Applicability of microwave-assisted extraction combined with LC-MS/MS in the evaluation of booster biocide levels in harbour sediments

A new sample treatment method for the determination of four common booster biocides (Diuron, TCMTB, Irgarol 1051 and Dichlofluanid) in harbour sediment samples has been developed that uses liquid chromatography-tandem mass spectrometry (LC-MS/MS) after microwave-assisted extraction, followed by clean-up and a solid phase extraction preconcentration step (MAE-SPE). The effects of different variables on MAE-SPE were studied. The recoveries obtained were greater than 75%, and the relative standard deviation was less than 7%. The detection limits ranged between 0.1 and 0.3 ng g⁻¹. The developed methodology was successfully applied to the evaluation of the presence of booster biocides in sediment samples from different harbours and marinas of Gran Canaria Island (Canary Islands, Spain).     

Enhanced retention of linuron, alachlor and metalaxyl in sandy soil columns intercalated with wood barriers

A study has been made of the effect a reactive barrier made of pine (softwood) or oak (hardwood) wood intercalated in a sandy soil column has on the retention of linuron, alachlor and metalaxyl (pesticides with contrasting physicochemical characteristics). The leaching of pesticides has been carried out under a saturated flow regime and breakthrough curves (BTCs) have been obtained at flow rates of 1 mL min⁻¹ (all pesticides) and 3 mL min⁻¹ (linuron). The cumulative curves in the unmodified soil indicate a leaching of pesticides >80% of the total amount of compound added. After barrier intercalation, linuron leaching decreases significantly and a modification of the leaching kinetics of alachlor and metalaxyl has been observed. The theoretical R factors increased ∼2.6-3.3, 1.2-1.6-fold, and 1.4-1.7-fold and the concentration of the maximum peak decreased ∼6-12-fold, 2-4-fold and 1.2-2-fold for linuron, alachlor and metalaxyl, respectively. When considering the three pesticides, significant correlations have been found between the theoretical retardation factor (R) and the pore volume corresponding to the maximum peaks of the BTCs (r = 0.77; p < 0.05) or the total volume leached (r = −0.78; p < 0.05). The results reveal the efficacy of reactive wood barriers to decrease the leaching of pesticides from point sources of pollution depends on the type of wood, the hydrophobicity of the pesticide and the adopted water flow rate. Pine was more effective than oak in decreasing the leaching of hydrophobic pesticide linuron or in decreasing the maximum peak concentration of the less hydrophobic pesticides in soils. Efficacy of these wood barriers was limited for the least hydrophobic pesticide metalaxyl.     

Immunosuppression in the infaunal bivalve Scrobicularia plana environmentally exposed to mercury and association with its accumulation

This study aimed to test the hypothesis whether mercury (Hg) activates or suppresses inappropriately the immunity of the bivalve Scrobicularia plana inhabiting a Hg contaminated area (Laranjo basin, Ria de Aveiro, Portugal). Immunity endpoints, as well as lipid peroxidation (LPO) as a sign of damage, were evaluated in parallel with total Hg burden. Bivalves from both moderately (MO) and highly (HI) contaminated sites displayed higher haemolymph Hg load and reduced plasma agglutination. Increased haemocytes density and decreased phagocytosis were observed at HI, whereas increased oxidative burst activity (OBA) was observed at MO, pointing out that the immunotoxicity is a result of Hg direct contact involving no ROS intervention. OBA observed at MO was concomitantly associated to peroxidative damage as depicted by LPO increase in haemocytes and haemolymph plasma. Thus, S. plana can be suggested as a suitable bioindicator of metal pollution in coastal areas on the basis of Hg bioaccumulation and immunotoxicity responses.     

Nonparametric functional data estimation applied to ozone data: prediction and extreme value analysis

The study of extreme values and prediction of ozone data is an important topic of research when dealing with environmental problems. Classical extreme value theory is usually used in air-pollution studies. It consists in fitting a parametric generalised extreme value (GEV) distribution to a data set of extreme values, and using the estimated distribution to compute return levels and other quantities of interest. Here, we propose to estimate these values using nonparametric functional data methods. Functional data analysis is a relatively new statistical methodology that generally deals with data consisting of curves or multi-dimensional variables. In this paper, we use this technique, jointly with nonparametric curve estimation, to provide alternatives to the usual parametric statistical tools. The nonparametric estimators are applied to real samples of maximum ozone values obtained from several monitoring stations belonging to the Automatic Urban and Rural Network (AURN) in the UK. The results show that nonparametric estimators work satisfactorily, outperforming the behaviour of classical parametric estimators. Functional data analysis is also used to predict stratospheric ozone concentrations. We show an application, using the data set of mean monthly ozone concentrations in Arosa, Switzerland, and the results are compared with those obtained by classical time series (ARIMA) analysis.     

Arsenic distribution in soils and plants of an arsenic impacted former mining area

A mining area affected by the abandoned exploitation of an arsenical tungsten deposit was studied in order to assess its arsenic pollution level and the feasibility of native plants for being used in phytoremediation approaches. Soil and plant samples were collected at different distances from the polluting sources and analysed for their As content and distribution. Critical soil total concentrations of As were found, with values in the range 70-5330 mg kg⁻¹ in the uppermost layer. The plant community develops As tolerance by exclusion strategies. Of the plant species growing in the most polluted site, the shrubs Salix atrocinerea Brot. and Genista scorpius (L.) DC. exhibit the lowest bioaccumulation factor (BF) values for their aerial parts, suggesting their suitability to be used with revegetation purposes. The species Scirpus holoschoenus L. highlights for its important potential to stabilise As at root level, accumulating As contents up to 3164 mg kg⁻¹.     

Spectral estimation of global levels of atmospheric pollutants

Underlying levels of atmospheric pollutants, assumed to be governed by smoothing mechanisms due to atmospheric dispersion, can be estimated from global emissions source databases on greenhouse gases and ozone-depleting compounds. However, spatial data may be contaminated with noise or even missing or zero-valued at many locations. Therefore, a problem that arises is how to extract the underlying smooth levels. This paper sets out a structural spatial model that assumes data evolve across a global grid constrained by second-order smoothing restrictions. The frequency-domain approach is particularly suitable for global datasets, reduces the computational burden associated with two-dimensional models and avoids cumbersome zero-inflated skewed distributions. Confidence intervals of the underlying levels are also obtained. An application to the estimation of global levels of atmospheric pollutants from anthropogenic emissions illustrates the technique which may also be useful in the analysis of other environmental datasets of similar characteristics.     

Substituting missing data in compositional analysis

Multivariate analysis of environmental data sets requires the absence of missing values or their substitution by small values. However, if the data is transformed logarithmically prior to the analysis, this solution cannot be applied because the logarithm of a small value might become an outlier. Several methods for substituting the missing values can be found in the literature although none of them guarantees that no distortion of the structure of the data set is produced. We propose a method for the assessment of these distortions which can be used for deciding whether to retain or not the samples or variables containing missing values and for the investigation of the performance of different substitution techniques. The method analyzes the structure of the distances among samples using Mantel tests. We present an application of the method to PCDD/F data measured in samples of terrestrial moss as part of a biomonitoring study.     

Antiradical activity of natural honeys and antifungal effect against Penicillium genera

The purpose of the study was to examine the antiradical activity of 11 natural honeys and to evaluate the antifungal properties of honey. Honey samples (10) were collected from different locations of Slovak Republic. Honeys were native to different plant species of Robinia pseudoacaccia, Brassica napus subs. napus, Castanea sativa Mill. Thymus serpyllum vulgaris and the other samples had multifloral origin. The low antiradical activitity in honey samples was determined. The best results were found in thyme honey from Rhodos (11.84 %) and Castanea honey from Nitra (10.61 %). The lowest antiradical activity was found in Acacia honey and determined to be 7.62 %. Statistically significant differences (P< 0.001) were found among thyme/Rhodos and Castanea/Nitra. The antifungal activities of honey samples were tested by 10 %, 25 % and 50 % (by mass per volume) concentration against fungi Penicillium crustosum, P. expansum, P. griseofulvum, P. raistrickii and P. verrucosum and by the agar well diffusion method. The solutions containing 10 % (by mass per volume) of honey did not have any effect on the growth of fungi. The strongest antifungal effect was shown by 50 % honey concentration against P. raistrickii.     

Photophysical and photochemical properties of the pharmaceutical compound salbutamol in aqueous solutions

Salbutamol is a potent β₂-adrenergic receptor agonist widely used in the treatment of bronchial asthma and chronic obstructive pulmonary disease. An increasing number of studies have detected salbutamol in natural water systems worldwide. Studies have shown that sunlight degrades salbutamol resulting in the formation of products; some showing higher toxicity to bacteria Vibrio fischeri than the parent compound. In this contribution, steady-state absorption and emission techniques, high-performance liquid chromatography, and transient absorption spectroscopy are used to investigate the photochemistry of salbutamol in aqueous buffer solutions at controlled pH values. Ground- and excited-state calculations that include solvent effects are performed to guide the interpretation of the experimental results. Salbutamol is sensitive to UVB light absorption in the pH range from 3 to 12, forming products that absorb light at longer wavelengths than the parent compound. Quantum yields of degradation reveal that the deprotonated species is 10-fold more photo-active than the protonated species. In line with this result, the fluorescence quantum yield of the protonated species is more than an order of magnitude higher than that of the deprotonated species. Transient absorption spectroscopy shows that population of the triplet state occurs with a rate constant of 7.1 × 10⁸ s⁻¹ in the protonated species, while a rate constant of 1.7 × 10¹⁰ s⁻¹ is measured for the deprotonated species. While degradation of the deprotonated species is not affected by the presence of molecular oxygen, a twofold increase in the photodegradation yield of the protonated species in air-saturated conditions is observed.