Experimental investigation,intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite

Dry wire electrical discharge machining (WEDM) is an environmentally friendly modification of the oil WEDM process in which liquid dielectric is replaced by a gaseous medium. In the present work, parametric analysis has been fulfilled while dry WEDM of Al–SiC metal matrix composite. Experiments were designed and conducted based on L₂₇ Taguchi's orthogonal array to study the effect of pulse on time, pulse off time, gap voltage, discharge current, wire tension and wire feed on cutting velocity (CV) and surface roughness (SR). Firstly, a series of exploratory experiments has been conducted to identify appropriate gas and wire material based on the values of cutting velocity. After selection of best gas and best wire, they were used for later stage of experiments. Analysis of variances (ANOVA) has been performed to identify significant factors. In order to correlate relationship between process inputs and responses, an adaptive neuro-fuzzy inference system (ANFIS) has been employed to predict the process characteristics based on experimental observation. At the end, an artificial bee colony (ABC) algorithm has been associated with ANFIS models to maximize CV and minimize SR, simultaneously. Then the optimal solutions that obtained through ANFIS-ABC technique have been compared with numbers of confirmatory experiments. Results indicated that oxygen gas and brass wire guarantee superior cutting velocity. Also, according to ANOVA, pulse on time and discharge current were found to have significant effect on CV and SR. In modeling of CV and SR by ANFIS, it was resulted that the proposed method has superiority in prediction of them in the ranges of factors beyond the training condition. Also, association of ANFIS with ABC can find the optimal combination of process parameters accurately according to the confirmatory experiments.     

Sonophotocatalytic Degradation of Chitosan in the Presence of Fe(III)/H2O2 System

The degradation of chitosan by means of ultrasound irradiation and its combination with homogeneous photocatalysis (photo-Fenton) was investigated. Emphasis was given on the effect of additive on degradation rate constants. 24 kHz of ultrasound irradiation was provided by a sonicator, while an ultraviolet source of 16 W was used for UV irradiation. To increase the efficiency of degradation process, degradation system was combined with Fe(III) (2.5 × 10⁻⁴mol/L) and H₂O₂ (0.020–0.118 mol/L) in the presence of UV irradiation and the rate of degradation process change from 1.873 × 10⁻⁹−6.083 × 10⁻⁹ mol^1.7 L s⁻¹. Photo-Fenton process led to complete chitosan degradation in 60 min with the rate increasing with increasing catalyst loading. Sonophotocatalysis in the presence of Fe(III)/H₂O₂ was always faster than the respective individual processes. A synergistic effect between ultrasound and ultraviolet irradiation in the presence of Fenton reagent was calculated. The degraded chitosans were characterized by X-ray diffraction (XRD), gel permeation chromatography (GPC) and Fourier transform infrared (FT-IR) spectroscopy and average molecular weight of ultrasonicated chitosan was determined by measurements of intrinsic viscosity of samples. The results show that the total degree of deacetylation (DD) of chitosan change, partially after degradation and the decrease of molecular weight led to transformation of crystal structure. A negative order for the dependence of the reaction rate on total molar concentration of chitosan solution within the degradation process was suggested. Results of this study indicate that the presence of catalyst in the reaction medium can be utilized to reduce molecular weight of chitosan while maintaining the power of irradiated ultrasound and degree of deacetylation.     

Vertical oil dispersion profile under non-breaking regular waves

An experimental program was conducted to investigate vertical oil dispersion of surface oil spills under non-breaking regular waves. The variation in oil concentration caused by oil dispersion in a water column was studied to determine the vertical oil dispersion profile. The experiments were performed using different waves characteristics for different volumes of oil spill to evaluate the variation in oil concentration at three depths at two sampling stations. The correlations between oil concentration and the main parameters of wave characteristics, oil spill volume, sampling depth, and distance of sampling stations to spill location were assessed. The results revealed that the trend of variation in oil concentration versus wave steepness is linear. The results obtained from experimental measurements indicated that the oil concentrations at mid-depth were 44–77 % and the concentrations near the flume bed were 12–33 % of the concentration near the water surface.     

Pedestrian road crossing behavior (PEROB): Development and psychometric evaluation

Objective: The aim of this study was to develop a theory-based questionnaire to measure road crossing attitudes and potentially risky pedestrian behavior.

Methods: A cross-sectional validation study was carried out on a total sample of 380 young adults aged 18 to 25 years who live in Tehran, Iran. Data were collected from January 27 to May 20, 2015, using a self-administered structured pool of 76 items that was developed from research on the theory of planned behavior. A panel of subject-matter experts evaluated the items for content validity index and content validity ratio, and the questionnaire was pretested. Exploratory factor analysis (EFA) was performed to test construct validity. The Cronbach's alpha coefficient and intraclass correlation coefficient (ICC) analyses were done to assess internal consistency and stability of the scale.

Results: From the initial 76 items, 38 items were found to be appropriate for assessing the pedestrian road crossing behavior (PEROB) of young adults in Tehran. A 9-factor solution revealed an exploratory factor analysis that jointly accounted for 63.8% of the variance observed. Additional analyses also indicated acceptable results for the internal consistency with Cronbach's alpha value ranging from 0.67 to 0.88 and ICC values ranging from 0.64 to 0.96.

Conclusions: This psychometric evaluation of a self-administered instrument resulted in a reliable and valid instrument to assess young adult pedestrians' self-reported road crossing attitudes and behaviors in Tehran. Further development of the instrument is needed to assess its applicability to other road users, particularly older pedestrians.     

An observational study of child safety seat use in an international safe community: Tehran,Iran

Objective: Despite strong evidence of the effectiveness of child safety seats in reducing injuries, the use of these devices in some communities is still rare. The purpose of this study was to determine the prevalence of child safety seat use and the factors influencing its use in the safe community of Tehran.

Methods: This roadside observational study was conducted in 2015 and 2,178 personal cars with a child under 12 years aboard were observed on Tehran's streets in regard to use of child safety seats. Other variables such as the gender of the driver, driver's age group, type of street, region of municipality, time of day, and day of the week were also collected.

Results: Prevalence of child safety seat use was 4.3% and was significantly higher among women drivers, on freeways, and in municipal regions 1, 4, and 7.

Conclusions: The prevalence of child safety seat use in Tehran as a most populous member of the international safe community was very low and most children commuted in insecure situations in the vehicle. Therefore, it is proposed that plans should be made to increase the use of child safety seats in international safe communities.     

Distribution,source apportionment and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in intertidal sediment of Asaluyeh,Persian Gulf

Surface sediment samples were collected from intertidal zone of Asaluyeh, Persian Gulf, to investigate distribution, sources and health risk of sixteen polycyclic aromatic hydrocarbons (PAHs). Total PAH concentrations ranged from 1.8 to 81.2 μg kg^?1 dry weight, which can be categorized as low level of pollution. Qualitative and quantitative assessments showed that PAHs originated from both petrogenic and pyrogenic sources with slight pyrogenic dominance. Source apportionment using principal component analysis indicated that the main sources of PAHs were fossil fuel combustion (33.59%), traffic-related PAHs (32.77%), biomass and coal combustion (18.54%) and petrogenic PAHs (9.31%). According to the results from the sediment quality guidelines, mean effects range-median quotient (M-ERM-Q) and benzo[a]pyrene toxic equivalents (BaP_eq), low negative ecological risks related to PAH compounds would occur in the intertidal zone of Asaluyeh. The total benzo[a]pyrene (BaP) toxic equivalent quotient (TEQ^carc) for carcinogenic compounds ranged from 0.01 to 7 μg kg^?1-BaP_eq, indicating low carcinogenic risk. The human health risk assessment of PAH compounds via ingestion and dermal pathways suggests low and moderate potential risk to human health, respectively.     

A mathematical model to predict the composition and generation of hospital wastes in Iran

The aim of this study is to investigate the quality and quantity of hospital wastes in Iran. The generated hospital wastes have been estimated by the number of hospitals and the number of active beds in each province of Iran in 2001. All data and information have been gathered from: (i) Iran Statistics Center, (ii) literature review, and (iii) hospital waste investigations for an average hospital. Physical analyses have been conducted in terms of various materials (plastic, textile, paper, metal, and others) and components (biological, infectious, medical, and regular wastes). Based on the above-mentioned investigation and information, a mathematical model has been developed to calculate the generation of (infectious) hospital wastes for any desired year. Utilizing the model, generated infectious hospital wastes has been estimated as 698,937 tones for 2008 (short-term) and 3,494,387 tones for 2028 (long-term period). If the real infectious wastes are collected separately, then the generated infectious wastes will be reduced by 15.1% of the above-mentioned amount (139,787 tones for 2008, and 698,877 tones for 2028). Results of physical analysis show the components of the hospital waste as: (a) infectious, 67.3%; (b) medical, 8.8%; (c) biological, 1.8%; and (d) common municipal wastes, 22.1%. An appropriate collection method requires training the staff at hospitals along with preparation of the required facilities. Of course, both of these requirements are cost intensive.