Use of an Action‐Selection Framework for Human‐Carnivore Conflict in the Bangladesh Sundarbans

Abstract: Human–carnivore conflict is manifested in the death of humans, livestock, and carnivores. The resulting negative local attitudes and retribution killings imperil the future of many endangered carnivores. We tailored existing management tools to create a framework to facilitate the selection of actions to alleviate human–carnivore conflict and applied the framework to the human–tiger conflict in the Bangladesh Sundarbans. We identified potential actions that consider previous management efforts, local knowledge, cost‐effectiveness, fieldwork experience of authors and project staff, previous research on tiger ecology by the authors, and recommendations from human–carnivore conflict studies in other countries. Our framework includes creation of a profile to improve understanding of the nature of the conflict and its underlying causality. Identified actions include deterrents, education, direct tiger management, and response teams. We ranked actions by their potential to reduce conflict and the monetary cost of their implementation. We ranked tiger‐response teams and monitoring problem tigers as the two best actions because both had relatively high impact and cost‐effectiveness. We believe this framework could be used under a wide range of human–wildlife conflict situations because it provides a structured approach to selection of mitigating actions.     

INSTANTANEOUS PEAK FLOW ESTIMATION PROCEDURES FOR NEWFOUNDLAND STREAMS1

ABSTRACT: A procedure of estimating instantaneous flood flows for various return periods on the Island of Newfoundland is presented. The procedure is based on annual maximum instantaneous flows rather than annual maximum daily-mean flows, as the latter requires the conversion of estimated daily-mean flows into instantaneous flows. Regression equations were developed for each of three homogeneous regions for the desired return periods. The flood flow estimation capability of the presented procedure is demonstrated to be better than any other currently available procedure on the Island.     

MODEL FOR PREDICTING TRANSPORT OF PESTICIDES AND THEIR METABOLITES IN THE UNSATURATED ZONE1

ABSTRACT: A finite element model based on Galerkin's upstream weighted residual technique was developed to predict the simultaneous convective-dispersion transport and transformations of pesticides and their metabolites in the unsaturated zone. Transformations of the parent compound and its metabolites were assumed to be first-order reactions for oxidation and hydrolysis, while adsorption of the pesticide species (parent compound and metabolites) to the soil components was assumed to be represented by a linear equilibrium (Freundlich type) isotherm. Volatilization and plant root uptake of pesticides in the solution phase were neglected in the analysis. The proposed model was used to simulate the transport and transformation of aldicarb and its metabolites, aldicarb sulfoxide and aldicarb sulfone, in the soil profile. Several examples are used to demonstrate the accuracy, validity, and applicability of the proposed model. Simulated results indicate that the proposed model can potentially be used to estimate the mass flux of water, and pesticide and pesticide metabolite concentrations in the subsurface environment. However, further verification of the model against actual field data is needed to fully demonstrate the model's potential.     

Canada shows the way

Editorial

Canada shows the way     

Deposition and Storage of Spheroidal Carbonaceous Fly-Ash Particles in European Mountain Lake Sediments and Catchment Soils

Spheroidal carbonaceous particles(SCPs) are produced only from high temperaturecombustion of fossil-fuels. In mountain lakesystems, they provide an unambiguous indicator ofatmospheric deposition. In order to comparedepositional fluxes of SCPs between mountainareas experiencing various pollutant regimes,intensive bulk deposition sampling was undertakenat five sites across Europe. Catchment soil coresand lake sediment cores were also taken at eachsite to compare SCP storage over the post-industrial period. Atmospheric, sediment and soilSCP data showed similar patterns. Highestcontamination was found in Scotland, Slovakia andSpain with the Austrian site intermediate and themid-Norwegian site least contaminated. A highproportion of accumulated SCPs were found to bestored in catchment soils at each site.Therefore, a significant increase in soilerosion, possibly as a result of future climatechange, could lead to the input of largequantities of catchment stored SCPs and, byimplication, other atmospherically depositedcontaminants to the lake ecosystem.     

Trends in the Water Chemistry of High Altitude Lakes in Europe

Here we present the chemical trends of seven high altitude lakes, analysed within the AL:PE and MOLAR Projects of the EU (1999) and selected on the basis of the availability of complete and reliable data for the period 1984–1999. The lakes are representative of the Scandinavian Alps, the Cairngorm Mountains in Scotland, the Alps and the Pyrenees. Significant trends were identified for some indicators of acidification, for instance pH and alkalinity, but not all lakes reacted similarly to decreasing depositions of sulphate and base cations. Differences in lake response are discussed in relation to recent variations of atmospheric deposition chemistry and associated changes in climatic conditions. Beside individual variations of the studied lakes, depending, among other things, on altitude and morphology, catchment characteristics and climate trends play a major role for the reaction of high altitude lakes on changes in atmospheric depositions.     

EFFECTS OF SLUDGE AND CHEMICAL FERTILIZER APPLICATION ON RUNOFF WATER QUALITY1

ABSTRACT: Simulated rainfall was used on experimental field plots to compare the effect of chemical fertilizer and sludge application on sediment, nitrogen, and phosphorus in runoff from no-till and conventional tillage systems. Chemical fertilizer application under the no-till system resulted in the least amount of total N and P in surface runoff. However, sludge application under the no-till system resulted in the least amount of NO₃-N and sediment in surface runoff. The worst water quality scenarios were observed when either sludge or chemical fertilizer were surface-applied under a conventional tillage system. Nitrogen losses from the conventional tillage system were minimized when sludge was incorporated into the soil. However, phosphorus and sediment yield from such a system were significantly higher when compared to phosphorus and sediment yield from the no-till system. The results from this study indicate that the use of sludge on agricultural land under a no-till system can be a viable alternative to chemical fertilizer for nitrogen and phosphorus control in runoff. A more cautious approach is recommended when the sludge is incorporated into the soil in a conventional tillage system because of potential for high sediment and phosphorus yield in surface runoff.     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Regulation of nuclear radiation exposures in India

India has a long-term program of wide spread applications of nuclear radiations and radioactive sources for peaceful applications in medicine, industry, agriculture and research and is already having several thousand places in the country where such sources are being routinely used. These places are mostly outside the Department of Atomic Energy (DAE) installations. DAE supplies such sources. The most important application of nuclear energy in DAE is in electricity generation through nuclear power plants. Fourteen such plants are operating and many new plants are at various stages of construction. In view of the above mentioned wide spread applications, Indian parliament through an Act, called Atomic Energy Act, 1964 created an autonomous body called Atomic Energy Regulatory Board (AERB) with comprehensive authority and powers. This Board issues codes, guides, manuals, etc., to regulate such installations so as to ensure safe use of such sources and personnel engaged in such installations and environment receives radiation exposures within the upper bounds prescribed by them. Periodic reports are submitted to AERB to demonstrate compliance of its directives. Health, Safety and Environment Group of Bhabha Atomic Research Centres, Mumbai carries out necessary surveillance and monitoring of all installations of the DAE on a routine basis and also periodic inspections of other installations using radiation sources. Some of the nuclear fuel cycle plants like nuclear power plants and fuel reprocessing involve large radioactive source inventories and have potential of accidental release of radioactivity into the environment, an Environmental Surveillance Laboratory (ESL) is set up at each such site much before the facility goes into operation. These ESL's collect baseline data and monitor the environment throughout the life of the facilities including the decommissioning stage. The data is provided to AERB and is available to members of the public. In addition, a multi-tier system of AERB permissions is in place to ensure that all aspects of safety have been considered before permission to operate is granted. The stages where permission of AERB is essential are site selection, design data, and several stages during construction and operation. The details required by AERB include provision for treatment and storage of radioactive waste, de-commissioning procedures and provision of costs. In addition to AERB, nuclear power plants have to comply with the requirements of Ministry of Environment and Forests and get their clearance. This is given on the basis of Environmental Impact Assessment Report which should satisfy the authorities that no ecological damage will be caused and the facility will not have adverse effect on the environment. In addition, the State Pollution Control Board where the facility is to be located has to permit the site of the plant for its proposed discharges into the environment. It is largely due to the above comprehensive regulatory controls that none of the plants in India had any accident during the last 34 decades of operation. The type of measurements carried out by the ESL's and results from a few typical ESL's will be presented.