mines. The indices clarified the magnitude of impacts and the positive/negative impacts associated with regional-scale sediment retention and export. We found cumulative impacts associated with multiple mines’ interaction occurred but the influence of these interactions was relatively weak. This research demonstrated the potential for utilising ecosystem services modelling for the quantitative assessment of the cumulative impacts. Such research provide decision-makers and planners with a tool for sustainable regional and landscape planning that balances the needs of mining and the provision of ecosystem services.     

Hotspots within hotspots? Hammerhead shark movements around Wolf Island, Galapagos Marine Reserve

Are pelagic species such as sharks and tuna distributed homogenously or heterogeneously in the oceans? Large assemblages of these species have been observed at seamounts and offshore islands in the eastern tropical Pacific, which are considered hotspots of pelagic biodiversity. Is the species distribution uniform at these hotspots or do species aggregate at a finer spatial scale at these sites? We employed three techniques to demonstrate that the aggregations of scalloped hammerhead sharks, Sphyrna lewini, and other pelagic species were confined to the southeastern corner of Wolf Island in the Galapagos Marine Reserve. Coded ultrasonic transmitters were placed on individuals at this site and at another aggregation site at Darwin Island, separated from Wolf by 40 km, and they were detected by monitors moored at the southeastern corner of Wolf Island and rarely by monitors deployed at other sites around the island. Hammerhead sharks, carrying depth-sensing continual transmitters, were tracked for two-day periods in a vessel and shown to reside a disproportionately large fraction of their time at the southeastern corner. Visual censuses were carried out seasonally at the eight monitor sites at Wolf Island, recording the abundance of one species of tuna, four species of jacks, and a number of other species. The highest diversity and abundance of these species occurred in the southeastern corner of the island. Our results support the use of hammerhead sharks as indicator and umbrella species for pelagic hotspots on a fine scale.