Dynamic evaluation of a regional air quality model: Assessing the emissions-induced weekly ozone cycle

Air quality models are used to predict changes in pollutant concentrations resulting from envisioned emission control policies. Recognizing the need to assess the credibility of air quality models in a policy-relevant context, we perform a dynamic evaluation of the Community Multiscale Air Quality (CMAQ) modeling system for the “weekend ozone effect” to determine if observed changes in ozone due to weekday-to-weekend (WDWE) reductions in precursor emissions can be accurately simulated. The weekend ozone effect offers a unique opportunity for dynamic evaluation, as it is a widely documented phenomenon that has persisted since the 1970s. In many urban areas of the Unites States, higher ozone has been observed on weekends than weekdays, despite dramatically reduced emissions of ozone precursors (nitrogen oxides [NO_x] and volatile organic compounds [VOCs]) on weekends. More recent measurements, however, suggest shifts in the spatial extent or reductions in WDWE ozone differences. Using 18 years (1988–2005) of observed and modeled ozone and temperature data across the northeastern United States, we re-examine the long-term trends in the weekend effect and confounding factors that may be complicating the interpretation of this trend and explore whether CMAQ can replicate the temporal features of the observed weekend effect. The amplitudes of the weekly ozone cycle have decreased during the 18-year period in our study domain, but the year-to-year variability in weekend minus weekday (WEWD) ozone amplitudes is quite large. Inter-annual variability in meteorology appears to influence WEWD differences in ozone, as well as WEWD differences in VOC and NO_x emissions. Because of the large inter-annual variability, modeling strategies using a single episode lasting a few days or a few episodes in a given year may not capture the WEWD signal that exists over longer time periods. The CMAQ model showed skill in predicting the absolute values of ozone concentrations during the daytime. However, early morning NO_x concentrations were underestimated and ozone levels were overestimated. Also, the modeled response of ozone to WEWD differences in emissions was somewhat less than that observed. This study reveals that model performance may be improved by (1) properly estimating mobile source NO_x emissions and their temporal distributions, especially for diesel vehicles; (2) reducing the grid cell size in the lowest layer of CMAQ; and, (3) using time-dependent and more realistic boundary conditions for the CMAQ simulations.     

Particulate matter sources on an hourly timescale in a rural community during the winter

Particulate matter (PM) sources at four different monitoring sites in Alexandra, New Zealand, were investigated on an hourly timescale. Three of the sites were located on a horizontal transect, upwind, central, and downwind of the general katabatic flow pathway. The fourth monitoring site was located at the central site, but at a height of 26 m, using a knuckleboom, when wind conditions permitted. Average hourly PM₁₀ (PM with an aerodynamic diameter <10 μm) concentrations in Alexandra showed slightly different diurnal profiles depending on the sampling site location. Each location did, however, feature a large evening peak and smaller morning peak in PM₁₀ concentrations. The central site in Alexandra experienced the highest PM₁₀ concentrations as a result of PM transport along a number of katabatic flow pathways. A significant difference in PM₁₀ concentrations between the central and elevated sites indicated that a shallow inversion layer formed below the elevated site, limiting the vertical dispersion of pollutants. Four PM₁₀ sources were identified at each of the sites: biomass combustion, vehicles, crustal matter, and marine aerosol. Biomass combustion was identified as the most significant source of PM₁₀, contributing up to 91% of the measured PM₁₀. Plots of the average hourly source contributions to each site revealed that biomass combustion was responsible for both the evening and morning peaks in PM₁₀ concentrations observed at each of the sites, suggesting that Alexandra residents were relighting their fires when they rose in the morning. The identification of PM sources on an hourly timescale can have significant implications for air quality management.

Implications: Monitoring the sources of PM₁₀ on an hourly timescale at multiple sites within an airshed provides extremely useful information for air quality management. Sources responsible for observed peaks in measured diurnal PM₁₀ concentration profiles can be easily identified and targeted for reduction. Also, hourly PM₁₀ sampling can provide crucial information on the role meteorology plays in the development of elevated PM₁₀ concentrations.     

Evaluation of the vulnerability to contamination of drinking water systems for rural regions in Québec,Canada

The aim of this paper is to describe a method for evaluating the vulnerability of drinking water systems to contamination, in particular in rural regions used intensively for agriculture. To do so, various indicators were developed to represent the source to tap multi-barrier approach for drinking water safety. These indicators correspond to four barriers: source susceptibility to contamination; water treatment efficiency; distribution system management; and, overall management of water quality. The indicators were classified, regrouped and weighted within a model based on a multi-criteria analysis. The method was developed and applied to 39 municipal water systems of rural Quebec, Canada. The model obtained can be used for planning purposes to prioritise water systems requiring improvements.     

The pH-dependent adsorption of tributyltin to charcoals and soot

Widespread use of tributyltin (TBT) poses a serious environmental problem. Adsorption by black carbon (BC) may strongly affect its behavior. The adsorption of TBT to well characterized soot and two charcoals with specific surface area in the range of 62-111 m² g⁻¹ have been investigated with main focus on pH effects. The charcoals but not soot possess acidic functional groups. TBT adsorption reaches maximum at pH 6-7 for charcoals, and at pH > 6 for soot. Soot has between 1.5 and 15 times higher adsorption density (0.09-1.77 μmol m⁻²) than charcoals, but charcoals show up to 17 times higher sorption affinities than soot. TBT adsorption is successfully described by a new pH-dependent dual Langmuir model considering electrostatic and hydrophobic adsorption, and pH effects on TBT speciation and BC surface charge. It is inferred that strong sorption of the TBTOH species to BC may affect TBT toxicity.     

Studies of corrosion tendency of drinking water in the distribution system at the University of Benin

Ensemble of corrosion indices was combined to study the corrosion tendency of the drinking water supply at the University of Benin, Nigeria. The experimental results were analysed in terms of three corrosion indices-Langelier Index, Ryznar Index and Larson–Skold Index. According to the evaluation, the Langelier Index ranged from −5.569 to −3.684, Ryznar Index was between 13.340 and 16.418 while the Larson–Skold Index was between 1.191 and 31.750. Results indicated that the water may be corrosive. A regression of these indices on iron concentration (ppm) showed that Langelier Index, Ryznar Index and Larson–Skold Index have R ² of 0.5868, 0.6577 and 0.7063, respectively. The positive correlation between iron levels and the corrosion indices suggested that iron levels were directly related to increase in corrosion tendency.     

Hyperaccumulation of Pb, Zn and Cd in herbaceous grown on lead-zinc mining area in Yunnan, China

A field survey of herbaceous growing on lead-zinc mining area in Yunnan, China were conducted to identify species accumulating exceptionally large concentrations of Pb, Zn and Cd in shoots. In total, 220 plant samples of 129 species of 50 families and 220 soil samples in which the plants were growing were collected. According to accumulation concentration in plant shoots and the concentration time levels compared to plants from non-polluted environments, 21 plant samples of 16 species were chosen as best-performing specimens, 11 plant samples of 10 species for Pb, 5 plant samples of 4 species for Zn and 5 plant samples of 5 species for Cd. Sonchus asper (L.) Hill in Qilinkeng had hyperaccumulation capacity to Pb and Zn. Corydalis pterygopetala Franch in Paomaping had hyperaccumulation capacity to Zn and Cd. All 5 Cd hyperaccumulators came from Lanping lead-zinc mining area. Out of 11 Pb hyperaccumulators, 7 came from Minbingying of Huice lead-zinc mining area. The average of the concentration time levels compared to plants from non-polluted environments were higher than 10 times in all plant samples, the concentration time levels changed from 203 times to 620 times for Pb, from 50 times to 70 times for Zn and from 145 times to 330 times for Cd. Out of 21 plant samples, translocation factor changed from 0.35 to 1.90, only translocation factor of 7 plant samples were higher than 1. Enrichment coefficients of all samples were lower than 1. These plant species were primarily heavy metal hyperaccumulator, and will be used in phytoremediation of the metallic pollutants in soils after further research in accumulation mechanism.     

Well-designed environmental regulation and firm performance: Swedish evidence on the Porter hypothesis and the effect of regulatory time strategies

Using recent data on a cross-section of Swedish chemical and pulp and paper firms, this paper provides novel empirical insights into the Porter hypothesis. Well-designed environmental regulation can stimulate firms’ innovative capabilities, while at the same time generating innovation offsets that may both offset net compliance costs and yield a competitive edge over those firms that are not affected by such regulations. In doing so, we also test the alleged effectiveness of regulatory time strategies in stimulating innovation activities of regulated firms. We find evidence for the effectiveness of such well-designed regulations: announced rather than existing regulation induces innovation and some innovation offsets. Our results imply that empirical tests of the Porter hypothesis that do not account for its dynamic nature, and that do not measure well-designed regulations, might provide misleading conclusions as to its validity.     

Regulatory failure and the polluter pays principle: why regulatory impact assessment dominates the polluter pays principle

Environmental Economics and Policy Studies - This paper shows possible inconsistencies in environmental law, in which regulatory impact assessment (RIA) and the polluter pays principle (PPP)...     

Crystalline phase analysis and phosphorus availability after thermochemical treatment of sewage sludge ash with sodium and potassium sulfates for fertilizer production

Phosphorus rich sewage sludge ash is a promising source to produce phosphorus recycling fertilizer. However, the low plant availability of phosphorus in these ashes makes a treatment necessary. A thermochemical treatment (800–1000 °C) with alkali additives transforms poorly plant available phosphorus phases to highly plant available calcium alkali phosphates (Ca,Mg)(Na,K)PO₄. In this study, we investigate the use of K₂SO₄ as additive to produce a phosphorus potassium fertilizer in laboratory-scale experiments (crucible). Pure K₂SO₄ is not suitable as high reaction temperatures are required due to the high melting point of K₂SO₄. To overcome this barrier, we carried out series of experiments with mixtures of K₂SO₄ and Na₂SO₄ resulting in a lower economically feasible reaction temperature (900–1000 °C). In this way, the produced phosphorus potassium fertilizers (8.4 wt.% K, 7.6 wt.% P) was highly plant available for phosphorus indicated by complete extractable phosphorus in neutral ammonium citrate solution. The added potassium is, in contrast to sodium, preferably incorporated into silicates instead of phosphorus phases. Thus, the highly extractable phase (Ca,Mg)(Na,K)PO₄ in the thermochemical products contain less potassium than expected. This preferred incorporation is confirmed by a pilot-scale trial (rotary kiln) and thermodynamic calculation.