Bioremediation of residual fertilizer nitrate: II. Soil redox potential and soluble iron as indicators of soil health during treatment

The prospect of using wastewater containing high loads of soluble organic matter (OM) for removing residual agricultural chemicals (fertilizer, pesticide, or herbicide) in farm soil, although promising, could have adverse effects on soil agricultural quality as a result of development of redoximorphic features in the soil profile. In this study, the effect of organic carbon supplement for bioremediation of residual fertilizer nitrate on soil properties, redox potential (Eh), pH, and metal ion mobilization was studied using sandy soils packed in columns. The study was included in a general project, described elsewhere (Ugwuegbu et al., 2000), undertaken to evaluate use of controlled water table management (WTM) systems to supply organic carbon for creating a reduced environment conducive to denitrification of residual fertilizer nitrate leaching from the farm to subsurface water. The columns were subjected to subirrigation with water containing soluble organic carbon in the form of glucose. The work was carried out in two experimental setups and the long-term effect of a range of glucose concentrations on the Eh, pH, and soluble levels of Fe and Mn was investigated. From the results obtained, it could be concluded that excessive organic carbon supplement to soil can have adverse effects on soil quality and that Eh and soluble Fe are the two most practical parameters for monitoring soil health during treatment of farm chemicals.     

Contamination of Austrian soil with caesium-137

Austria ranks among the countries that have been most strongly affected by the Chernobyl fallout. The mean contamination with 137Cs is 21.0 kBq/m2, of which 18.7 kBq/m2 is due to the Chernobyl accident, whereas global fallout contributes 2.3 kBq/m2. Maximum values of total 137Cs contamination are nearly 200 kBq/m2. Total deposition of Chernobyl 137Cs on Austrian territory is 1.6 PBq or a fraction of around 2% of the 137Cs released from the reactor. 2115 measurements were used to draw the Austrian "caesium map". The geographical pattern of fallout distribution shows regional differences of contamination as high as 1:100.     

Moderation of dust explosions

Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.

Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.

Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature.     

WASTE WATER DISPOSAL THROUGH A COASTAL AQUIFER1

ABSTRACT: Feasibility of disposing treated sewage in wells sunk into a partially confined coastal limestone aquifer at Waimanalo in the island of Oahu was investigated using an electric analog model. Electric analog modeling was preferred over digital modeling because of ease with which tides could be generated at the ocean boundary in the form of sinusoidal waves. The results of model operation showed that high permeability, low storativity, and the presence of ocean render the Waimanalo aquifer highly suitable for the disposal of waste water in deep wells. Since the quality of water in the aquifer is already unsuitable for municipal, industrial, or agricultural use, waste water injection will not result in any loss of fresh water supply source to the island. It is also believed that the cost of waste water disposal through the aquifer will be considerably less than that through an ocean outfall. During model development it was discovered that electric analog models can help prepare certain graphs which can be useful for aquifer analysis without any further use of the model.     

COMPARISON OF TWO AUTOREGRESSIVE MODELS FOR MONTHLY STREAM FLOW GENERATION1

ABSTRACT: Two autoregressive models for monthly stream flow generation are compared based on the reproduction of the historical record in terms of several important statistics such as the mean, standard deviation, skewness coefficient, correlation coefficient, and the reservoir storage components. In the comparison, both theoretical considerations and practical applications are employed to evaluate the performance of each model.     

WATER QUALITY SIMULATION AND PUBLIC LAW 92–500 Case Study: Southwestern Illinois1

ABSTRACT: Section 208 of the Federal Water Pollution Control Act Amendments of 1972 has provided the Southwestern Illinois Metropolitan and Regional Planning Commission (SIMAPC) with a unique opportunity for comprehensive planning of the region's water quality. SIMAPC initiated the 208 study by researching available technology for the analysis of point and nonpoint sources of pollution and establishing criteria by which to judge the various technniques. This led to SIMAPC'S choice of continuous simulation of stream and reservoir water quality as the most appropriate analytical tool for their needs. A continuous simulation model was calibrated and verified on three basins in the SIMPAC region. It was then used to produce load source analysis, pollution event frequency analysis, and pollution event duration analysis for ten pollutants under existing stream conditions and then under alternative future conditions. These results enabled the weighting of pollutant sources, analysis of the effectiveness of control measures, and quantitative analysis of the marginal benefit of each alternative.     

CADMIUM ACCUMULATION AND TOXICITY IN SUBMERGED PLANT HYDRILLA VERTICILLATA (l.f.) ROYLE

Cadmium accumulation and its toxicity in relation tochlorophyll, protein, cysteine contents and in vivo nitrate reductaseactivity were studied under controlled conditions in Hydrillaverticillata, a submerged commonly occurring macrophyte. Plants weresubjected to six different concentrations of Cd ranging from 1.0 to 25.0 µM for 24, 48, 72 and 168 h. Tissue Cd concentration was maximum (13.71 µmoles/g dw) at 25 µM background concentration. At this concentration, a decrease of approximately 79 and 72% was found in chlorophyll and protein content. In vivo nitrate reductase activity was stimulated at 1.0 µM; however, the activity gradually declined beyond this concentration. Exposure to various cadmium concentrations resulted in an increase in cysteine content of the plant.     

Fluxes and pools of methane in wetland rice soils with varying organic inputs

Measurements of methane emission rates and concentrations in the soil were made during four growing seasons at the International Rice Research Institute in the Philippines, on plots receiving different levels of organic input. Fluxes were measured using the automated closed chambers system (total emission) and small chambers installed between plants (water surface flux). Concentrations of methane in the soil were measured by collecting soil cores including the gas phase (soil-entrapped methane) and by sampling soil solution in situ (dissolved methane). There was much variability between seasons, but total fluxes from plots receiving high organic inputs (16–24 g CH₄ m^–2) always exceeded those from the low input plots (3–9 g CH₄ m^–2). The fraction of the total emission emerging from the surface water (presumably dominated by ebullition) was greater during the first part of the season, and greater from the high organic input plots (35–62%) than from the low input plots (15–23%). Concentrations of dissolved and entrapped methane in the low organic input plots increased gradually throughout the season; in the high input plots there was an early-season peak which was also seen in emissions. On both treatments, periods of high methane concentrations in the soil coincided with high rates of water surface flux whereas low concentrations of methane were generally associated with low flux rates.     

Spore inhibition-based enzyme substrate assay for monitoring of aflatoxin M1 in milk

A spore germination-based concept and its transformation into a field level prototype for monitoring aflatoxin M₁ (AFM₁) in milk was developed. Initially, 15 strains of Bacillus spp. procured from different culture collection were screened for AFM₁ sensitivity using spot assay and marker strain showing inhibition at 0.5 ppb was selected based upon maximum zone of inhibition. The selected strain B. megaterium 2949 was further screened for different enzymes activities and subsequently its spores were produced to an extent of 73.13% ± 3.197% in newly developed sporulation medium containing beef extract (0.0075% ± 0.0004%), yeast extract (0.015% ± 0.001%), peptone (0.0375% ± 0.0016%), and sodium chloride (0.0375% ± 0.0018%). A spore germination-based concept/ assay was optimized by immobilizing spores in eppendorf with pretreated milk (80°C/15 min) containing germinant and chromogenic substrate followed by incubation at 37°C. The appearance of sky blue color within real time of 45 min indicated spores germination and release of specific marker enzyme such as acetyl esterase and its specific action on chromogenic substrate which demonstrates absence of AFM₁ in milk. However, if there was no color change, presence of AFM₁ at 0.5 ppb MRL was denoted by Codex. The developed concept on AFM₁ detection was validated and a correlation of 0.97 was established with AOAC approved Charm 6602 and ELISA at Codex MRL with minimal false positive and negative results. The cost effective test has potential application in dairy farms, manufacturing, and R&D units for routine monitoring of AFM₁ in milk.