The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

The Effect of CTBN Concentrations on the Kinetic Parameters of Decomposition of Blends of Epoxy Resins Modified with Carboxyl-Terminated Liquid Copolymer

Diglycidyl ether of bisphenol—A (DGEBA)—based epoxy resin was blended in the ratio of 3:1 (weight basis) with cycloaliphatic epoxy (CAE) resin. The prepared blend sample was further blended with different weight percentages of carboxyl-terminated butadiene acrylonitrile copolymer (CTBN) ranging between 0 and 25 wt% with an interval of 5 wt% and cured with stiochiometric amounts of 4, 4’- diamino diphenyl sulphone (DDS) cure agent. Structural changes during blending were studied by Fourier-transform infra-red (FTIR) spectroscopic analysis. The kinetic parameters, viz., order of decomposition reaction (n), activation energy (E), pre-exponential factor (Z) and rate decomposition constant (k), for the decomposition of the samples were calculated by applying Coats-Redfern equation over thermogravimetric (TG) data. The degradation of each sample followed second-order degradation kinetics, which was calculated by Coats-Redfern equation using best-fit analysis. This was further confirmed by linear regression analysis. The validity of data was checked by t-test statistical analysis. Further, the blend sample had higher initial degradation temperature and activation energy than its respective pure epoxy resin indicating that the CTBN acted as thermal stabilizer for epoxy resin which improved the thermal stability.     

Agroforest’s growing role in reducing carbon losses from Jambi (Sumatra), Indonesia

This paper examines the size and intensity of changes among five land categories during the two time intervals in a region of Indonesia that is pioneering negotiations concerning reducing emissions from deforestation and forest degradation (REDD). Maps at 1973, 1993, and 2005 indicate that land-cover change is accelerating, while carbon loss is decelerating in Jambi Province, Sumatra. Land dynamics have shifted from Forest loss during 1973–1993 to Agroforest loss during 1993–2005. Forest losses account for most reductions in aboveground carbon during the both time intervals, but Agroforest plays an increasingly important role in carbon reductions during the more recent interval. These results provide motivation for future REDD policies to count carbon changes associated with all influential land categories, such as Agroforests.     

Health and environmental costs of pesticide use in vegetable farming in Nepal

There is a growing concern of pesticide risks to human health, natural environment and ecosystems. Many previous economic valuations have accounted health aspects or environmental components, but rarely combined; thus, overall risk assessment is partially distorted. The study, conducted close to the capital of Nepal, addressed the health effects of pesticides on small-scale farmers and evaluated the monetary risks of pesticide use on human health and environmental resources. We also aim to establish the relationships among valuation methods. The paper adopts cost of illness, defensive expenditure and contingent valuation willingness to pay approach. The study concluded that the methods used for valuing pesticide risks to human and environmental health are theoretically consistent. The exposed individuals are likely to bear significant economic costs of exposures depending on geographical location, pesticide use magnitudes and frequency. Individuals are willing to pay between 53 and 79% more than the existing pesticide price to protect their health and environment. The integrated pest management training is less likely to reduce health costs of pesticide exposure, although it leads to higher investment in safety measures.     

Comparative analysis of small mammal communities in Chisinau and Yaroslavl, two European cities located in different biomes

Comparative analysis of the structure of small mammal communities has been performed in two European cities located in different biomes: Chisinau (2008?C2009) and Yaroslavl (1994?C2002). The parameters studied included abundance, species composition, similarity and difference of faunas, species diversity, and proportions of groups differing in predisposition to synanthropy. It has been found that the structure of small mammal communities in these cities depends on specific physiographic conditions of the surrounding areas and on the distinctive features of the cities themselves (their structure, age, etc.). The similarity between the faunas is accounted for by the common ecological patterns of fauna formation in the biota of urban cenoses.     

Is the degrowth debate relevant to China?

In industrialized countries, the idea of degrowth has emerged as a response to environmental, social, and economic crises. Realizing environmental limits to and failures of more than half a century of continual economic growth in terms of social progress and environmental sustainability, the degrowth paradigm calls for a downscaling of consumption and production for social equity and ecological sustainability. The call for economic degrowth is generally considered to be delimited to rich countries, where reduced consumption can save “ecological space” enabling people in poor countries to enjoy the benefits of economic growth. China, as one of the economically most expanding countries in the world, has dramatically improved its living standards, particularly along the Eastern coast, over the latest 30 years. However, China is absent from the international debates on growth. This article discusses the implications of the Western degrowth debates for China. Given the distinctive features of China’s development, the paper aims to enrich the degrowth debates, which have hitherto been dominated by Western perspectives. Based upon reflections on social, environmental, and moral dimensions of economic growth, the paper argues that limited natural resources may not continuously support universal affluence at the current level of the rich countries, a level that China is likely to reach within a few decades. Priority for growth in China should therefore be given to the poor regions of the country, and future growth should be beneficial to social and environmental development.     

Post-flooding disaster crop diversity recovery: a case study of Cowpea in Mozambique

To restore food security to a traditional African cropping system following a sudden loss of seed, genetic diversity must be re-established. This study examines the extent to which Cowpea diversity was reinstated two years after a flood disaster in Gaza Province, Mozambique. The contribution that seed from various sources made to the recovery was assessed using semi-structured interviews and morphological and molecular data. Data suggest that diversity had recovered to some extent yet there was evidence of a narrowing of the genetic base, with fewer rare alleles and differences in the distribution of allele frequencies. Although the main channels for accessing seed after the flood were seed relief and markets, these sources contributed to minimal and different diversity. It appears that diversity was regained primarily through social networking in the form of loans or gifts of seed from friends and relatives. The results of the study are discussed in relation to seed relief approaches.     

Influence of fish size and sex on mercury/PCB concentration: importance for fish consumption advisories

Fish advisories for polychlorinated biphenyls (total-PCBs) and mercury are often given on a length-specific basis and fish sex is usually not considered. The relationship between concentration and length is well established for mercury, however its suitability for total-PCBs and the influence of sex over the large scale covered by most monitoring programs is not well known. Here we use what is perhaps the largest consistent sport fish contaminant dataset to evaluate the relationship between total-PCB/mercury and length and sex. We evaluated seven of the most commonly consumed fishes from the Canadian Great Lakes and two Ontario (Canada) inland lakes. For mercury, the relationship between concentration and length was significant (p<0.05) in most fish species and locations. For total-PCB, this relationship was also generally significant in Chinook salmon and lake trout, which are the species with the most advisories for this compound. In contrast, significant relationships were found less often for whitefish, northern pike, smallmouth bass, walleye, and especially yellow perch. However, mercury usually drives fish consumption advisories for these species. Overall, our results support the protocol of issuing contaminant advice on a length-specific basis in fish monitoring programs with reasonable confidence when at least a moderate number of samples over the natural size range of a species are included in the analysis. Sex differences were common for walleye (males>females, p<0.05) but not other species, suggesting that an equal number of male and female walleye should be used in deriving fish advisories for walleye.     

Inhalation dose assessment of indoor radon progeny using biokinetic and dosimetric modeling and its application to Jordanian population

High indoor radon concentrations in Jordan result in internal exposures of the residents due to the inhalation of radon and its short-lived progeny. It is therefore important to quantify the annual effective dose and further the radiation risk to the radon exposure. This study describes the methodology and the biokinetic and dosimetric models used for calculation of the inhalation doses exposed to radon progeny. The regional depositions of aerosol particles in the human respiratory tract were firstly calculated. For the attached progeny, the activity median aerodynamic diameters of 50 nm, 230 nm and 2500 nm were chosen to represent the nucleation, accumulation and coarse modes of the aerosol particles, respectively. For the unattached progeny, the activity median thermodynamic diameter of 1 nm was chosen to represent the free progeny nuclide in the room air. The biokinetic models developed by the International Commission on Radiological Protection (ICRP) were used to calculate the nuclear transformations of radon progeny in the human body, and then the dosimetric model was applied to estimate the organ equivalent doses and the effective doses with the specific effective energies derived from the mathematical anthropomorphic phantoms. The dose conversion coefficient estimated in this study was 15 mSv WLM⁻¹ which was in the range of the values of 6-20 mSv WLM⁻¹ reported by other investigators. Implementing the average indoor radon concentration in Jordan, the annual effective doses were calculated to be 4.1 mSv y⁻¹ and 0.08 mSv y⁻¹ due to the inhalation of radon progeny and radon gas, respectively. The total annual effective dose estimated for Jordanian population was 4.2 mSv y⁻¹. This high annual effective dose calculated by the dosimetric approach using ICRP biokinetic and dosimetric models resulted in an increase of a factor of two in comparison to the value by epidemiological study. This phenomenon was presented by the ICRP in its new published statement on radon.