Quantifying the effect of strong ignition sources on particle preconditioning and distribution in the 20-L chamber

Computational fluid dynamics is used to investigate the preconditioning aspect of overdriving in dust explosion testing. The results show that preconditioning alters both the particle temperature and distribution prior to flame propagation in the 20-L chamber. A parametric study gives the fluid pressure and temperature, and particle temperature and concentration at an assumed flame kernel development time (10 ms) for varying ignitor size and particle diameter. For the 10 kJ ignitor with 50% efficiency, polyethylene particles under 50 μm reach 400 K and may melt prior to flame propagation. Gases from the ignitor detonation displace the dust from the center of the chamber and may increase local particle concentration up to two times the nominal value being tested. These effects have important implications for explosive testing of dusts in the 20-L chamber and comparing to larger 1-m³ testing, where these effects may be negligible.     

Dynamic safety analysis of process systems by mapping bow-tie into Bayesian network

Among the various techniques used for safety analysis of process systems, bow-tie (BT) analysis is becoming a popular technique as it represents an accident scenario from causes to effects. However, the BT application in the dynamic safety analysis is limited due to the static nature of its components, i.e. fault tree and event tree. It is therefore difficult in BT to take accident precursors into account to update the probability of events and the consequent risk. Also, BT is unable to represent conditional dependency. Event dependency is common among primary events and safety barriers. The current paper illustrates how Bayesian network (BN) helps to overcome these limitations. It has also been shown that BN can be used in dynamic safety analysis of a wide range of accident scenarios due to its flexible structure. This paper also introduces the application of probability adapting in dynamic safety analysis rather than probability updating. A case study from the U.S. Chemical Safety Board has been used to illustrate the application of both BT and BN techniques, with a comparison of the results from each technique.     

Precursor-based hierarchical Bayesian approach for rare event frequency estimation: A case of oil spill accidents

Due to a scarcity of data, the estimate of the frequency of a rare event is a consistently challenging problem in probabilistic risk assessment (PRA). However, the use of precursor data has been shown to help in obtaining more accurate estimates. Moreover, the use of hyper-priors to represent prior parameters in the hierarchical Bayesian approach (HBA) generates more consistent results in comparison to the conventional Bayesian method. This study proposes a framework that uses a precursor-based HBA for rare event frequency estimation. The proposed method is demonstrated using the recent BP Deepwater Horizon accident in the Gulf of Mexico. The conventional Bayesian method is also applied to the same case study. The results show that the proposed approach is more effective with regards to the following perspectives: (a) using the HBA in the proposed framework provides an opportunity to take full advantage of the sparse data available and add information from indirect but relevant data; (b) the HBA is more sensitive to changes in precursor data than the conventional Bayesian method; and (c) using hyper-priors to represent prior parameters, the HBA is able to model the variability that can exist among different sources of data.     

A Study on the Combined Effect of Noise and Vibration on Operators’ Performance of a Readability Task in a Mobile Driving Environment

This paper presents a study in which the main objective was to investigate the combined effect of noise and vibration on the performance of a readability task in a mobile driving environment. Subjects performed a readability task on a laptop computer in a sitting posture with their backs supported with a backrest under varying levels of noise and vibration. The data in terms of the mean number of characters read per minute were collected and statistically analyzed. Results showed that the individual effect of noise, vibration, and the operators’ gender as well as the interaction between gender and noise, and gender and vibration were statistically significant. However, the combined effect of noise and vibration was not found to be statistically significant. Results also indicated that gender was statistically significant at all levels of noise as well as vibration, and noise and vibration were statistically significant at both levels of gender.     

A LUMPED APPROACH TO THE INVERSE PROBLEM IN GROUND WATER HYDROLOGY1

ABSTRACT: A solution procedure to solve the inverse problem in ground water, based on lumped approach, has been proposed. The method has the following advantages: 1) exact determination of the boundary conditions and the physical laws of flow through porous media is not required; 2) all errors of approximation in describing the boundary conditions, physical laws, and the aquifer properties are lumped into the surrogate parameters; and 3) the same mathematical model can be employed both in the identification process and in the subsequent management studies. The optimal values of the surrogate parameters are found by using a multidimensional unconstrained optimization code devised by Powell. The solution procedure and the convergence characteristics of the proposed algorithm have been illustrated by two hypothetical problems.     

The antischistosomal activity of substituted indoles

5-Bromoindole carboxylic acid and substituted indoles were administered parenterally to hamsters infected with an Egyptian strain of S. mansoni, to assess their antischistosomal activity. 5-Bromoindole showed a significant hepatic shift in 59 percent of treated hamsters. The results suggest that modification of the indole nucleus may produce a series of antischistosomal agents.     

Development of regional climate mitigation baseline for a dominant agro-ecological zone of Karnataka,India

Setting a baseline for carbon stock changes in forest and land use sector mitigation projects is an essential step for assessing additionality of the project. There are two approaches for setting baselines namely, project-specific and regional baseline. This paper presents the methodology adopted for estimating the land available for mitigation, for developing a regional baseline, transaction cost involved and a comparison of project-specific and regional baseline. The study showed that it is possible to estimate the potential land and its suitability for afforestation and reforestation mitigation projects, using existing maps and data, in the dry zone of Karnataka, southern India. The study adopted a three-step approach for developing a regional baseline, namely: (i) identification of likely baseline options for land use, (ii) estimation of baseline rates of land-use change, and (iii) quantification of baseline carbon profile over time. The analysis showed that carbon stock estimates made for wastelands and fallow lands for project-specific as well as the regional baseline are comparable. The ratio of wasteland Carbon stocks of a project to regional baseline is 1.02, and that of fallow lands in the project to regional baseline is 0.97. The cost of conducting field studies for determination of regional baseline is about a quarter of the cost of developing a project-specific baseline on a per hectare basis. The study has shown the reliability, feasibility and cost-effectiveness of adopting regional baseline for forestry sector mitigation projects.

A rough set-based quality function deployment (QFD) approach for environmental performance evaluation: a case of offshore oil and gas operations

Activities in offshore oil and gas (OOG) that cause environmental impacts can be systematically managed through an environmental management system (EMS). Environmental performance evaluation (EPE) is an essential part of an EMS. However, previous studies on EPE indicate that existing lists of indicators little insight into how indicators are modified to more accurately assess environmental performance.In this paper, a way is proposed to identify and define specific environmental performance indicators on a case-by-case basis, which consists of five steps: (1) describing environmental requirements; (2) determining favourable outcomes corresponding to the requirements; (3) identifying required activities or issues to achieve the outcomes; (4) searching for proper measures of the activities or issues; and (5) generating a list of key indicators. Based on these steps, a quality function deployment (QFD) approach is developed to determine key indicators and evaluate environmental performance. To handle uncertainties in QFD, the decision makers’ evaluations are quantified through rough numbers using the concept of rough sets. The outputs of the proposed approach are different environmental performance indices. Using these indices, decision makers can easily determine whether an improved performance has been achieved through an EMS. The proposed approach is transparent and promising for use as a unified tool for EPE. An application of the proposed approach is demonstrated through a numerical example.