Study on the formation and transport of ozone in relation to the air quality management and vegetation protection in Tenerife (Canary Islands)

An experimental study on the formation and transport of ozone in ambient air was performed in Tenerife (Canary Islands) in order to investigate the processes affecting ozone levels and air quality. The special features of Tenerife (prevalence of the trade wind pattern (NE), orography and the specific location of the local ozone sources) permit to quantify the role of the ‘long-range transport from northern latitudes' versus the ‘formation and transport of ozone downwind of the main urban areas' of Tenerife. Levels of O₃, NO₂ and O_X were monitored in different types of environments to achieve this purpose. The results showed that: (1) upwind of the urban areas ozone is mainly transported from the ocean by trade winds, (2) local ozone titration (by NO) and ozone replenishment from the ocean are the main causes of ozone variations in urban and suburban areas, and (3) photochemical ozone production occurs downwind of the urban areas. Photochemical production causes daylight O₃ and O_X levels downwind of urban areas to be frequently (60% and 35% days/year, respectively) higher than upwind of the urban sites (O₃ and O_X excess frequently in the range 5–20 ppbv). Due to the above processes, different daily ozone cycles occur in short distances (<30 km), with maximum O₃ levels during daylight or night depending on the site. Ozone phytotoxicity was assessed by calculating the AOT40 index upwind and downwind of the main urban areas. The critical value for the 5-day-AOT40 index was simultaneously exceeded at the two sites (few times/year) during long-range transport events. During the additional exceedances of the critical value downwind of the urban area, relatively high 5-day-AOT40 values were recorded upwind of the urban site. Thus, long-range transport from northern latitudes may produce relatively high 5-days-AOT40 levels in the oceanic boundary layer. These results are important for the protection of the large number of endemic plants in the Canaries. The conceptual model discussed in this study may be qualitatively applied to other islands which possess features similar to those of Tenerife.     

Photocatalytic degradation of formaldehyde containing wastewater from veterinarian laboratories

The photocatalytic destruction of methanol, formaline (mixture of formaldehyde, methanol and water) and formaline wastes from the preservation of vertinarian physiologic samples has been attempted by two different processes, at high concentrations of reagents and by dossification of reagents, varying pH in both. Experiment evolution has been monitored by measuring the organic matter such as TOC and formaldehyde concentrations [H2CO]. Also, methanol and methanol-formaldehyde interactions with the TiO2 surface have been analysed by FTIR spectroscopy. Results indicate that at high concentrations the catalyst surfacial alterations given by methoxy, formates or carbonates, according to the pH of the sample can profoundly affect catalyst behaviour. It has been established that reagent dossification is advantageous for enhancing photonic efficiency as it minimizes the adsorbate presence that hampers the photocatalytic process.     

Allelopathic potential and systematic evaluation of organic extracts from Canavalia ensiformis leaves (Jack beans)

This article describes the assessment of possible allelopathic potential of organic extracts obtained from leaves of Canavalia ensiformis under laboratory conditions. Furthermore, a systematic evaluation of these extracts was carried out using specific protocols developed in capillary electrophoresis (CE) to determine some groups of secondary metabolites. After the identification and quantification of compounds, the effects of compounds on germination of some common weeds was investigated, which are becoming a real problem in pastures in the state of Pará, Brazil.     

Organochlorine compounds in soils and sediments of the mountain Andean Lakes

Semi-volatile organochlorine compounds (OC) were analyzed in remote Andean soils and lake sediments. The sampling sites covered a wide latitudinal gradient from 18 degrees S to 46 degrees S along Chile and an altitudinal gradient (10-4500 m). The concentrations were in the order of background levels, involving absence of major pollution sources in the high mountain areas. Significant correlations were found between log-transformed concentrations of hexachlorobenzene, alpha- and gamma-hexachlorocyclohexane in soils and total organic content (TOC). In addition, TOC-normalized concentrations of the most volatile OC showed a significant linear dependence with air temperature. This good agreement points to temperature as a significant factor for the retention of long range transported OC in remote ecosystems such as the Andean mountains, although other variables should not be totally excluded. The highest concentrations of OCs were achieved in the sites located at highest altitude and lowest temperature of the dataset.     

Kinetics of photodegradation and ozonation of pentachlorophenol

The oxidation of 2,3,4,5,6-pentachlorophenol (PCP) has been carried out by a photodecomposition process using a polychromatic UV irradiation, and by an ozonation process. In the photodegradation process, the pH accelerated the decomposition rate and the approximate first-order rate constants were evaluated, with values between 0.16+/-0.005 min(-1) at pH=3 and 0.26+/-0.007 min(-1) at pH=9. A more rigorous kinetic study led to the determination of the quantum yields of the reaction, with values of 200+/-7x10(-3) mol/Eins for pH=3 and 22+/-1.1x10(-3) mol/Eins for pH=9. In the ozonation process, the rate constants for the reaction between ozone and PCP were determined by means of a competition kinetics, with values in the range from 0.67x10(5) to 314x10(5) l/mols. The specific rate constants for the un-dissociated and dissociated forms of PCP were also calculated. Finally, in both processes, the intermediate reaction products were identified, the most important being tetrachlorocatechol, tetrachlorohydroquinone and tetra-p-chlorobenzoquinone. Free chloride ion released, which was favored at high pHs, was also followed in both processes.     

Lesions induced by 2,4-D and chlorpyrifos in tench (Tinca tinca L.): implication in toxicity studies

This study was undertaken to demonstrate the toxicity of two pesticides, chlorpyrifos (O,O-diethyl 0-3,5,6-trichloro-2-pyridyl phosphorothioate) and 2,4-D (Dichlorophenoxyacetic acid) to tench (Tinca tinca Linnaeus). Pathological samples of damaged tench kidney showing lesions were taken for statistical analysis in order to quantify different parameters. Analysis revealed differences in the action and/or action time of the two pesticides. These differences were more acute in the case of 2,4-D thereby indicating a greater toxicity. These differences, expressed by mathematical formulae of numerical variables, would enable, a priori, the identification of the responsible pesticide and the time of acting in new natural cases of poisonings with these substances.     

Carbonyls in the metropolitan area of Mexico City: calculation of the total photolytic rate constants Kp(s(-1)) and photolytic lifetime (tau) of ambient formaldehyde and acetaldehyde

A great number of studies on the ambient levels of formaldehyde and other carbonyls in the urban rural and maritime atmospheres have been published because of their chemical and toxicological characteristics, and adverse health effects. Due to their toxicological effects, it was considered necessary to measure these compounds at different sites in the metropolitan area of Mexico City, and to calculate the total rate of photolytic constants and the photolytic lifetime of formaldehyde and acetaldehyde. Four sites were chosen. Sampling was carried out at different seasons and atmospheric conditions. The results indicated that formaldehyde was the most abundant carbonyl, followed by acetone and acetaldehyde. Data sets obtained from the 4 sites were chosen to calculate the total rate of photolysis and the photolytic lifetime for formaldehyde and acetaldehyde. Maximum photolytic rate values were obtained at the maximum actinic fluxes, as was to be expected.     

Influence of the application of sewage sludge on the degradation of pesticides in the soil

A study was made of the influence of the application of sewage sludge on the degradation of pesticides in the soil. Two kinds of sludge were used, with different characteristics, one from an urban treatment plant and one from a food processing plant. Three organophosphorus insecticides, fenitrothion, diazinon and dimethoate, were studied. The relative importance was determined of the chemical and biological degradation processes, which involved experiments on soil and sterile soil samples. A comparative study was also made of the degradation of pesticide residues and the evolution of the microbial population. The application of sludge seems to have a complex effect on the degradation of pesticides, determined by the bioavailability and biodegradability of their active ingredient. The biodegradation of pesticide residues brings about alterations in the microorganism population of the soil.     

Simultaneous estimation of effective and apparent diffusion coefficients in compacted bentonite

Effective diffusion coefficients (D(e)) are usually measured by means of "through-diffusion" experiments in which steady state is reached, and the "time-lag" methods are used to estimate the apparent diffusion coefficient (D(a)). For sorbing radionuclides (as caesium), the time needed to reach steady-state conditions is very large, and the precision in D(a) determinations is not satisfactory. In this paper, a method that allows determining simultaneously effective and apparent diffusion coefficients in compacted bentonite without reaching steady-state conditions is described. Basically, this method consists of an "in-diffusion" experiment in which the concentration profile in the bentonite sample is used to estimate D(a), and the temporal evolution of the solute concentration in the reservoir is used to estimate D(e). This method has several advantages over the typical "through-diffusion" experiments, in particular: (a) experiment duration is significantly shorter, (b) D(a) values are measured with greater precision and (c) it is not necessary to maintain a constant solute concentration in the reservoir. This new method has been used to estimate the effective and apparent diffusion coefficients for caesium in FEBEX bentonite and in order to validate it, the results have been compared with results previously obtained with standard methods. Experimental results have been satisfactorily modelled using a simple model of diffusion in porewater and the measured value of D(e)(Cs) is very similar to D(e)(HTO) in the same bentonite. There is no evidence of "surface diffusion" in FEBEX bentonite for caesium.     

Toxic by-products from the combustion of Kraft lignin

Lignin samples, sub-product in the Kraft process of cellulose from eucalyptus wood, were burnt in a laboratory scale furnace at different residence temperatures and with distinct fuel-rich atmospheres. The yields of CO, CO(2), eight light hydrocarbons (methane, ethylene, ethane, propylene, acetylene, butane, etc.) and 60 semi-volatile+volatile compounds (benzene, toluene, ethylbenzene, styrene, indene, naphthalene, dibenzofuran, phenanthrene, chrysene, etc.) were determined, with nominal reactor temperatures between 800 and 1100 degrees C and residence times of the volatiles evolved and formed between 4 and 7 s. The collection of the gases and volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin respectively, comparing the data obtained in both cases. The emission factor (mg/kg) of the CO was between 2500 and 90000, and under the poor-oxygen atmosphere, the emission factors of many by-toxic products were greater than 100 mg/kg. A pyrolysis run was also performed, obtaining emission factors between 30 and 3000 mg/kg, facilitating its identification. The behaviour of different compounds in the combustion runs was discussed considering three groups in accordance with their stability vs. oxygen, and two groups vs. temperature.