Geospatial technology for assessment of soil erosion and prioritization of watersheds using RUSLE model for lower Sutlej sub-basin of Punjab,India

Environmental Science and Pollution Research - Erosion of soil by water coupled with human activities is considered as one of the...     

Markers of oxidative stress and toxicant exposure among young waterpipe smokers in the USA

Waterpipe (aka hookah) tobacco smokers are exposed to toxicants that can lead to oxidative DNA and RNA damage, a precursor to chronic disease formation. This study assessed toxicant exposure and biomarkers of DNA [8-oxo-7, 8-dihydro-2′-deoxyguanosine (8-oxodG)] and RNA [8-oxo-7,8-dihydroguanosine (8-oxoGuo)] oxidative damage during smoking of flavored and non-flavored waterpipe tobacco. Thirty waterpipe smokers completed two counterbalanced 2-h lab waterpipe smoking sessions (flavored vs. non-flavored waterpipe tobacco). Urinary concentrations of 8-oxodG and 8-oxoGuo and expired carbon monoxide (eCO) were measured before and after the smoking sessions. A significant increase in the urinary concentrations of 8-oxodG (from 2.12 ± 0.83 to 2.35 ± 0.91 ng/mg creatinine, p = 0.024) and 8-oxoGuo (from 2.96 ± 0.84 to 3.45 ± 0.76 ng/mg creatinine, p = 0.003) were observed after smoking the non-flavored and flavored waterpipe tobacco, respectively. Our results also showed that the mean ± SD of eCO increased significantly after smoking the flavored (from 1.3 ± 1.1 to 20.3 ± 23.6 ppm, p < 0.001) and non-flavored waterpipe tobacco (from 1.8 ± 1.2 to 24.5 ± 26.1 ppm, p < 0.001). There were no significant differences in the means of 8-oxodG (p = 0.576), 8-oxoGuo (p = 0.108), and eCO (p = 0.170) between the flavored and non-flavored tobacco sessions. Smoking non-flavored and flavored waterpipe tobacco leads to oxidative stress and toxicant exposure. Our findings add to the existing evidence about the adverse effects of waterpipe tobacco smoking (WTS) and the need for strong policies to inform and protect young people from the risks of WTS.

     

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Tool life has been a vital issue in machining titanium alloys. Recently, an atomization-based cutting fluid (ACF) application has been found to be an effective approach for cooling and lubrication in micromachining operations. In this study, an ACF spray system is developed for macro-scale turning of Ti–6Al–4V. The spray system is designed to minimize interaction between the fluid droplets, and the gas nozzle to control the divergence of the fluid droplets. Experiments are conducted to study the effect of five specific ACF spray parameters including fluid flow rate, spray distance, impingement angle, and type and pressure level of the droplet carrier gas on cutting forces, tool life, and chip characteristics. It has been observed that the combination of lower pressure (150 psi) air-mixed CO₂ with a higher flow rate (20 ml/min) and a larger spray distance (35 mm) produces a significantly longer tool life and broken chips. The results also reveal that the ACF spray system can extend tool life up to 40–50% over flood cooling.     

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Financing for innovative technologies and best practices to reduce persistent organic pollutants

Persistent Organic Pollutants (POPs) threaten human health and the global environment. Recognizing their dangers many countries began to limit or ban POPs production, use, and release in the 1990s. Eventually the Stockholm Convention on POPs, was adopted in 2001 and entered into force in 2004. The Global Environment Facility (GEF) provides financial support to developing country Parties for the implementation of the Stockholm Convention. The GEF’s POPs investment portfolio focuses on: 1) strengthening the capacity of developing country Parties to implement the Stockholm Convention; 2) establishing and supporting partnerships to develop and implement National Implementation Plans (NIPs), and 3) demonstrating and deploying best technologies and practices to reduce POPs emission, including development of safe alternatives. Since 2001 the GEF has committed US$568.8 million to POPs projects and leveraged some US$1474.5 million in co-financing from partners in the public and private sectors, bringing the total value of the GEF POPs portfolio to over US$2 billion. With GEF support, 108 developing country Parties have developed their NIPs. The GEF also financed 109 projects for the implementation of the Convention. Upon completion, these GEF POPs investments will contribute to the disposal of more than 70,000 tons of Polychlorinated Biphenyls (PCBs) oil, contaminated equipments, and waste, more than 40,000 tons of obsolete POPs pesticides and associated waste, and reducing dioxin/furan and mercury emission by introducing environmentally sound technologies and best practices. This paper summarizes: 1) direct and indirect GEF investments to support the goals of the Stockholm Convention; 2) investment case studies on PCB, DichloroDiphenylTrichloroethane (DDT), chlordane and mirex, medical waste, obsolete POPs and engaging civil society; and 3) lessons learned in terms of GEF financing strategies, best technologies and environmental practices to address POPs.     

Climate variability and changes in the major cities of Bangladesh: observations,possible impacts and adaptation

High population density, inadequate infrastructure and low adaptive capacity have made the urban population of Bangladesh highly vulnerable to climate change. Trends in climate and climate-related extreme events in five major cities have been analyzed in this paper to decipher the variability and ongoing changes in urban Bangladesh. An analysis of 55 years (1958–2012) of daily rainfall and temperature data using nonparametric statistical methods shows a significant increase in annual and seasonal mean daily maximum and minimum temperatures in all five cities. A significant increase in climate-related extreme events, such as heavy rainfall events (>20 mm), hot days (>32 °C) and hot nights (>25 °C), is also observed. Climate model results suggest that these trends will continue through the twenty-first century. Vulnerability of urban livelihoods and physical structures to climate change is estimated by considering certainty and timing of impacts. It has been predicted that public health and urban infrastructures, viz. water and power supply, would be the imminent affected sectors in the urban areas of Bangladesh. Adaptation measures that can be adopted to mitigate the negative impacts of climate change are also discussed.     

Evaluation of Dust Generated from Basic Oxygen Furnace Steel Making

Abstract

A detailed characterization has been made of the dust generated during steel making in basic oxygen furnaces (BOF). Chemical composition and particle size distribution have been analyzed. X-ray diffraction, scanning electron microscopy, and electron probe micro-analysis techniques have been used to identify the morphology and the nature of the major iron-bearing phases as well as the gangue constituents. The dust characteristics have been found to be widely different, depending on the type of process used in BOF steel making, namely, suppressed combustion or total combustion. The type of dust abatement system (dry or wet) additionally influences the nature of the gangue constituents. The possibility of utilizing the iron-bearing major phases has been examined.     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

Who's in and why? A typology of stakeholder analysis methods for natural resource management

Stakeholder analysis means many things to different people. Various methods and approaches have been developed in different fields for different purposes, leading to confusion over the concept and practice of stakeholder analysis. This paper asks how and why stakeholder analysis should be conducted for participatory natural resource management research. This is achieved by reviewing the development of stakeholder analysis in business management, development and natural resource management. The normative and instrumental theoretical basis for stakeholder analysis is discussed, and a stakeholder analysis typology is proposed. This consists of methods for: i) identifying stakeholders; ii) differentiating between and categorising stakeholders; and iii) investigating relationships between stakeholders. The range of methods that can be used to carry out each type of analysis is reviewed. These methods and approaches are then illustrated through a series of case studies funded through the Rural Economy and Land Use (RELU) programme. These case studies show the wide range of participatory and non-participatory methods that can be used, and discuss some of the challenges and limitations of existing methods for stakeholder analysis. The case studies also propose new tools and combinations of methods that can more effectively identify and categorise stakeholders and help understand their inter-relationships.     

Evidence of new particle formation during post monsoon season over a high-altitude site of the Western Ghats,India

The formation of ultrafine particles, their growth, and associated characteristic features has been studied during new particle formation events over a high-altitude station of the Western Ghats during the 2014 post-monsoon season. Most of the events were observed during noon time where particle bursts in the nucleation-mode size range from 5 to 25 nm followed by sustained growth in size. This phenomenon persists for ～4–8 h with a growth rate of 1–2 nm h^–1. Peak concentrations of nucleation-mode particles during the event generally vary from 2300 to 5000 cm^–3. The mean growth rate is 1.4 ± 0.42 nm h^–1, particle formation rate is 1.14 ± 0.22 cm^–3 s^–1, coagulation sink is 0.35 ± 0.22 cm^–3 s^–1, and condensational sink is 15.4 ± 2.6?×?10^–3 s^–1. All these values are comparable with earlier results from Indian region. Comparison of size-segregated particle number concentration during days of new particle formation events and those without new particle formation were carried out showing a distinct variation in nucleation and Aitken mode with least variability associated with the accumulation mode.