Exploring the potential effect of Achnatherum splendens L.–derived biochar treated with phosphoric acid on bioavailability of cadmium and wheat growth in contaminated soil

Environmental Science and Pollution Research - Biochar remediation efficiency could be enhanced through numerous treatments such as acids treatment. Still, there has little work done on...     

Semicontinuous PM2.5 sulfate and nitrate measurements at an urban and a rural location in New York: PMTACS-NY summer 2001 and 2002 campaigns

Several collocated semicontinuous instruments measuring particulate matter with particle sizes < or =2.5 microm (PM2.5) sulfate (SO4(2-)) and nitrate (NO3-) were intercompared during two intensive field campaigns as part of the PM2.5 Technology Assessment and Characterization Study. The summer 2001 urban campaign in Queens, NY, and the summer 2002 rural campaign in upstate New York (Whiteface Mountain) hosted an operation of an Aerosol Mass Spectrometer, Ambient Particulate Sulfate and Nitrate Monitors, a Continuous Ambient Sulfate Monitor, and a Particle-Into-Liquid Sampler with Ion Chromatographs (PILS-IC). These instruments provided near real-time particulate SO4(2-) and NO3- mass concentration data, allowing the study of particulate SO4(2-)/NO3- diurnal patterns and detection of short-term events. Typical particulate SO4(2-) concentrations were comparable at both sites (ranging from 0 to 20 microg/m3), while ambient urban particulate NO3- concentrations ranged from 0 to 11 microg/m3 and rural NO3- concentration was typically less than 1 microg/m3. Results of the intercomparisons of the semicontinuous measurements are presented, as are results of the comparisons between the semicontinuous and time-integrated filter-based measurements. The comparisons at both sites, in most cases, indicated similar performance characteristics. In addition, charge balance calculations, based on major soluble ionic components of atmospheric aerosol from the PILS-IC and the filter measurements, indicated slightly acidic aerosol at both locations.     

Violence breeds violence: burnout as a mediator between patient violence and nurse violence

The present study examines whether patient-perpetrated violence triggers anger, hatred and other negative emotions that, under certain circumstances, might motivate nurses to behave violently with patients. In doing so, this study considers burnout as a mediator in the patient violence–nurse violence relationship. To test the causal paths, data were collected from 182 nurses working in two government-sector teaching hospitals of Pakistan's Punjab province. Results confirm that patient violence toward nurses leads to nurse violence toward patients through the mediating effect of burnout. The study advises hospitals to provide wellness and stress management programs to nurses who regularly experience events involving patient violence. Hospitals may consider allowing nurses to take short breaks after an encounter with violently behaving patients. In addition, hospitals should conduct empathy-promoting training, emotional intelligence training and ‘lens of the patient’ training programs to sensitize their nursing staff.     

Assessment of sunflower germplasm for phytoremediation of lead-polluted soil and production of seed oil and seed meal for human and animal consumption

Phytoremediation is a valuable technology for mitigating soil contamination in agricultural lands,but phytoremediation without economic revenue is unfeasible for land owners and farmers.The use of crops with high biomass and bioenergy for phytoremediation is a unique strategy to derive supplementary benefits along with remediation activities.Sunflower(Helianthus annuus L.) is a high-biomass crop that can be used for the phytoremediation of polluted lands with additional advantages(biomass and oi...     

The green state and industrial decarbonisation

ABSTRACT

The large share of carbon emitted by energy-intensive industries in the extraction and processing of basic materials must be limited to decarbonise society and the economy. Ways in which the state can govern industrial decarbonisation and contributes to green state theory are explored by addressing a largely ignored issue: the green state’s industrial relations and its role in industrial governance. With insights from a Swedish case study, the tension between the state’s economic imperative and ecological concerns in greening industry are shown to persist. However, as the energy-intensive industry’s previously privileged position in the economy is weakening, industry is opened to decarbonisation strategies. While the case exposes a number of governance challenges, it also suggests potential areas where the state can pursue decarbonisation in energy-intensive industry and points the way to an active role of the green state in governing industrial decarbonisation and greening industry.     

Anaerobic-aerobic treatment of purified terephthalic acid (PTA) effluent; a techno-economic alternative to two-stage aerobic process

This paper addresses the treatment of purified terephthalic acid (PTA) effluent using anaerobic and aerobic processes. Laboratory studies were carried out on flow proportionate composite wastewater generated from the manufacturing of PTA. An activated sludge process (ASP-two stage and single stage) and an upflow anaerobic fixed film fixed bed reactor (AFFFBR) were used, individually and in combination. The performance of a full-scale ETP under existing operating conditions was also studied. Full scale ETP studies revealed that the treatment of PTA effluent using a two-stage ASP alone does not meet treated effluent quality within the prescribed Indian Standards. The biomass produced in the two stage ASP was very viscous and fluffy and the sludge volume index (SVI) was very high (200-450 ml/g). However, pretreatment of PTA effluent using an upflow AFFFBR ensured substantial reduction in BOD (63%) and COD (62%) with recovery of biogas at 1.8-1.96 l/l effluent treated at a volumetric loading rate (VLR) 4-5 kg COD/m(3) d. The methane content in the biogas varied between 55% and 60%. The pretreated effluent from the upflow AFFFBR was then treated through a single stage ASP. The biomass produced in the ASP after anaerobic treatment had very good settlability (SVI: 75-90 ml/g) as compared to the two stage ASP and the treated effluent quality with respect to BOD, COD and SS was within the prescribed Indian Standards. The alternative treatment process comprising an upflow AFFFBR and a single stage ASP ensured net power saving of 257 kW and in addition generated 442 kW of power through the AFFFBR.     

Potential applications of immobilized bitter gourd (Momordica charantia) peroxidase in the removal of phenols from polluted water

The potential applications of immobilized bitter gourd peroxidase in the treatment of model wastewater contaminated with phenols have been investigated. The synthetic water was treated with soluble and immobilized enzyme preparations under various experimental conditions. Maximum removal of phenols was found in the buffers of pH values 5.0-6.0 and at 40 degrees C in the presence of 0.75 mM H(2)O(2). Fourteen different phenols were independently treated with soluble and immobilized bitter gourd peroxidase in the buffer of pH 5.6 at 37 degrees C. Chlorinated phenols and native phenol were significantly removed while other substituted phenols were marginally removed by the treatment. Phloroglucinol and pyrogallol were recalcitrant to the action of bitter gourd peroxidase. Immobilized bitter gourd peroxidase preparation was capable of removing remarkably high percentage of phenols from the phenolic mixtures. Significantly higher level of total organic carbon was removed from the model wastewater containing individual phenol or complex mixture of phenols by immobilized bitter gourd peroxidase as compared to the soluble enzyme. 2,4-dichlorophenol and a phenolic mixture were also treated in a stirred batch reactor with fixed quantity of enzyme for longer duration. The soluble bitter gourd peroxidase ceased to function after 3h while the immobilized enzyme was active even after 6h of incubation with phenolic solutions.     

Idle emissions from heavy-duty diesel vehicles: review and recent data

Heavy-duty diesel vehicle idling consumes fuel and reduces atmospheric quality, but its restriction cannot simply be proscribed, because cab heat or air-conditioning provides essential driver comfort. A comprehensive tailpipe emissions database to describe idling impacts is not yet available. This paper presents a substantial data set that incorporates results from the West Virginia University transient engine test cell, the E-55/59 Study and the Gasoline/Diesel PM Split Study. It covered 75 heavy-duty diesel engines and trucks, which were divided into two groups: vehicles with mechanical fuel injection (MFI) and vehicles with electronic fuel injection (EFI). Idle emissions of CO, hydrocarbon (HC), oxides of nitrogen (NOx), particulate matter (PM), and carbon dioxide (CO2) have been reported. Idle CO2 emissions allowed the projection of fuel consumption during idling. Test-to-test variations were observed for repeat idle tests on the same vehicle because of measurement variation, accessory loads, and ambient conditions. Vehicles fitted with EFI, on average, emitted approximately 20 g/hr of CO, 6 g/hr of HC, 86 g/hr of NOx, 1 g/hr of PM, and 4636 g/hr of CO2 during idle. MFI equipped vehicles emitted approximately 35 g/hr of CO, 23 g/hr of HC, 48 g/hr of NOx, 4 g/hr of PM, and 4484 g/hr of CO2, on average, during idle. Vehicles with EFI emitted less idle CO, HC, and PM, which could be attributed to the efficient combustion and superior fuel atomization in EFI systems. Idle NOx, however, increased with EFI, which corresponds with the advancing of timing to improve idle combustion. Fuel injection management did not have any effect on CO2 and, hence, fuel consumption. Use of air conditioning without increasing engine speed increased idle CO2, NOx, PM, HC, and fuel consumption by 25% on average. When the engine speed was elevated from 600 to 1100 revolutions per minute, CO2 and NOx emissions and fuel consumption increased by >150%, whereas PM and HC emissions increased by approximately 100% and 70%, respectively. Six Detroit Diesel Corp. (DDC) Series 60 engines in engine test cell were found to emit less CO, NOx, and PM emissions and consumed fuel at only 75% of the level found in the chassis dynamometer data. This is because fan and compressor loads were absent in the engine test cell.     

Photocatalytic degradation of crystal violet dye under sunlight by chitosan-encapsulated ternary metal selenide microspheres

Environmental Science and Pollution Research - Organic dyes that are extensively released in wastewater from various industries remain the priority concern in the modern world. Therefore, a novel...     

Effects of three biochars on copper immobilization and soil microbial communities in a metal-contaminated soil using a metallophyte and two agricultural plants

Environmental Geochemistry and Health - Biochar (BC) is a porous, carbonaceous material produced by slow pyrolysis of biomass under oxygen-limited conditions. BC production has been attracting...