Evaluation of metabisulfite and a commercial steel wool for removing chromium(VI) from wastewater

Efficiency of metabisulfite and a commercial steel wool as reducing agents in the removal of Cr(VI) from wastewaters was evaluated. Chromium(VI) was converted to Cr(III), precipitated with NaOH, and removed by filtration. A reduction of more than 1.0 × 10⁵ and 4.0 × 10⁵ fold in total Cr and the Cr(VI) concentrations, respectively, was observed by employing steel wool masses as low as 0.4420 g to 30-mL solutions of wastewater. Chromium(III) hydroxide obtained after the treatment was recycled and used as marker in cattle nutrition studies. The liquid residue obtained after the treatment was reused as precipitation agent replacing NaOH.     

Recycling glass-polishing sludge and aluminum anodising sludge in polyurethane and cement composites: fire performance and mechanical properties

Journal of Material Cycles and Waste Management - This article aims to study the mechanical strength and fire resistance of polyurethane/cement (PuCem) composites containing glass sludge and sludge...     

Assessment of Self-Organizing Map artificial neural networks for the classification of sediment quality

The application of mathematical tools in initial steps of sediment quality assessment frameworks can be useful to provide an integrated interpretation of multiple measured variables. This study reveals that the Self-Organizing Map (SOM) artificial neural network can be an effective tool for the integration of multiple physical, chemical and ecotoxicological variables in order to classify different sites under study according to their similar sediment quality. Sediment samples from 40 sites of 3 estuaries of Cantabria (Spain) were classified with respect to 13 physical, chemical and toxicological variables using the SOM. Results obtained with the SOM, when compared to those of traditional multivariate statistical techniques commonly used in the field of sediment quality (principal component analysis (PCA) and hierarchical cluster analysis (HCA)), provided a more useful classification for further assessment steps. Especially, the powerful visualization tools of the SOM, which offer more information and in an easier way than HCA and PCA, facilitate the task of establishing an order of priority between the distinguished groups of sites depending on their need for further investigations or remediation actions in subsequent management steps.     

Solid waste management in European countries: a review of systems analysis techniques

In the past few decades, solid waste management systems in Europe have involved complex and multi-faceted trade-offs among a plethora of technological alternatives, economic instruments, and regulatory frameworks. These changes resulted in various environmental, economic, social, and regulatory impacts in waste management practices which not only complicate regional policy analysis, but also reshape the paradigm of global sustainable development. Systems analysis, a discipline that harmonizes these integrated solid waste management strategies, has been uniquely providing interdisciplinary support for decision making in this area. Systems engineering models and system assessment tools, both of which enrich the analytical framework of waste management, were designed specifically to handle particular types of problems. Though how to smooth out the barriers toward achieving appropriate systems synthesis and integration of these models and tools to aid in the solid waste management schemes prevalent in European countries still remains somewhat uncertain. This paper conducts a thorough literature review of models and tools illuminating possible overlapped boundaries in waste management practices in European countries and encompassing the pros and cons of waste management practices in each member state of the European Union. Whereas the Southern European Union (EU) countries need to develop further measures to implement more integrated solid waste management and reach EU directives, the Central EU countries need models and tools with which to rationalize their technological choices and management strategies. Nevertheless, considering systems analysis models and tools in a synergistic way would certainly provide opportunities to develop better solid waste management strategies leading to conformity with current standards and foster future perspectives for both the waste management industry and government agencies in European Union.     

All clear? Meerkats attend to contextual information in close calls to coordinate vigilance

Socio-demographic factors, such as group size and their effect on predation vulnerability, have, in addition to intrinsic factors, dominated as explanations when attempting to understand animal vigilance behaviour. It is generally assumed that animals evaluate these external factors visually; however, many socially foraging species adopt a foraging technique that directly compromises the visual system. In these instances, such species may instead rely more on the acoustical medium to assess their relative risk and guide their subsequent anti-predator behaviour. We addressed this question in the socially foraging meerkat (Suricata suricatta). Meerkats forage with their head down, but at the same time frequently produce close calls (‘Foraging’ close calls). Close calls are also produced just after an individual has briefly scanned the surrounding environment for predators (‘Guarding’ close calls). Here, we firstly show that these Guarding and Foraging close call variants are in fact acoustically distinct and secondly subjects are less vigilant (in terms of frequency and time) when exposed to Guarding close call playbacks than when they hear Foraging close calls. We argue that this is the first evidence for socially foraging animals using the information encoded within calls, the main adaptive function of which is unrelated to immediate predator encounters, to coordinate their vigilance behaviour. In addition, these results provide new insights into the potential cognitive mechanisms underlying anti-predator behaviour and suggest meerkats may be capable of signalling to group members the ‘absence’ of predatory threat. If we are to fully understand the complexities underlying the coordination of animal anti-predator behaviour, we encourage future studies to take these additional auditory and cognitive dimensions into account.     

Surveying drainage culvert use by carnivores: sampling design and cost�Cbenefit analyzes of track-pads vs. video-surveillance methods

Environmental assessment studies often evaluate the effectiveness of drainage culverts as habitat linkages for species, however, the efficiency of the sampling designs and the survey methods are not known. Our main goal was to estimate the most cost-effective monitoring method for sampling carnivore culvert using track-pads and video-surveillance. We estimated the most efficient (lower costs and high detection success) interval between visits (days) when using track-pads and also determined the advantages of using each method. In 2006, we selected two highways in southern Portugal and sampled 15 culverts over two 10-day sampling periods (spring and summer). Using the track-pad method, 90% of the animal tracks were detected using a 2-day interval between visits. We recorded a higher number of crossings for most species using video-surveillance (n = 129) when compared with the track-pad technique (n = 102); however, the detection ability using the video-surveillance method varied with type of structure and species. More crossings were detected in circular culverts (1 m and 1.5 m diameter) than in box culverts (2 m to 4 m width), likely because video cameras had a reduced vision coverage area. On the other hand, carnivore species with small feet such as the common genet Genetta genetta were detected less often using the track-pad surveying method. The cost-benefit analyzes shows that the track-pad technique is the most appropriate technique, but video-surveillance allows year-round surveys as well as the behavior response analyzes of species using crossing structures.     

Occupational accidents model based on risk–injury affinity groups

This article sets outs a generalized utility model for the diagnosis and prediction of accidents among the Spanish workforce. Based on observational data classified into a risk–injury contingency table (19 × 19), we have summarized the accident rate of all Spanish companies over an 11-year period (75,19,732 accidents). By using correspondence analysis a structure composed of three axes can be obtained, the combination of which identifies three separate risk and injury groups, which we use as a general Spanish pattern. The relationships of greater affinity or likelihood amongst the risks and injuries identified in the pattern facilitate decision-making at the risk-assessment stage in Spanish companies. Each risk–injury group has its own characteristics, interpretable within the phenomenological framework of the accident.The main advantage of this model is its potential application to any other country and the feasibility of contrasting results from different countries. One limiting factor, however, is that the model currently lacks a common classification frame for risks and injuries which would enhance this contrast. The aim of this model is to automatically manage work-related accidents at a national level.     

Development of a sampling method for the simultaneous monitoring of straight-chain alkanes, straight-chain saturated carbonyl compounds and monoterpenes in remote areas

Studies have shown that biogenic compounds, long chain secondary compounds and long lifetime anthropogenic compounds are involved in the formation of organic aerosols in both polluted areas and remote places. This work aims at developing an active sampling method to monitor these compounds (i.e. 6 straight-chain saturated aldehydes from C6 to C11; 8 straight-chain alkanes from C9 to C16; 6 monoterpenes: α-pinene, β-pinene, camphene, limonene, α-terpinene, & γ-terpinene; and 5 aromatic compounds: toluene, ethylbenzene, meta-, para- and ortho-xylenes) in remote areas. Samples are collected onto multi-bed sorbent cartridges at 200 mL min(-1) flow rate, using the automatic sampler SyPAC (TERA-Environnement, Crolles, France). No breakthrough was observed for sampling volumes up to 120 L (standard mixture at ambient temperature, with a relative humidity of 75%). As ozone has been shown to alter the samples (losses of 90% of aldehydes and up to 95% of terpenes were observed), the addition of a conditioned manganese dioxide (MnO(2)) scrubber to the system has been validated (full recovery of the affected compounds for a standard mixture at 50% relative humidity--RH). Samples are first thermodesorbed and then analysed by GC/FID/MS. This method allows suitable detection limits (from 2 ppt for camphene to 13 ppt for octanal--36 L sampled), and reproducibility (from 1% for toluene to 22% for heptanal). It has been successfully used to determine the diurnal variation of the target compounds (six 3 h samples a day) during winter and summer measurement campaigns at a remote site in the south of France.     

Optical fiber based methodology for assessment of thiocyanate in seawater

A new methodology for the assessment of thiocyanate (SCN(-)) is proposed based on optical fiber (OF) detection coupled to a liquid chromatography system (LC). The developed methodology showed an adequate performance for the analysis of SCN(-) comparable to a high performance liquid chromatography with UV detector (HPLC-UV) methodology: a detection limit of 3 μg L(-1), a linear range from 4 to 400 μg L(-1), and an analytical time of less than 6 min. The OF based methodology was of compact design and easy operation. This simple system has the potential to be used as a sensing approach for SCN(-) in seawater.     

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.