Types,sources, socioeconomic impacts,and control strategies of environmental noise: a review

Noise exposure has reached an alarming degree over the years because of rapid growth in the industry, transportation, and urbanization. Therefore, it is a dire need to provide awareness of the sources and mitigation strategies of noise, and to highlight the health, and socio-economic impacts of noise. A few research studies have documented this emerging issue; however, there is no comprehensive document describing all types of noise, their impacts on living organisms, and control strategies. This review article summarizes the sources of noise; their effects on industrial workers, citizens, and animals; and the value of property in noisy areas. The plethora of literature is showing an increased level of noise in various cities of the world, which have various health consequences such as high blood pressure, insomnia, nausea, heart attack, exhaustion, dizziness, headache, and triggered hearing loss. Apart from humans, noise also affects animal habitat, preying, and reproduction ability; increases heart rate and hearing loss to even death and loss in property value; and impairs the hospital environment. Finally, we have discussed the possible strategies to mitigate the noise problem, policy statements, and regulations to be followed, with future research directions based on the identified research gaps.

     

Investigation of long-term hazards of chemical weapon agents in the environment of Sardasht area,Iran

Environmental Science and Pollution Research - The present study aimed to investigate the persistence and existence of chemical warfare agents (CWAs) and related dissipation products in the...     

Multivariate modeling of agricultural river water abstraction via novel integrated-wavelet methods in various climatic conditions

Environment, Development and Sustainability - Water resource management in the agricultural sector is a necessity that profoundly impacts water resources conservation for future generations. With...     

Optimization of copper recovery from electronic waste using response surface methodology and Monte Carlo simulation under uncertainty

Journal of Material Cycles and Waste Management - Electronic waste (e-waste) production is currently the largest growing waste stream in the world. These wastes contain the precious metals such as...     

Improving the Antibacterial Activity of Curcumin Loaded Nanoparticles in Wastewater Treatment by Enhancing Permeability and Sustained Release

Journal of Polymers and the Environment - In this research, the antibacterial effect of curcumin entrapped in polymeric nanoparticles (mPEG-PCL/curcumin) on resistant bacteria were investigated....     

Channel coordination and profit distribution in a three-echelon supply chain considering social responsibility and product returns

Environment, Development and Sustainability - By developing markets and increasing world competition, today, companies' success is not only related to their performance but also the interaction...     

Occurrence,impact, toxicity,and degradation methods of microplastics in environment—a review

Environmental Science and Pollution Research - Microplastic defines as a tiny plastic particle that has a size of less than 5 mm and is ubiquitous in the environment. Due to the tiny size,...     

Tannic acid as a novel and green leaching reagent for cobalt and lithium recycling from spent lithium-ion batteries

Tannic acid–acetic acid is proposed as novel and green chemicals for cobalt and lithium recycling from spent lithium-ion batteries through a leaching process. The synergism of both acids was documented through batch and continuous studies. Tannic acid promotes cobalt dissolution by reducing insoluble Co³⁺ into soluble Co²⁺, while acetic acid is critical to improve the dissolution and stabilize the metals in the pregnant leach solution. Based on batch studies, the optimum conditions for metal recovery at room temperature are acetic acid 1 M, tannic acid 20 g/L, pulp density 20 g/L, and stirring speed 250 rpm (94% cobalt and 99% lithium recovery). The kinetic study shows that increasing temperature to 80 °C improves cobalt and lithium recovery from 65 to 90% (cobalt) and from 80 to 99% (lithium) within 4 h at sub-optimum condition (tannic acid 10 g/L). Kinetic modeling suggests the leaching process was endothermic, and high activation energy indicates a surface chemical process. For other metals, the pattern of manganese and nickel recovery trend follows the cobalt recovery trend. Copper recovery was negatively affected by tannic acid. Iron recovery was limited due to the weak acidic condition of pregnant leach solution, which is beneficial to improve leaching selectivity.

     

Removal of Reactive Blue 19 dye from synthetic wastewater using UV/H2O2 and UV/Cl advanced oxidation processes

The textile and dyeing industries are among the largest water-consuming and polluting industries in the world. The most important feature of the textile dyeing industry wastewater is its color, due to the use of colored materials. Most of these dye compounds are resistant to conventional purification methods and their biodegradation is very low through secondary purification processes, resulting in incomplete removal. Therefore, selecting the optimal method to remove these color compounds is essential. In this study, we studied the removal of an organic dye contaminant (Reactive Blue dye 19 [RB19]) using advanced oxidation processes (AOPs). For this purpose, ultraviolet (UV) mercury lamps with a wavelength of 254 nm and a voltage of W16 inside a reactor were used as an energy source. The experiments were performed in a collimated beam reactor inside a dark chamber. Two oxidizers, sodium hypochlorite (NaOCl) and hydrogen peroxide (H₂O₂), were used to remove RB19 from the artificial sewage stream. Removal of RB19 with a concentration of 20 mg/L with variable pH (5, 7, and 9), oxidant concentrations (5, 10, and 20 mg/L), and time (5, 10, 15, and 30 min) were investigated during the processes of photolysis, chemical oxidation (by H₂O₂ and NaOCl), and UV/NaOCl and UV/H₂O₂ AOPs. The photolysis process did not remove the RB19. The highest removal efficiencies of RB19 by chemical oxidation processes with NaOCl and H₂O₂, UV/NaOCl, and UV/H₂O₂ at optimal conditions (pH = 5, [oxidant] = 20 mg/L, RB19 = 20 mg/L, and radiation intensity of 1005 mJ/cm²) were 64.49%, 0.88%, 99.7%, and 13.31%, respectively. These results indicate that the hydroxyl radical was produced, under optimum conditions, more in the acidic medium; thus, the RB19 removal efficiency was higher in the acidic medium. The combination of UV rays with oxidants resulted in the production of more hydroxyl radicals and increased removal efficiency.