Relation between PAH and black carbon contents in size fractions of Norwegian harbor sediments

Distributions of total organic carbon (TOC), black carbon (BC), and polycyclic aromatic hydrocarbons (PAH) were investigated in different particle size fractions for four Norwegian harbor sediments. The total PAH (16-EPA) concentrations ranged from 2 to 113 mg/kg dry weight with the greatest fraction of PAH mass in the sand fraction for three of the four sediments. TOC contents ranged from 0.84% to 14.2% and BC contents from 0.085% to 1.7%. This corresponds to organic carbon (OC = TOC - BC) contents in the range of 0.81-14% and BC:TOC ratios of 1.3-18.1%. PAH isomer ratios suggested that the PAH in all four sediments were of pyrogenic origin. Furthermore, stronger correlations between PAH versus BC (r2 = 0.85) than versus OC (r2 = 0.15) were found. For all size fractions and bulk sediments, the PAH-to-BC ratios for the total PAHs were on average 6+/-3 mg PAH/g BC. These results suggest that PAH distributions were dominated by the presence of BC, rather than OC. As sorption to BC is much stronger than sorption to OC, this may result in significantly lower dissolved concentrations of PAH than expected on the basis of organic carbon partitioning alone.     

Evaluation of Risk from Using Poultry Litter to Remediate and Reuse Contaminated Estuarine Sediments

The availability of heavy metals in contaminated sediment evaluated for beneficial reuse, before and after chemical amendment, was evaluated using poultry manure as the amendment. The dredged sediment was only slightly contaminated with heavy metals. Availability tests on the amended sediment showed an increase in heavy metals, most likely because of poultry feed amendments passed to the manure. There would be difficulty finding one chemical amendment to reduce the availability of a number of heavy metals because the metals exhibit different chemical properties. © 2001 John Wiley & Sons, Inc.     

A Heuristic Method for Determining Changes of Source Loads to Comply with Water Quality Limits in Catchments

A common land and water management task is to determine where and by how much source loadings need to change to meet water quality limits in receiving environments. This paper addresses the problem of quantifying changes in loading when limits are specified in many locations in a large and spatially heterogeneous catchment, accounting for cumulative downstream impacts. Current approaches to this problem tend to use either scenario analysis or optimization, which suffer from difficulties of generating scenarios that meet the limits, or high complexity of optimization approaches. In contrast, we present a novel method in which simple catchment models, load limits, upstream/downstream spatial relationships and spatial allocation rules are combined to arrive at source load changes. The process iteratively establishes the critical location (river segment or lake) where the limits are most constraining, and then adjusts sources upstream of the critical location to meet the limit at that location. The method is demonstrated with application to New Zealand (268,000 km2) for nutrients and the microbial indicator E. coli, which was conducted to support policy development regarding water quality limits. The model provided useful insights, such as a source load excess (the need for source load reduction) even after mitigation measures are introduced in order to comply with E. coli limits. On the other hand, there was headroom (ability to increase source loading) for nutrients. The method enables assessment of the necessary source load reductions to achieve water quality limits over broad areas such as large catchments or whole regions.     

Demography of central and marginal populations of monkeyflowers (Mimulus cardinalis and M. lewisii)

Every species occupies a limited geographic area, but how spatiotemporal environmental variation affects individual and population fitness to create range limits is not well understood. Because range boundaries arise where, on average, populations are more likely to go extinct than to persist, range limits are an inherently population-level problem for which a demographic framework is useful. In this study, I compare demographic parameters and population dynamics between central and marginal populations of monkeyflowers, Mimulus cardinalis and M. lewisii, along an elevation gradient spanning both species' ranges. Central and marginal populations of both species differed in survival and fecundity. For M. lewisii, these components of fitness were higher in central than in marginal populations, but for M. cardinalis the converse was true. To assess spatiotemporal variation in population dynamics, I used transition matrix models to estimate asymptotic population growth rates (lambda) and found that population growth rates of M. lewisii were highest at the range center and reduced at the range margin. Population growth rates of M. cardinalis were highest at the range margin and greatly reduced at the range center. Life table response analysis decomposed spatiotemporal variation in lambda into contributions from each transition between life stages, finding that transitions from large nonreproductive and reproductive plants to the seed class and stasis in the reproductive class made the largest contributions to spatial differences in lambda. These transitions had only low to moderate sensitivities, indicating that differences in projected population growth rates resulted mainly from observed differences in transition matrix parameters and their underlying vital rates.     

Local vs. national: Epidemiology of pedestrian injury in a mid-Atlantic city

Objective: Understanding pedestrian injury trends at the local level is essential for program planning and allocation of funds for urban planning and improvement. Because we hypothesize that local injury trends differ from national trends in significant and meaningful ways, we investigated citywide pedestrian injury trends to assess injury risk among nationally identified risk groups, as well as identify risk groups and locations specific to Baltimore City.

Methods: Pedestrian injury data, obtained from the Baltimore City Fire Department, were gathered through emergency medical services (EMS) records collected from January 1 to December 31, 2014. Locations of pedestrian injuries were geocoded and mapped. Pearson's chi-square test of independence was used to investigate differences in injury severity level across risk groups. Pedestrian injury rates by age group, gender, and race were compared to national rates.

Results: A total of 699 pedestrians were involved in motor vehicle crashes in 2014—an average of 2 EMS transports each day. The distribution of injuries throughout the city did not coincide with population or income distributions, indicating that there was not a consistent correlation between areas of concentrated population or concentrated poverty and areas of concentrated pedestrian injury. Twenty percent (n = 138) of all injuries occurred among children age ≤14, and 22% (n = 73) of severe injuries occurred among young children. The rate of injury in this age group was 5 times the national rate (Incident Rate Ratio [IRR] = 4.81, 95% confidence interval [CI], [4.05, 5.71]). Injury rates for adults ≥65 were less than the national average.

Conclusions: As the urban landscape and associated pedestrian behavior transform, continued investigation of local pedestrian injury trends and evolving public health prevention strategies is necessary to ensure pedestrian safety.     

Enhanced styrene recovery from waste polystyrene pyrolysis using response surface methodology coupled with Box–Behnken design

A work applied response surface methodology coupled with Box–Behnken design (RSM-BBD) has been developed to enhance styrene recovery from waste polystyrene (WPS) through pyrolysis. The relationship between styrene yield and three selected operating parameters (i.e., temperature, heating rate, and carrier gas flow rate) was investigated. A second order polynomial equation was successfully built to describe the process and predict styrene yield under the study conditions. The factors identified as statistically significant to styrene production were: temperature, with a quadratic effect; heating rate, with a linear effect; carrier gas flow rate, with a quadratic effect; interaction between temperature and carrier gas flow rate; and interaction between heating rate and carrier gas flow rate. The optimum conditions for the current system were determined to be at a temperature range of 470–505 °C, a heating rate of 40 °C/min, and a carrier gas flow rate range of 115–140 mL/min. Under such conditions, 64.52% WPS was recovered as styrene, which was 12% more than the highest reported yield for reactors of similar size. It is concluded that RSM-BBD is an effective approach for yield optimization of styrene recovery from WPS pyrolysis.     

Treatment of polychlorinated biphenyls in two surface soils using catalyzed H₂O₂ propagations

Two surface soils contaminated with polychlorinated biphenyls (PCBs) collected from Superfund sites in the New England region of the United States, Fletcher Paints and Merrimack Industrial Metals, were evaluated for field treatment at the bench level using catalyzed H₂O₂ propagations (CHP—modified Fenton’s reagent). The two soils were first evaluated for the potential for in situ treatment based on two criteria: (1) temperature (<40 °C after CHP reagent addition), and (2) hydrogen peroxide longevity (>24 h). In situ CHP remediation was more applicable to the Fletcher soil, while the Merrimack soil was better suited to ex situ treatment based on temperature increases and hydrogen peroxide lifetimes. Using the highest hydrogen peroxide concentrations appropriate for in situ treatment in each soil, PCB destruction was 94% in the Fletcher soil but only 48% in the Merrimack soil. However, 98% PCB destruction was achieved in the Merrimack soil using conditions more applicable to ex situ treatment (higher hydrogen peroxide concentrations with temperatures >40 °C). Analysis of degradation products by gas chromatography/mass spectroscopy showed no detectable chlorinated degradation products, suggesting that the products of PCB oxidation were rapidly dechlorinated and degraded. The results of this research document that the two PCB-contaminated soils studied can be effectively treated using aggressive CHP conditions, and that such a detailed bench study provides important information before implementing field treatment.     

Green chemistry

A grand challenge facing government, industry, and academia in the relationship of our technological society to the environment is reinventing the use of materials. To address this challenge, collaboration from an interdisciplinary group of stakeholders will be necessary. Traditionally, the approach to risk management of materials and chemicals has been through inerventions intended to reduce exposure to materials that are hazardous to health and the environment. In 1990, the Pollution Prevention Act encouraged a new tact-elimination of hazards at the source. An emerging approach to this grand challenge seeks to embed the diverse set of environmental perspectives and interests in the everyday practice of the people most responsible for using and creating new materials—chemists. The approach, which has come to be known as Green Chemistry, intends to eliminate intrinsic hazard itself, rather than focusing on reducing risk by minimizing exposure. This chapter addresses the representation of downstream environmental stakeholder interests in the upstream everyday practice that is reinventing chemistry and its material inputs, products, and waste as described in the “12 Principles of Green Chemistry”.     

Effect of pH on surface characteristics of switchgrass-derived biochars produced by fast pyrolysis

Surface properties of switchgrass-derived biochars produced at fast pyrolysis temperatures of 450, 600 and 800 °C were characterized at different solution pHs in order to determine the structural and chemical changes of artificially-weathered biochars when incorporated into soil. As biochars were acidified from pH 7 to 3, crystalline minerals dissolved slowly releasing nutrients; however, residual minerals were still detected in biochars produced at higher pyrolysis temperatures after pH treatment. Moreover, the amount of exchangeable bases and other inorganic compounds released from the biochars increased when pH decreased. As minerals dissolved from the biochars, total surface area and pore volume were found to increase. Surface functional groups and water vapor adsorption capacity at 0.8 P/P_o also increased, whereas the potential CEC of biochars decreased due to the replacement of exchangeable sites by hydrogen ion. Therefore, during the aging process, it is predicted that soil-incorporated biochars will slowly release nutrients with changes in surface functionality and porosity, which are expected to enhance water holding capacity of soil and provide a beneficial habitat for microbial colonization.     

Inactivation of Ascaris suum in a biodrying compost system

Pathogen contamination of waterways is a serious concern in dairy farming areas where livestock waste is applied to agricultural fields. As an alternative, a biodrying composting system dries collected livestock waste, reduces the strong odors, and has been proposed as a means of reducing, and even eliminating pathogens present in the waste. Therefore, the survival of pathogens in a biodrying composting system was investigated. Dairy farm livestock waste was piled in a biodrying storage shed where forced aeration and natural decomposition processes heated a major portion of the waste pile to temperatures exceeding 55 degrees C. Ascaris suum eggs were used as the surrogate species and inoculated into special chambers and placed at three different elevations at different intervals along the length of the pile. Control chambers were stored in water at 4 degrees C in the laboratory. Both compost and control chambers were removed at Day 4, 8, 12, 16, and 20. The eggs were extracted from the chamber medium and analyzed for viability. No viable eggs were recovered from any of the chambers removed from the compost pile, while >or=90% viability was observed in the control chambers. High temperatures and continued drying were the major contributing factors to the inactivation of the helminth eggs. The complete inactivation of A. suum eggs by the biodrying process encourages the storage and treatment of manure to high temperatures and reduced moisture conditions before field spreading to reduce the risk of harmful pathogens contaminating waterways and potential drinking water supplies.