Effects of phosphorothionate on the reproductive system of male rats

Acute and Sub-acute toxic effects of a new pesticide phosphorothionate coded as RPR-V on testis of albino rat were studied. For the acute study, rats received a single dose of 30 mg/kg of RPR-V and sacrificed after 24 hours. For the Subacute study, 1.42 mg/kg/day was administered orally to rats for 10 days and 21 days. Acute exposure of rats to RPR-V brought no change either in the Gonadosomatic Index (GSI) or in the structure of testis or in the serum levels of Testosterone. Similarly, no significant change was observed in the Glutathione S-transferase (GST) activity. But, in testis there was significant increased in the reduced Glutathione (GSH) and Acid Phosphatase (AcP), whereas Alkaline Phosphatase (AkP) levels decreased significantly at 24hr post treatment. On 7th day (withdrawal period) after the cessation of the treatment the GSH, AcP, and AkP levels reached to near control. The sub-acute study revealed a significant post treatment. Due to RPR-V treatment the testis AcP levels increased significantly at 21st day of medication but AkP levels decreased both at 10th and 21st day of post treatment. Histopathological studies showed that after 10th day testis showed considerable loss of spermatozoids and at 21st day complete derangement of cellular organization was observed. Testosterone levels decreased significantly after 10th day and remained significantly low at 21st day. However, withdrawal studies showed a recovery in testis of rat treated with RPR-V. GST, GSH, GSI, AcP and AkP values were recovered, testosterone levels were also recovered but recovery in testis structure remained at a low profile.     

An alternative to additional SO3 injection for fly ash conditioning

Small concentrations, approximately 2-10 parts per million (ppm), of injected sulfur trioxide (SO3) have improved particulate collection efficiencies of electrostatic precipitators burning lower-sulfur coal. However, the addition of extra SO3 not only incurs costs but also presents negative environmental effects. This work explored a method that could be applied to existing coal-fired power plants to convert the sulfur dioxide (SO2) already present in the flue gas to sufficient levels of SO3 for fly ash conditioning as an alternative to adding SO3 by burning elemental sulfur. During this research, a pre-mixed natural gas flame was used to promote the conversion of SO2 to SO3 in a drop-tube furnace with average non-flame, free stream gas temperatures of 450 and 1000 K. SO3 concentrations measured by wet chemistry and confirmed using elemental balances of other sulfur species measured by gas chromatography revealed that as much as 7% of SO2 was homogeneously transformed to SO3. The results also showed that at low temperatures, the rate at which SO3 is converted back to SO2 decreased, thus extending the time period during which SO3 concentrations would be sufficient for ash conditioning. An additional benefit of this technique is speculated to result from increased flue gas humidity.     

Toward a high-rate enhanced biological phosphorus removal process in a membrane-assisted bioreactor.

A membrane enhanced biological phosphorus removal (MEBPR) process was studied to determine the impact of hydraulic retention time (HRT) and solids retention time (SRT) on the removal of chemical oxygen demand (COD), nitrogen, and phosphorus from municipal wastewater. The MEBPR process was capable of delivering complete nitrification independent of the prevailing operating conditions, whereas a significant improvement in COD removal efficiency was observed at longer SRTs. In the absence of carbon-limiting conditions, the MEBPR process was able to achieve low phosphorus concentrations in the effluent at increasingly higher hydraulic loads, with the lowest HRT being 5 hours. The MEBPR process was also able to maintain optimal phosphorus removal when the SRT was increased from 12 to 20 days. However, at higher suspended solids concentrations, a substantial increase was observed in carbon utilization per unit mass of phosphorus removed from the influent. These results offer critical insights to the application of membrane technology for biological nutrient removal systems.     

Influence of aeration rate and reactor shape on the composting of poultry manure and sawdust

To achieve successful composting, all the biological, chemical, and physical characteristics need to be considered. The investigation of our study was based on various physicochemical properties, i.e., temperature, ammonia concentration, carbon dioxide concentration, pH, electrical conductivity (EC), carbon/nitrogen (C/N) ratio, organic matter (OM) content, moisture content, bacterial population, and seed germination index (GI), during the composting of poultry manure and sawdust for different aeration rates and reactor shapes. Three cylindrical-shaped and three rectangular-shaped pilot-scale 60-L composting reactors were used in this study, with aeration rates of 0.3 (low), 0.6 (medium), and 0.9 (high) L min^?1 kg^?1 DM (dry matter). All parameters were monitored over 21 days of composting. Results showed that the low aeration rate (0.3 L min^?1 kg^?1 DM) corresponded to a higher and longer thermophilic phase than did the high aeration rate (0.9 L min^?1 kg^?1 DM). Ammonia and carbon dioxide volatilization were directly related to the temperature profile of the substrate, with significant differences between the low and high aeration rates during weeks 2 and 3 of composting but no significant difference observed during week 1. At the end of our study, the final values of pH, EC, moisture content, C/N ratio, and organic matter in all compost reactors were lower than those at the start. The growth rates of mesophilic and thermophilic bacteria were directly correlated with mesophilic and thermophilic conditions of the compost. The final GI of the cylindrical reactor with an airflow rate of 0.3 L min^?1 kg^?1 DM was 82.3%, whereas the GIs of the other compost reactors were below 80%. In this study, compost of a cylindrical reactor with a low aeration rate (0.3 L min^?1 kg^?1 DM) was more stable and mature than the other reactors.

Implications: The poultry industry is growing in South Korea, but there are problems associated with the management of poultry manure, and composting is one solution that could be valuable for crops and forage if managed properly. For high-quality composting, the aeration rate in different reactor shapes must be considered. The objective of this study was to investigate various physicochemical properties with different aeration rates and rector shapes. Results showed that aeration rate of 0.3 L min^?1 kg^?1 DM in a cylindrical reactor provides better condition for maturation of compost.     

Solubilities of trace copper and lead species and the complexing capacity of river water in the Linggi River Basin

Chemical forms of copper and lead in river water of the Linggi River Basin have been fractionated into ASV labile, moderately labile, slowly labile, and inert metal species, based on a previously proposed scheme. Free (hydrated) metal ions were identified by a potentiometric method using an ion selective electrode. Speciation results showed that the soluble copper and lead species occurred mainly in the moderately labile and slowly labile fractions. The speciation results are primarily interpreted in terms of organic interaction due to agricultural based and light industries, and urban discharges. The measured metal complexing capacity (MCC) of the samples reveals consistency of the results with the nature of the discharge. MCC correlates reasonably well with the value from the permanganate test on the river water. In general, the speciation pattern was found to be consistent with the findings of other workers.     

Organochlorine pesticide residues in catfish,Tachysurus thalassinus (Ruppell, 1835), from the South Patches of the Bay of Bengal

Twenty-one wild brown rats (Rattus norvegicus) were collected from four areas of Milan (Italy). Main organs were harvested from each rat, fixed in 10% neutral buffer formalin, and embedded in paraffin. Organ sections were stained with hematoxylin and eosin, kidney sections were also stained with the Ziehl-Neelsen method. Graphite furnace atomic absorption spectrophotometry was performed on all kidney samples. The presence of inclusion bodies and karyocytomegaly was scored. Six adult rats out of 21 (28.6%) showed kariocytomegaly and intranuclear inclusion bodies of the renal proximal tubules, characteristic of lead toxicity. The nuclear inclusion bodies were always Ziehl-Neelsen positive. The six rats which showed the characteristic histological alterations ascribed to lead, had lead concentrations statistically higher than the three control rats (4 microg/g wet wt. versus 0.09 microg/g wet wt., P<0.001) and than the captured wild rats. Intranuclear inclusion bodies were found in rats with kidney lead concentrations greater than 0.6 microg/g wet weight. There were significant differences between the four areas of capture. The incidence of intranuclear inclusion bodies and karyocytomegaly in proximal tubular cells was higher in rats with high lead levels detected by spectrophotometry. The present results indicate a renal lead concentration of 0.6 microg/g wet weight as a threshold to detect histologic kidney changes due to lead absorption. Results demonstrate that the examination of adult free-living rats may be considered an appropriate method to obtain a rapid, sensitive, easy, cost effective estimate of lead contamination in urban areas. Animal models allow us to evaluate potential human health risk associated with environmental contamination.     

A focus of lymphatic filariasis in a tea garden worker community of central Assam

A survey for lymphatic filariasis was conducted among tea garden workers of central Assam. Of the 656 night blood samples examined, 31 were found positive for Wuchereria bancrofti parasite (microfilaria rate 4.7%). Microfilaria rate was higher in male (7.3%) than females (2.1%). Culex quinquefasciatus was incriminated as vector mosquito.     

Induced alkaloid defence inAtropa acuminata in response to mechanical and herbivore leaf damage

Summary Measurement of tropane alkaloid content in leaves ofAtropa acuminata after mechanical damage showed a maximum increase to 153% of the control 8 days later. There were no changes in the root or stem after similar damage. The plant responded to repeated mechanical damage by doubling its alkaloid content at 11 days after the initial wounding. But on further treatments, there was a slight decrease in alkaloid content with time. Mollusc feeding produced an increase of 164% in alkaloid content after 4 days. These results indicate that induced defence systems in angiosperms can vary considerably from plant species to plant species and that the effects of mechanical damage may differ in different parts of the same plant.     

Estimation of probabilities and likely consequences of a chain of accidents (domino effect) in Manali Industrial Complex

Chains of accidents (the domino effect) have been occurring with ever increasing frequency in chemical process industries. This is reflected in several accidents ‘J Loss Prevent Process Ind 12 (1999a) 361’; the world's worst industrial accident of the 1990s — the Vishakhpatnam disaster — also involved the domino effect ‘J Loss Prevent Process Ind 12 (1999a) 361; and Process Safety Prog 18 (1999b) 135’. Such chains of accidents have a greater propensity to cause damage than stand-alone accidents ‘Process Safety Prog 17(2) (1998a) 107; and J Loss Prevent Process Ind 12 (1999a) 361’.In order to assess the likelihood of occurrence of the domino effect and its damage potential, use of deterministic models in conjunction with probabilistic analysis is required. Recently we have proposed a systematic methodology called ‘domino effect analysis’ (DEA). A computer-automated tool, DOMIFFECT, has also been developed by us based on DEA ‘Process Safety Prog 17(2) (1998a) 107; Environment Model Software 13 (1998b) 163; and Risk assessment in chemical process industries: advanced techniques. Discovery Publishing House (1998c)’.This paper illustrates the application of DEA and DOMIFFECT to an industrial complex comprising 16 different industries. Out of 12 credible accident scenarios envisaged in three different industries — namely Madras Refineries Limited (MRL), UB Petrochemicals (UBP) and Indian Organic Chemicals Limited (IOCL), eight scenarios are likely to cause the domino effect. A further detailed analysis reveals that accidents in the storage of liquified petroleum gas and propylene and in the reflux drum units of MRL may cause domino effects. Similarly, propylene storage of UBP and monoethylene glycol storage of IOCL are also likely to cause domino effects. The impact of various chains of accidents has been forecast which reveals that in several cases the accidents may be catastrophic, harming the entire industrial complex of 16 industries. The study leads to the identification of ‘hot spots’ — units that pose the greatest risk — in turn forewarning the industries concerned and enabling them to prioritize and augment accident-prevention steps.     

Dynamic temperature model for proton exchange membrane fuel cell using online variations in load current and ambient temperature

This paper presents a dynamic temperature model for a proton exchange membrane fuel cell (PEMFC) system. The proposed model overcomes the complexity of conventional models using first-order expressions consisting of load current and ambient temperature. The proposed model also incorporates a PEMFC cooling system, which depends upon the temperature difference between events. A dynamic algorithm is developed to detect load changing events and calculate instantaneous PEMFC temperature variations. The parameters of the model are extracted by employing the lightning search algorithm (LSA). The temperature characteristics of the NEXA 1.2 kW PEMFC system are experimentally studied to validate model performance. The results show that the proposed model output and the temperature data obtained from experiments for linear and abrupt changes in PEMFC load current are in agreement. The root-mean-square error between the model output and experimental results is less than 0.9. Moreover, the proposed model outperforms the conventional models and provides advantages such as simplicity and adaptability for low and high sampling data rates of input variables, namely, load current and ambient temperature. The model is not only helpful for simulations but also suitable for dynamic real-time controllers and emulators.