Evaluation of heavy metal availability in polluted soils by two sequential extraction procedures using factor analysis

Superficial soil and grass samples from 13 locations affected by several anthropogenic sources (mining, metal factory, traffic emissions) were collected in Gipuzkoa, northern Spain. The more labile metal fractions, the mobile (extracted by 0.01 mol l(-1) CaCl(2)) and the mobilisable (extracted by 0.005 mol l(-1) DTPA), were evaluated using a short sequential procedure with two steps. From the results a short-medium term potential lability of Cd, Cu, Zn and Pb can be concluded. The labile levels were compared with the results obtained using the Tessier sequential procedure. Factor analysis was used to check the associations between the total metal contents in soil and grass, as well as between the levels of the different sequential fractions and the total content in grass. Cd, Cu and Zn labile levels were related to total metal grass contents indicating its suitability for the availability studies in polluted soil-plant system.     

Analyses of ozone in urban and rural sites in Málaga (Spain)

Ozone concentrations were measured at two (urban and a rural) sites near the city of Málaga (Spain). The aim of this study was to determine the daily, monthly and seasonal variation patterns of ozone concentrations at both sites and to study the possible regional influences. The daily variations mostly have the usual features with the afternoon maximum and the night minimum being more pronounced in the urban area. The average monthly concentrations throughout the year start to increase in March reaching their maximum values in July for the urban site. However, in the rural area, the monthly variations are smaller reaching their maximum value in June. The hourly evolution of the ozone concentrations in both sampling sites is well defined in spring and summer and not so well defined in autumn and winter. Taking into account the four seasons, the rural concentrations are higher than the urban ones. Summer is the season when there are similar concentrations at both sampling sites. Average hourly summer afternoon ozone for the hours 12:00-20:00 LST exceeded the 110 microg m(-3) European Union guidelines for human health for 8 h ozone exposure at the urban and rural sites.     

Structure-activity relationships for association of linear alkylbenzene sulfonates with activated sludge

Sorption of linear alkylbenzene sulfonates (LAS) on sludge particles from wastewater treatment plants was studied. The effect of alkyl chain length and the water hardness were investigated. Sorption on sludge increases with increasing alkyl chain length in the LAS molecules. The results are interpreted in terms of a hydrophobic bonding mechanism being the critical micelle concentration a good index of the surfactant hydrophobicity. The increase in free energy of adsorption for the addition of successive methylene groups to the alkyl chain was estimated as 2.4 kJ/mol. Water hardness clearly enhances the sorption of LAS homologues on sludge and seems to promote cooperative sorption at high surfactant and calcium ion concentrations. An empirical equation was provided that allow to estimate the partition coefficient between aqueous and solid phases for LAS homologues as a function of the alkyl chain length and the water hardness.     

Dissipation of racemic mecoprop and dichlorprop and their pure R-enantiomers in three calcareous soils with and without peat addition

Two racemic herbicides, mecoprop (R,S-MCPP) and dichlorprop (R,S-DCPP), as well as their enantiopure R-forms, were incubated in three calcareous soils at 15 degrees C and 80% of their field capacity to try to elucidate their behaviour in soil and compare the dissipation rates when racemic and enantiopure compounds are used. Quantitation of pesticides is made by HPLC and the R/S ratio by GC-MS. The inactive S-enantiomer from the racemic forms persists longer than the R-forms in silt and sandy loam soils, but for shorter time in the clay loam soil. The pure R-enantiomers, both for MCPP and DCPP, after incubation in soil, are partially converted into their S-forms. In all cases, the dissipation of racemic and pure enatiomeric forms is lower in the clay loam soil than in the silt and sandy loam soils. The R-forms' peristence, in the three soils, is approximately two times lower when they are incubated alone than when they are incubated as racemic compounds. When peat is added, the persistence of these herbicides in the silt and sandy loam soils increases, while in the clay loam soil it decreases. Besides, in the clay loam soil, the enantiomeric ratio (ER) changes from its S-preferential degradation to a preferential degradation of its R-form, so an increase in the persistence of the inactive S-form occurs.     

Study of the degradation of dyes by MnP of Phanerochaete chrysosporium produced in a fixed-bed bioreactor

The production of ligninolytic enzymes by the fungus Phanerochaete chrysosporium in a fixed-bed tubular bioreactor, filled with cubes of nylon sponge, operating in semi-solid-state conditions, was studied. Maximum individual manganese-dependent peroxidase (MnP) and lignin peroxidase (LiP) activities of 1293 and 225 U/l were detected.The in vitro decolourisation of two structurally different dyes (Poly R-478, crystal violet) by the extracellular liquid obtained in the above-mentioned bioreactor was monitored in order to determine its degrading capability. The concentration of some compounds (sodium malonate, manganese sulphate) from the reaction mixture was optimised in order to maximise the decolourisation levels. A percentage of Poly R-478 decolourisation of 24% after 15 min of dye incubation was achieved.On the other hand, a methodology for a long treatment of these dyes based on the continuous addition of MnP enzyme and H(2)O(2) was developed. Moreover, this enzymatic treatment was compared with a photochemical decolourisation process. The former allowed to maintain the degradation rate almost constant for a long time, resulting in a decolourisation percentage of 70% and 30% for crystal violet and Poly R-478, respectively, after 2 h of treatment. As for the latter, it was not able to degrade Poly R-478, whereas crystal violet reached a degradation of 40% in 2 h.     

The significance of water ionic strength on aluminium toxicity in brown trout (Salmo trutta L.)

The toxicity of aluminium to fish is related to interactions between aluminium and the gill surface. We investigated the possible effect of water ionic strength on this interaction. The mortality of brown trout (Salmo trutta L.) exposed to three different degrees of Al polymerisation was compared in water with increased ionic strength (mean 7.31 x 10(-4) M) after additions of the base cations Ca2+, Mg2+, Na+ or K+, and in water with no such addition (mean ionic strength 5.58 x 10(-4) M). Only a very slight ameliorating effect of increased ionic strength was observed, while the degree of Al polymerisation was of major importance in fish mortality. In addition, it was observed that smaller fish survived the Al exposures for a longer time than larger fish. We hypothesise that this is because larger fish are more susceptible to hypoxia than smaller fish.     

Compensation processes of Aleppo pine (Pinus halepensis Mill.) to ozone exposure and drought stress

A long-term experiment was performed to study the effects of O3 and drought-stress (DS) on Aleppo pine seedlings (Pinus halepensis Mill.) exposed in open-top chambers. Ozone reduced gas exchange rates, ribulose-1,5-biphosphate carboxylase/oxygenase activity (Rubisco), aboveground C and needle N concentrations and C/N ratio and Ca concentrations of the twigs under 3 mm (twigs<3) and the aerial biomass. Also it increased phosphoenolpyruvate carboxylase (PEPc) and N and K concentrations of the twigs<3. Water stress decreased gas exchange rates, predawn needle water potential (PsiPd), C/N ratio, twigs<3 Ca, plant growth, aerial biomass and increased N, twigs with a diameter above 3 mm P and Mg concentrations. The combined exposure to both stresses increased N concentrations of twigs<3 and roots and aboveground biomass K content and decreased root C, maximum daily assimilation rate and instantaneous water use efficiency. The sensitivity of Aleppo pine to both stresses is determined by plant internal resource allocation and compensation mechanisms to cope with stress.     

Water management for a megacity: Mexico City Metropolitan Area

The paper presents an overview of the present situation of the Mexico City Metropolitan Area (MCMA). The analysis indicates an urgent need to radically improve the current water supply and wastewater management practices, to become sustainable. The MCMA is one of the most rapidly growing urban centers of the world, with a population of about 21 million people, a very high rate of immigration and numerous illegal settlements. In order to meet the increasing water demand, successive governments have focused almost exclusively on supply management and engineering solutions, which have resulted in investments of hundreds of millions of USD and the construction of major infrastructure projects for interbasin water transfer. Environmental, economic and social policies associated with water management are mostly inadequate and insufficient, which is resulting in increasing deterioration in the environment, health and socioeconomic conditions of a population living in one of the largest urban agglomerations of the world. Surprisingly, however, no long-term strategies on demand-management, reuse, conservation, and improved water-management practices have been developed so far.     

Biodegradation of technical mixtures of oxyethylenated aliphatic alcohols in an aqueous environment

A study of the biodegradability of nonionogenic surfactants of oxyethylenated n-butyl, isobutyl, n-pentyl and isopentyl alcohols was conducted by modified static test according to International Standard Organization method 9888. Degradation was evaluated by changes in concentrations of individual oligomers, ethylene glycols, carboxylic and dicarboxylic acids. Good biological degradability was found, with a "primary" degradability of 75-98% in 10 days. Obtained results, in agreement with our previous work, proved the dominant proportion of degradative scission in the hydrophile part of surfactant molecule. During biological degradation no significant cumulation of mono- to polyethylene glycols appeared neither that of mono- or dicarboxylic acids, and degradation of these components was not a rate-determining degradation factor.     

Simulation of atmospheric PAH emissions from diesel engines

Simulation of atmospheric PAH emissions in a typical European passenger car diesel engine at steady conditions or under a certification cycle is made using in-house software. It is based on neural fitting of experimental data from eight different fuels tested under five operating steady conditions (reproducing modes of the European transient urban/extraurban certification cycle). The software allows the determination of PAH emissions as a function of the fuel composition parameters (aromatic content, cetane index, gross heat power, nitrogen and sulphur content) and operation conditions (torque and engine speed). The mathematical model reproduces experimental data with a maximum error of 20%. This tool is very useful, since changes in parameters can be made without experimental cost and the trend in modifications in PAH emissions is immediately obvious.