Achievement of high rate nitritation with aerobic granular sludge reactors enhanced by sludge recirculation events

A ratio control strategy has been used to demonstrate the feasibility of this automatic control procedure for the achievement of stable full and partial nitritation. The control strategy assured constant ratio between the dissolved oxygen (DO) and the total ammonia nitrogen (TAN) concentrations in the bulk liquid of aerobic granular sludge reactors operating in continuous mode. Three different set-ups with different reactor capacities were used (3, 110, and 150 L). High strength synthetic wastewaters and reject water were tested with similar performance. Achieved nitrogen loading rates ranged between 0.4 and 6.1 kgN·m^-3·d^-1, at temperatures between 20°C and 30°C. Granular sludge and nitritation were stable in the long term continuous operation of the reactors. Suitable stable effluent for Anammox has been obtained using the desired TAN setpoint (i.e. 50% of influent ammonium oxidation). An existing biofilm model developed incorporating the implemented control loops and validated in a previous publication was used to investigate the effects of the ammonium concentration of the influent and the biofilm density on the achievement of full nitritation. The model demonstrated how sludge recirculation events led to a stable and significant increase of the biomass concentration in the reactor, which in turn resulted in the achievement of high nitrogen loading rates, due to the action of the control strategy. The model predicted an enhancement of stable full nitritation at higher ammonium concentrations in the influent. Poor influence of the biofilm density in the achievement of full nitritation was predicted with the model.     

Influence of long-term consumption of bitter apricot seeds on risk factors for cardiovascular diseases

The present study was designed to reveal whether long-term consumption of bitter apricot seeds causes changes in lipid profile and other risk factors for cardiovascular diseases. The study group consisted of 12 healthy adult volunteers (5 females and 7 males). The average age of women was 41.60 ± 11.28 years and the average age of men was 36.71 ± 13.70 years. Volunteers consumed 60 mg kg^?1 of body weight of bitter apricot seeds divided into 8–12 doses daily for 12 weeks. Volunteers were recruited from the general population of Slovak Republic. After 12 weeks, mean body weight of the participants increased from 77.34 to 78.22 kg (P > 0.05). The average total cholesterol levels decreased from 4.86 mmol L^?1 at the beginning of the study to 4.44 mmol L^?1 at the end of the study (P < 0.05). We did not observe any significant increase in high-density cholesterol (from 1.55 to 1.60 mmol L^?1). The average low-density cholesterol levels decreased from 2.93 mmol L^?1 at the beginning of the study to 2.31 mmol L^?1 at the end of the study (P < 0.001). Concentration of triglycerides increased significantly over the 12-week intervention period from 0.84 to 1.17 mmol L^?1. After the intervention, the high-sensitivity C-reactive protein level decreased from 1.92 to 1.23 mg L^?1, but results were non-significant (P > 0.05). Creatine kinase serum levels increased from 2.31 to 2.77 mg L^?1 (P > 0.05) over the 12-week intervention period. The results suggest that regular intake of bitter apricot seeds may be considered potentially useful for prevention of cardiovascular diseases.     

A novel method for reducing acid mine drainage using green liquor dregs

When exposed to the weather, sulfidic minerals release sulfuric acid, metals and metalloids. This leachate can devastate nearby ecosystems for centuries. This article reports a novel barrier system based on green liquor dregs that reduces acid generation, is inexpensive, and is practical for implementation at operational mines. Two waste rock piles were constructed. One pile was left open to the atmosphere, and the other was sealed with green liquor dregs and partially capped with a polyethylene liner. This test was designed in collaboration with personnel from Boliden Mineral AB, a Swedish mining company in order to ensure that the results would be practical to implement at an operational mine. Leachate flow and chemistry were monitored in both piles over a period of 12 months. Effluent volume was 40 % lower in the test pile, while thirteen of the twenty elements assessed showed average concentrations that were 50 % lower in the test pile than in the control pile. For the most environmentally toxic elements As, Cd, Pb and Hg, reductions were even more significant, ranging between 67 and 87 %. These positive results are hypothesized to be primarily due to the chemical and physical characteristics of the green liquor dregs. The novelty of this result is that it is the first barrier system that fulfills the multiple needs of the Swedish mining industry: It is effective in reducing acid mine drainage while remaining both economical and practical. No other barrier system meets these requirements.     

A comparison of two procedures to estimate three basic monitoring landscape metrics for monitoring

An interesting alternative to wall-to-wall mapping approaches for the estimation of landscape metrics is to use sampling. Sample-based approaches are cost-efficient, and measurement errors can be reduced considerably. The previous efforts of sample-based estimation of landscape metrics have mainly been focused on data collection methods, but in this study, we consider two estimation procedures. First, landscape metrics of interest are calculated separately for each sampled image and then the image values are averaged to obtain an estimate of the entire landscape (separated procedure, SP). Second, metric components are calculated in all sampled images and then the aggregated values are inserted into the landscape metric formulas (aggregated procedure, AP). The national land cover map (NLCM) of Sweden, reflecting the status of land cover in the year 2000, was used to provide population information to investigate the statistical performance of the estimation procedures. For this purpose, sampling simulation with a large number of replications was used. For all three landscape metrics, the second procedure (AP) produced a lower relative RMSE and bias than the first one (SP). A smaller sample unit size (50 ha) produced larger bias than a larger one (100 ha), whereas a smaller sample unit size produced a lower variance than a larger sample unit. The efficiency of a metric estimator is highly related to the degree of landscape fragmentation and the selected procedure. Incorporating information from all of the sampled images into a single one (aggregated procedure, AP) is one way to improve the statistical performance of estimators.     

Costs of food waste along the value chain: Evidence from South Africa

In a previous paper (Nahman et al., 2012), the authors estimated the costs of household food waste in South Africa, based on the market value of the wasted food (edible portion only), as well as the costs of disposal to landfill. In this paper, we extend the analysis by assessing the costs of edible food waste throughout the entire food value chain, from agricultural production through to consumption at the household level. First, food waste at each stage of the value chain was quantified in physical units (tonnes) for various food commodity groups. Then, weighted average representative prices (per tonne) were estimated for each commodity group at each stage of the value chain. Finally, prices were multiplied by quantities, and the resulting values were aggregated across the value chain for all commodity groups. In this way, the total cost of food waste across the food value chain in South Africa was estimated at R61.5 billion per annum (approximately US$7.7 billion); equivalent to 2.1% of South Africa’s annual gross domestic product. The bulk of this cost arises from the processing and distribution stages of the fruit and vegetable value chain, as well as the agricultural production and distribution stages of the meat value chain. These results therefore provide an indication of where interventions aimed at reducing food waste should be targeted.     

Recognizing animal personhood in compassionate conservation

Compassionate conservation is based on the ethical position that actions taken to protect biodiversity should be guided by compassion for all sentient beings. Critics argue that there are 3 core reasons harming animals is acceptable in conservation programs: the primary purpose of conservation is biodiversity protection; conservation is already compassionate to animals; and conservation should prioritize compassion to humans. We used argument analysis to clarify the values and logics underlying the debate around compassionate conservation. We found that objections to compassionate conservation are expressions of human exceptionalism, the view that humans are of a categorically separate and higher moral status than all other species. In contrast, compassionate conservationists believe that conservation should expand its moral community by recognizing all sentient beings as persons. Personhood, in an ethical sense, implies the individual is owed respect and should not be treated merely as a means to other ends. On scientific and ethical grounds, there are good reasons to extend personhood to sentient animals, particularly in conservation. The moral exclusion or subordination of members of other species legitimates the ongoing manipulation and exploitation of the living worlds, the very reason conservation was needed in the first place. Embracing compassion can help dismantle human exceptionalism, recognize nonhuman personhood, and navigate a more expansive moral space.     

Real-time monitoring of water quality using fish and crayfish as bio-indicators: a review

Water quality monitoring using fish and crayfish as bio-indicators requires an understanding of the state of pollution of waters, choice of bio-indicators, physiological and behavioral endpoints of fish and crayfish, and principles of the methodology and their potential applications. Here, we discuss telemetry, acoustic monitoring, vision-based monitoring, measures of ventilatory activity, electrocardiography, and fiber-optic plethysmography. Assessment of water quality must be based, not only on physicochemical characteristics of the current environment as determined by chemical analyses, but also on observations of the physiology and behavior of its inhabitants. Real-time biomonitoring is suggested as the most reliable method, since it incorporates living organisms into the system to serve as biosensors. The potential application of the methods discussed includes use at water treatment plants and water supply stations for prevention of hazardous toxicological events, and, for aquaculture, in ponds, lakes, and aquariums for monitoring growth, population size, and behavior traits.