Enforcement Authority and Vegetation Change at Kumbhalgarh Wildlife Sanctuary,Rajasthan, India

Land cover change in protected areas is often associated with human use, especially illicit extraction, but the direction and spatial distribution of such effects and their drivers are poorly understood. We analyze and explain the spatial distribution of vegetation change at the Kumbhalgarh Wildlife Sanctuary in the Aravalli range of Rajasthan, India using remotely sensed data and observation of conservation institutions. Two satellite images are examined in time series over the 13 years following the founding of the sanctuary through a cross-tabulation technique of dominant classes of vegetation density. The resulting change trajectories are compared for their relative distance to high-traffic forest entrance points for local users. The results show 28% of the study area undergoing change, though in multiple trajectories, with both increasing and decreasing density of vegetation in discrete patches. Areas of change are shown to be closer to entrance points than areas experiencing no change. The patchiness of change results from complex issues in local enforcement authority for middle and lower-level officials in Forest Department bureaucracy, leading to further questions about the efficacy and impact of use restrictions in Protected Areas.     

Effect of fluid concentration in titanium machining with an atomization-based cutting fluid (ACF) spray system

The aim of this work is to investigate the effect of metal-working fluid (MWF) concentration on the machining responses including tool life and wear, cutting force, friction coefficient, chip morphology, and surface roughness during the machining of titanium with the use of the ACF spray system. Five different concentrations from 5 to 15% of a water-soluble metalworking fluid (MWF) were applied during turning of a titanium alloy, Ti–6Al–4V. The thermo-physical properties such as viscosity, surface tension and thermal conductivity of these concentrations were also measured. The test results demonstrate that the tool life first extends with the increase in MWF concentration and then drops with further increase. At low concentration (e.g., 5%), a lack of the lubrication effect causes to increase in a higher friction at the tool–chip interface resulting in severe chipping and tool nose/flank wear within a short machining time. On the other hand, at high concentration, the cooling effect is less. This increases cutting temperature and a faster thermal softening/chipping/notching of the tool material and higher friction at the tool–chip–workpiece interaction zones resulting in early tool failure. A good balance between the cooling and the lubrication effects seems to be found at the 10% MWF concentration as it offers the best machining performance. However, machining with flood coolant is observed to perform the best in the range of 5–7%.     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.     

Impact of long-term wastewater application on microbiological properties of vadose zone

Impact of wastewater irrigation on some biological properties was studied in an area where treated sewage water is being supplied to the farmers since 1979 in the western part of National Capital Territory of New Delhi under Keshopur Effluent Irrigation Scheme. Three fields were selected which had been receiving irrigation through wastewater for last 20, 10 and 5 years. Two additional fields were selected in which the source of irrigation water was tubewell. The soil bacterial and fungal population density was studied in soil layers of 0?C15, 15?C30, 30?C60 and 60?C120 cm depths. Groundwater samples were collected from the piezometers installed in the field irrigated with sewage water for last 20, 10 and 5 years. Results indicate that there was significant increase in bacterial and fungal count in sewage-irrigated soils as compared to their respective control. The population density of bacteria and fungi in waste water-irrigated soils increased with the duration of sewage water application and decreased with increasing depth. The bacterial and fungal count was also directly proportional to organic carbon, sand and silt content and negatively correlated to the clay content, electrical conductivity, pH and bulk density of the soil. Groundwater under sewage-irrigated fields had higher values of most probable number (MPN) index as compared to that of tubewell water-irrigated fields. All the shallow and deep groundwaters were found to be contaminated with faecal coliforms. The vadose zone had filtered the faecal coliform to the tune of 98?C99%, as the MPN index was reduced from ??18,000 per 100 ml of applied waste water to 310 per 100 ml of groundwater under 20 years sewage-irrigated field. The corresponding values of MPN were 250 and 130 per 100 ml of shallow groundwater under 10 and 05 years sewage-irrigated fields, respectively. Rapid detection of faecal contamination suggested that the Citrobacter freundii and Salmonella were dominant in shallow groundwater, while Escherichia coli was dominant in deep groundwater collected from sewage-irrigated field.     

Groundwater quality assessment of Nawa Tehsil in Nagaur district (Rajasthan) with special reference to Fluoride

In recent years, the problem of fluoride in Nawa tehsil (Nagaur district) has reached at an alarming proportion. In the last decades, the water table of the Nawa tehsil has fallen. With the lowering of the water table, the amount of fluoride has increased in the subsoil water which is used by the villagers when drawn through hand pumps, tube wells etc. So the present study illustrates the groundwater quality of randomly selected villages of Nawa tehsil. The highest fluoride concentration was found in Rulaniyo ki Dhani i.e. 14.62 ppm. The excessive intake of fluoride resulted in dental and skeletal fluorosis.     

Heterogeneous photocatalysis for removal of microbes from water

Increasing water pollution by microbes has become a source of serious health concern across the globe. Production of potentially carcinogenic disinfection by-products has marred credibility of traditional water purification techniques like chlorination. Photocatalysis has emerged as a promising alternative technique for the disinfection of water with minimal risk of harmful by-products. The process involves a wide band gap semiconductor material which, upon irradiation of light, produces electrons and holes with high redox potential to degrade organic contaminants and microbes. In this review, we analyze the research trends in photocatalytic inactivation of water borne microorganisms. This report analyzes the major factors that affect the disinfection efficiency using this process. The discussion also includes plausible mechanisms of microbial degradation as well as a kinetic model of the inactivation process. Different approaches, like doping of semiconductors or energy band engineering or plasmon coupling, have been reported for the enhancement and utilization of ambient solar light. Photocatalysis could be a cost-effective and environmentally friendly water purification technique though further research is required to enhance its efficiency with the use of solar light.     

Household disposables as breeding habitats of dengue vectors: Linking wastes and public health

An assessment of the household wastes as larval habitats of the dengue vectors was made considering Kolkata, India, as geographical area. Wastes of four major categories, namely, earthen, porcelain, plastic and coconut shells were monitored for positive with immature of either Aedes aegypti or Aedes albopictus. Twenty six types of wastes with varying size and shape, resembling containers, were identified that hosted mosquito immature. The number of waste containers positive for Aedes immature varied significantly (P < 0.05) with respect to location, type and month. The relative density of Aedes immature in the waste containers varied significantly (P < 0.05) with the types and months. The significant interaction between the month, waste container types and density of Aedes immature suggest that the household wastes are important contributors to the maintenance of the population of Aedes mosquito in the city. Based on the relative density of mosquito immature in the wastes, cluster analysis allowed segregation and classification of the wastes and their importance as mosquito larval habitats. Apparently, the containers that are most frequently disposed off contributed largely to the sustenance of Aedes mosquito population in the city. This calls for a strict legislation towards disposal as well as enhanced management of the household wastes. A link between the wastes disposed and subsequent conversion to the mosquito larval habitats cautions for continuance of Aedes population and possibility of dengue epidemics if the existing management practices are not improved.     

Pesticide tolerance of Paenibacillus sp. D1 and its chitinase

Excessive use of pesticides in agriculture has led to several problems pertaining to loss of soil fertility and environmental degradation. Biological control agents offer the best alternative to reduce use of toxic pesticides. Paenibacillus sp. D1 isolated from the effluent treatment plant of a seafood processing industry exhibited broad spectrum tolerance towards a number of pesticides at concentrations higher than recommended for field applications. The isolate showed enhanced growth and chitinase production in the presence of some protectant fungicides. None of the tested demethylase inhibitor (DMI) fungicides inhibited growth and chitinase production except triadimefon. The isolate was also tolerant to most commonly used insecticides belonging to the organophosphate, carbamate and cyclodiene organochloride classes. Chitinase of Paenibacillus sp. D1 was found to be more tolerant than the organism itself and was highly stable in the presence of pesticides at the temperature under field conditions in Gujarat, India, i.e. 40 °C. This was suggestive of its potential in integrated pest management (IPM) to significantly reduce the use of harmful chemicals. To our knowledge this is the first extensive study on pesticide tolerance of the Paenibacillus species and its chitinase.     

Environmental management plan (EMP) for Melamchi water supply project, Nepal

More than 1.5 million people live in the Kathmandu valley. The valley is facing an extreme shortage of water supply. At the same time the demand is escalating rapidly. To address this issue of scarcity of water, the government of Nepal has proposed a project of inter-basin transfer of water from Melamchi River located 40 km north-east of the Kathmandu valley. The project will cover two districts and three municipalities and will potentially have significant impacts on the environment. In accordance with the Environmental Protection Regulation of Nepal (1997), the Melamchi Water Supply Project (MWSP) has undergone an EIA during the feasibility study stage of the proposed project. The recommendations contained in the EIA were integrated into the project design for implementation in 2006. This paper summarizes the background of MWSP, the environmental concerns described in the EIA and the status of Environmental Management Plan (EMP) developed to address environmental compliance and other issues involving participation and support of the local people. This paper also provides some lessons to learn on the modalities of addressing the demands and grievances of the local people concerning environmental management.     

Assessment of groundwater quality: a fusion of geochemical and geophysical information via Bayesian neural networks

Deplorable quality of groundwater arising from saltwater intrusion, natural leaching and anthropogenic activities is one of the major concerns for the society. Assessment of groundwater quality is, therefore, a primary objective of scientific research. Here, we propose an artificial neural network-based method set in a Bayesian neural network (BNN) framework and employ it to assess groundwater quality. The approach is based on analyzing 36 water samples and inverting up to 85 Schlumberger vertical electrical sounding data. We constructed a priori model by suitably parameterizing geochemical and geophysical data collected from the western part of India. The posterior model (post-inversion) was estimated using the BNN learning procedure and global hybrid Monte Carlo/Markov Chain Monte Carlo optimization scheme. By suitable parameterization of geochemical and geophysical parameters, we simulated 1,500 training samples, out of which 50 % samples were used for training and remaining 50 % were used for validation and testing. We show that the trained model is able to classify validation and test samples with 85 % and 80 % accuracy respectively. Based on cross-correlation analysis and Gibb’s diagram of geochemical attributes, the groundwater qualities of the study area were classified into following three categories: “Very good”, “Good”, and “Unsuitable”. The BNN model-based results suggest that groundwater quality falls mostly in the range of “Good” to “Very good” except for some places near the Arabian Sea. The new modeling results powered by uncertainty and statistical analyses would provide useful constrain, which could be utilized in monitoring and assessment of the groundwater quality.