Heavy metal content and speciation in groundwater of the Guadiamar river basin

This work presents the conclusions of a speciation study concerning Zn, Cd, Pb and Cu in groundwater from ten wells in the alluvial aquifers of the Guadiamar river, affected by Aznalcollar mine tailing spill (April 1998). The sampling campaign took place in January 2000, almost two years after the mining accident. Four metal fractions were determined: labile metal forms, H+ exchangeable metal forms, strongly inert forms (associated with organic and inorganic matter in solution), and forms associated with suspended matter. Total metal concentration in groundwater followed the trend Cd < Pb < Cu < Zn. The speciation study showed that Zn and Cd were present to a great extent in available forms (labile and H+ exchangeable), while Pb and Cu were found mostly in the less available forms (strongly inert). These results can illustrate the potential value of the speciation tool for the follow-up of spill-induced pollution in the area.     

Comparison of the substrate effect on voc emissions from water based varnish and latex paint

BACKGROUND, AIMS AND SCOPE: The building materials are recognised to be major contributors to indoor air contamination by volatile organic compounds (VOCs). The improvement of the quality of the environment within buildings is a topic of increasing research and public interest. Legislation in preparation by the European Commission may induce, in the near future, European Union Member States to solicit the industries of paints, varnishes and flooring materials for taking measures, in order to reduce the VOC emissions resulting from the use of their products. Therefore, product characterisation and information about the influence of environmental parameters on the VOC emissions are fundamental for providing the basic scientific information required to allow architects, engineers, builders, and building owners to provide a healthy environment for building occupants. On the other hand, the producers of coating building materials require this information to introduce technological alterations, when necessary, in order to improve the ecological quality of their products, and to make them more competitive. Studies of VOC emissions from wet materials, like paints and varnishes, have usually been conducted after applying the material on inert substrates, due to its non-adsorption and non-porosity properties. However, in real indoor environments, these materials are applied on substrates of a different nature. One aim of this work was to study, for the first time, the VOC emissions from a latex paint applied on concrete. The influence of the substrate (uncoated cork parquet, eucalyptus parquet without finishing and pine parquet with finishing) on the emissions of VOC from a water-based varnish was also studied. For comparison purposes, polyester film (an inert substrate) was used for both wet materials. METHODS: The specific emission rates of the major VOCs were monitored for the first 72 h of material exposure in the atmosphere of a standardized test chamber. The air samples were collected on Tenax TA and analysed using thermal desorption online with gas chromatography provided with both mass selective detection and flame ionisation detection. A double exponential model was applied to the VOC concentrations as a function of time to facilitate the interpretation of the results. RESULTS AND DISCUSSION: The varnish, which was introduced in the test chamber 23 h after the application of the last layer of material, emitted mainly glycolethers. Only primary VOCs were emitted, but their concentrations varied markedly with the nature of the substrate. The higher VOC concentrations were observed for the parquets of cork and eucalyptus, which indicated that they have a much higher porosity and, therefore, a higher power of VOC adsorption than the finished pine parquet (and polyester film). The paint was introduced in the chamber just after its application. Only primary VOCs were emitted (esters, phthalates, glycolethers and white spirit) but some compounds, like 2-(2-butoxyethoxy)ethanol and diethylphthalate, were only observed for paint/polyester, which suggested that they were irreversibly adsorbed by the paint/concrete. Compared with the inert substrate, the rate of VOC emissions was lower for concrete in the wet-stage (first hours after the paint application) but slightly higher later (dry-stage) as a consequence of desorption. CONCLUSIONS: As to varnish, the substrates without finishing, like cork and eucalyptus parquets, displayed a higher power of adsorption of VOCs than the pine parquet with finishing, probably because they have a higher porosity. As concerns paint, the total masses of VOCs emitted were lower for concrete than for polyester, indicating that concrete reduces the global VOC emissions from the latex paint. Concrete is seen to have a strong power of adsorption of VOCs. Some compounds, namely 2-(2-butoxyethoxy)ethanol, diethylphthalate and TEXANOL (this partially), were either irreversibly adsorbed by the concrete or desorbed very slowly (at undetected levels). A similar behaviour had not been reported for gypsum board, a paint substrate studied before. RECOMMENDATIONS AND OUTLOOK: The present data suggest that concrete may be a recommendable substrate for paint in an indoor environment. As the nature of the substrate conditions the rate and nature of VOC emissions from wet materials, it must be explicit when emissions from composite materials are reported, in order to allow comparisons and labelling of the product in terms of indoor air quality.     

Evaluating the impact of extreme temperature based indices in the 2003 heatwave excessive mortality in Portugal

This paper analyses the impact of the 2003 European heatwave on excessive human mortality in Portugal, a country that presents a relatively high level of exposure to heatwave events. A total of 2399 excessive deaths are estimated in continental Portugal, which implies an increase of 58% over the expected deaths. When these values are split by gender, it is seen that women increase (79%), was considerably higher than that recorded for men (41%). The increment of mortality due to this heatwave was detected for all the 18 districts of the country, but its magnitude was significantly higher in the inner districts close to the Spanish border. When we split by gender all districts reveal significant mortality increments for women, while the impact in men's excess deaths is not significant over 3 districts. Several temperature derived indices were used and evaluated in their capacity to explain, at the regional level, the excessive mortality (ratio between observed and expected deaths) by gender. It is shown that the best relationship is found for the total exceedance of extreme days, an index combining the length of the heatwave and its intensity. Both variables hold a linear relationship with r = 0.79 for women and a poorer adjustment (r = 0.50) for men. Additionally, availability of mortality data split by age also allowed obtaining detailed information on the structure of the population in risk, namely by showing that statistically significant increments are concentrated in the last three age classes (45–64, 65–74 and 75 or more). The use of air conditioning systems in some Portuguese hospitals had a major impact on the decrease (up to 40%) in excessive mortality values. A finer approach is relevant for prevention strategies, since it allows to identify better the target population of any preventive strategy regional and national authorities may be interested to implement.     

Mantle-to-shell CaCO<Subscript>3</Subscript> transfer during shell repair at different hydrostatic pressures in the deep-sea vent mussel <Emphasis Type="Italic">Bathymodiolus azoricus</Emphasis> (Bivalvia: Mytilidae)

Calcium carbonate transfer was experimentally examined in hydrothermal mussels Bathymodiolus azoricus, which were collected from 850 m depth at Menez Gwen hydrothermal vent site (31°31′W, 37°50′N) on the Mid Atlantic Ridge in May 2007. In each of four 10-day experiments, groups of mussels were maintained at atmospheric pressure or re-pressurised to depths relevant to their site of occurrence, i.e. 850 m depth at Menez Gwen, 1,750 m at Lucky Strike (31°31′W, 37°18′N) and 2,300 m at Rainbow (31°31′W, 36°13′N). The shells of experimental mussels were perforated and mantle tissue was fixed for light and TEM studies at days 7 and 10 following the injury. Simultaneously, haemocytes from the extrapallial fluid (EPF) at the site of induction were studied. At day 7 the response was most intense in the middle fold of the mantle margin and possibly proportional to hydrostatic pressure. At day 10 the epithelial cells on the mantle surface facing the body cavity produced copious organic secretions that avidly bound calcium. Haemocyte migration was noted within the mantle tissue, and the haemocytes at the mantle surface facing the shell had a Ca-positive granular content. Large haemocytes were detected in the EPF at the injury site, and some showed evidence of an immune reaction while others showed Ca-positive granular content. These results suggest that haemocytes are involved in shell repair in these deep-sea mussels just as in some freshwater and shallow marine molluscs.     

Analysis of energy security and sustainability in future low carbon scenarios for Brazil

This study estimated a series of indicators to assess the energy security of supply and global and local environmental impacts under different mitigation scenarios through 2050 in Brazil, designed with the integrated optimization energy system model MESSAGE‐BRAZIL. The assessment of interactions between environmental impacts and energy security dimensions was complemented through the application of life cycle assessment (LCA) methodology. Overall results imply energy security establishes more synergies than trade‐offs in increasingly stringent mitigation scenarios, especially patent within the sustainability dimension, which increases energy security and provides additional benefits regarding climate change mitigation and air pollution emissions. It is still necessary to extend analysis to other energy sectors in addition to the power supply sector and to promote a better understanding of repercussions of energy scenario expansion in energy security.     

Environmental management in Brazil: is it a completely competitive priority?

Current studies indicate a need to integrate environmental management with manufacturing strategy, including topics like cross-functional integration, environmental impact, and waste reduction. Nevertheless, such studies are relatively rare, existing still a need for research in specific regional contexts. At the same time, the results found are not unanimous. Due to these gaps, the objective of this article is to analyze if environmental management can be considered a new competitive priority for manufacturing enterprises located in Brazil. A cross-sectional survey was conducted with Brazilian companies certified by ISO 14001. Sixty-five valid questionnaires were analyzed through Structural Equation Modelling (SEM). The first conclusion is that environmental management presents a preventive approach in the sample analyzed, focused on eco-efficiency, what potentially do not to create a competitive advantage. This preventive approach inhibits environmental management from being regarded as a new competitive manufacturing priority, in the full sense as defined by the literature. Another important result is that environmental management, although following a preventive focus, may influence positively the four manufacturing priorities: cost, quality, flexibility and delivery.     

Reference values for heavy metals in soils of the Brazilian agricultural frontier in Southwestern Amazônia

Guideline values are used to identify polluted or contaminated areas based on background values. Brazilian law establishes three guideline values for pollutants: a quality reference value (QRV), a prevention value, and an intervention value. Reference values refer to the natural concentration of an element or a substance in soils that have not been modified by anthropogenic impacts. These values inform assessments of soil quality and are used to establish maximum permissible limits. The objective of this study was to determine the natural levels and reference values for Cd, Co, Cr, Cu, Ni, Pb, and Zn in samples from the surface layer (0–20 cm) of 19 representative soils of the states of Mato Grosso and Rondônia, on Brazil’s agricultural frontier. Pseudo-total metal concentrations were obtained following microwave-assisted digestion using the aqua regia and EPA3051 methods. QRVs were calculated for each element as the 75th and 90th percentiles of the frequency distribution of the data. Natural levels of heavy metals in the soil samples followed the order: Cr?>?Zn?>?Cu?>?Co?>?Pb?>?Ni?>?and Cd (aqua regia) and Cr?>?Co?>?Cu?>?Pb?>?Zn?>?Ni?>?Cd (EPA3051). These values are generally lower than those reported in the Brazilian and international literature, which highlights the importance of establishing reference values for each state or for each soil type, taking into account the geomorphological, pedological, and geological diversity of the region under study.     

Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min^?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76–128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m^?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.