Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

Effect of culture conditions on the formation of struvite by Myxococcus xanthus

The amount of struvite (MgNH₄PO₄·6H₂O) produced by Myxococcus xanthus as well as the culture parameter values (pH, total phosphorus, total Kjeldahl nitrogen) were dependent on the culture medium used. Struvite formation started during the exponential phase and the maximum concentration was observed at the beginning of stationary growth phase. The addition of each medium component to the liquid culture influenced the amount of crystal produced. This amount did not depend on the pH increase during the culture period. The moment of the bacterial growth phase, at which each medium component was added, influenced the struvite formation.     

Sustainable tourism development in remote regions? Questions arising from research in the North Kimberley,Australia

This paper is concerned with the sustainable development of a self-drive tourist destination in the remote region in Northern Australia. It first compares officially used data on visitor profiles to the information collected in the survey. Differences between data collected and available secondary data imply that tourism planning should include collection of region-specific tourism information to guide and mitigate potential environmental changes. Natural landscape features are the key attraction for visitors to the region. Visitor satisfaction levels with the current state of the destination are high. However, local residents reported perceived negative impacts of tourism, in particular on amenities and the ecology of the landscape. Visitors also reported behavior that might contribute to environmental impacts. Implications of the findings, in the context of future destination planning, are discussed.     

Predicting the aquatic risk of realistic pesticide mixtures to species assemblages in Portuguese river basins

Although pesticide regulatory tools are mainly based on individual substances, aquatic ecosystems are usually exposed to multiple pesticides from their use on the variety of crops within the catchment of a river. This study estimated the impact of measured pesticide mixtures in surface waters from 2002 and 2008 within three important Portuguese river basins (‘Mondego’, ‘Sado’ and ‘Tejo’) on primary producers, arthropods and fish by toxic pressure calculation. Species sensitivity distributions (SSDs), in combination with mixture toxicity models, were applied. Considering the differences in the responses of the taxonomic groups as well as in the pesticide exposures that these organisms experience, variable acute multi-substance potentially affected fractions (msPAFs) were obtained. The median msPAF for primary producers and arthropods in surface waters of all river basins exceeded 5%, the cut-off value used in the prospective SSD approach for deriving individual environmental quality standards. A ranking procedure identified various photosystem II inhibiting herbicides, with oxadiazon having the relatively largest toxic effects on primary producers, while the organophosphorus insecticides, chlorfenvinphos and chlorpyrifos, and the organochloride endosulfan had the largest effects on arthropods and fish, respectively. These results ensure compliance with European legislation with regard to ecological risk assessment and management of pesticides in surface waters.     

Assessment of Eutrophication in Estuaries: Pressure–State–Response and Nitrogen Source Apportionment

A eutrophication assessment method was developed as part of the National Estuarine Eutrophication Assessment (NEEA) Program. The program is designed to improve monitoring and assessment of eutrophication in the estuaries and coastal bays of the United States with the intent to guide management plans and develop analytical and research models and tools for managers. These tools will help guide and improve management success for estuaries and coastal resources. The assessment method, a Pressure-State-Response approach, uses a simple model to determine Pressure and statistical criteria for indicator variables (where applicable) to determine State. The Response determination is mostly heuristic, although research models are being developed to improve that component. The three components are determined individually and then combined into a single rating. Application to several systems in the European Union (E.U.), specifically in Portugal, shows that the method is transferable, and thus is useful for development of management measures in both the Unites States and E.U. This approach identifies and quantifies the key anthropogenic nutrient input sources to estuaries so that management measures can target inputs for maximum effect. Because nitrogen is often the limiting nutrient in estuarine systems, examples of source identification and quantification for nitrogen have been developed for 11 coastal watersheds on the U.S. east coast using the WATERSN model. In general, estuaries in the Northeastern United States receive most of their nitrogen from human sewage, followed by atmospheric deposition. This is in contrast to some watersheds in the Mid-Atlantic (Chesapeake Bay) and South Atlantic (Pamlico Sound), which receive most of their nitrogen from agricultural runoff. Source identification is important for implementing effective management measures that should be monitored for success using assessment methods, as described herein. For instance, these results suggest that Northeastern estuaries would likely benefit most from improved sewage treatment, where as the Mid and South Atlantic systems would benefit most from agricultural runoff reductions.     

Expedient Metrics to Describe Plant Community Change Across Gradients of Anthropogenic Influence

Human influence associated with land use may cause considerable biodiversity losses, namely in oceanic islands such as the Azores. Our goal was to identify plant indicator species across two gradients of increasing anthropogenic influence and management (arborescent and herbaceous communities) and determine similarity between plant communities of uncategorized vegetation plots to those in reference gradients using metrics derived from R programming. We intend to test and provide an expedient way to determine the conservation value of a given uncategorized vegetation plot based on the number of native, endemic, introduced, and invasive indicator species present. Using the metric IndVal, plant taxa with a significant indicator value for each community type in the two anthropogenic gradients were determined. A new metric, ComVal, was developed to assess the similarity of an uncategorized vegetation plot toward a reference community type, based on (i) the percentage of pre-defined indicator species from reference communities present in the vegetation plots, and (ii) the percentage of indicator species, specific to a given reference community type, present in the vegetation plot. Using a data resampling approach, the communities were randomly used as training or validation sets to classify vegetation plots based on ComVal. The percentage match with reference community types ranged from 77 to 100 % and from 79 to 100 %, for herbaceous and arborescent vegetation plots, respectively. Both IndVal and ComVal are part of a suite of useful tools characterizing plant communities and plant community change along gradients of anthropogenic influence without a priori knowledge of their biology and ecology.     

Environmental Surveillance of Polioviruses in Rio de Janeiro,Brazil, in Support to the Activities of Global Polio Eradication Initiative

Wild polioviruses still remain endemic in three countries (Afghanistan, Pakistan, and Nigeria) and re-emergency of wild polio has been reported in previously polio-free countries. Environmental surveillance has been used as a supplementary tool in monitoring the circulation of wild poliovirus (PVs) and/or vaccine-derived PVs even in the absence of acute flaccid paralysis cases. This study aimed to monitor the presence of polioviruses in wastewater samples collected at one wastewater treatment plant located in the municipality of Rio de Janeiro, Brazil. From December 2011 to June 2012 and from September to December 2012, 31 samples were collected and processed. RD and L20B cell cultures were able to isolate PVs and non-polio enteroviruses in 27/31 samples. Polioviruses were isolated in eight samples (type 1 Sabin = 1, type 2 Sabin = 5, and type 3 Sabin = 2). Vaccine-derived polioviruses were not detected nor evidence of recombination with other PVs or non-polio enterovirus serotypes were observed among the isolates. The Sabin-related serotypes 2 and 3 presented nucleotide substitutions in positions associated with the neurovirulent phenotype at the 5′-UTR. Changes in important Amino acid residues at VP1 were also observed in the serotypes 2 and 3. Environmental surveillance has been used successfully in monitoring the circulation of PVs and non-polio enteroviruses and it is of crucial importance in the final stages of the WHO global polio eradication initiative. Our results show the continuous circulation of Sabin-like PVs and non-polio enteroviruses in the analyzed area during the study period.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.