DETERMINING CRITICAL WATER QUALITY CONDITIONS FOR INORGANIC NITROGEN IN DRY,SEMI‐URBANIZED WATERSHEDS1

ABSTRACT: Traditional approaches to establishing critical water quality conditions, based on statistical analysis of low flow conditions and expressed as a recurrence interval for low flow conditions (e.g., 7Q10), may be inappropriate for drier watersheds. The use of 7Q10 as a standard design flow assumes year‐round flow, but in these watersheds, 7Q10 is zero or very small. In addition, the increasing use of multiple year dynamic water quality models at daily time steps can supercede the use of steady state approaches. Many of these watersheds are also under increasing urbanization pressure, which accentuates the flashiness of runoff and the episodic nature of critical water quality conditions. To illustrate, the conditions in the Santa Clara River, California, are considered. A statistical analysis indicates that higher inorganic nitrogen concentrations correlate strongly with low flow. However, peaks in concentrations can occur during the first storms, particularly where nonpoint source contribution is significant. Critical conditions can thus occur at different flow regimes depending on the relative magnitude of flow and pollutant contributions from various sources. The use of steady state models for these dry semi‐urbanized watersheds based on 7Q10 flows is thus unlikely to accurately simulate the potential for exceeding water quality objectives. Dynamic simulation of water quality is necessary, and as the recent intense storm event sampling data indicate, the models should be formulated to consider even smaller time steps. This places increasing demand on computational resources and datasets to accurately calibrate the models at this temporal resolution.     

Lead and cadmium levels in coastal benthic algae (seaweeds) of Tenerife,Canary Islands

Lead and cadmium levels of some species of brown-algae (Phaeophyta) from the mesolittoral (intertidal area) of the Island of Tenerife (central-eastern Atlantic) were determined by Atomic Absorption Spectrometry. The quality control was carried out using a standard "CRM 279 Ulva lactuca".The mean, minimum and maximum concentrations were 11.21, 2.090 and 81.795 microg/g/dw; and 1.13, 0.190 and 5.130 microg/g/dw for lead and cadmium, respectively. The fact that samples registering the highest cadmium concentrations were the same as those which showed the highest lead level corresponding to a sampling station nearby an urban water outlet could be relevant.     

Key factors in levels of public satisfaction with urban waste collection in a northern Spain city

Journal of Material Cycles and Waste Management - Levels of public satisfaction among the inhabitants of Burgos with their urban waste collection service are analyzed by comparing satisfaction...     

Wind energy in the Isthmus of Tehuantepec: conflicts and social implications

Social acceptance is fundamental, and directly affects the installation of wind farms. In this paper, the factors that have had the greatest influence on the development of wind energy in the Itsmo region of Tehuantepec, Mexico are identified. The data were collected face to face through a semi-structured questionnaire of 31 people: owners, municipal authorities, opposition groups, and academic members. The results of the interview highlight the social impact, the lack of application, and concerning ILO Convention 169, the abuse of community rights. As a result, people interviewed perceive that the environmental impact of the installation, and operation of wind farms has been ambivalent: positive due to the intrinsic benefits that wind energy generates compared to other energy sources, and negative in terms of affectation by the noise, and the landscape. However, the income received by the owners of land in which wind facilities are located is lower compared to other parts of the world. In general, the facts show a disintegration between the authorities (federal, state, and municipal), universities are isolated from wind projects, communities are not consulted in projects, and large companies are the main beneficiaries.

     

Characterizing the passage of personal care products through wastewater treatment processes.

Wastewater treatment facilities use secondary treatment to stabilize the effect of discharged effluent on receiving waters by oxidizing biodegradable organic matter and reducing suspended solids and nutrients. The process was never specifically intended to remove trace quantities of xenobiotics, such as endocrine-disrupting compounds (EDCs) and pharmaceuticals and personal care products (PPCPs). Nevertheless, European studies performed at bench-scale or at small facilities have demonstrated that a critical minimum solids retention time (SRT) can achieve good reduction of many EDCs and pharmaceuticals. The objective of this study was to expand these findings to the removal performance for 20 PPCPs commonly found in the influent to full-scale facilities operating in the United States. The participating plants use SRT conditions ranging from 0.5 to 30 days and include facility capacities ranging from 19 000 m3/d (5 mgd) to greater than 1 136 000 m3/d (300 mgd). Two pilot membrane bioreactors were also included in the study. The 20 PPCPs were categorized into nine bin combinations of occurrence frequency and treatment reduction performance. While most compounds were well removed, galaxolide (a musk fragrance) occurred frequently and was resistant to removal. A minimum critical SRT, defined as the minimum SRT, needed to consistently demonstrate greater than 80% removal (SRT80), was compound-dependent, with most compounds removed at 5 to 15 days and a small group requiring longer SRTs. From limited data, no additional removal could be attributed to the use of membrane bioreactors, media filters, or longer hydraulic retention times. Reverse osmosis was effective in removing any remaining compounds.     

Effects of three biochars on copper immobilization and soil microbial communities in a metal-contaminated soil using a metallophyte and two agricultural plants

Environmental Geochemistry and Health - Biochar (BC) is a porous, carbonaceous material produced by slow pyrolysis of biomass under oxygen-limited conditions. BC production has been attracting...     

Remediation of a biodiesel blend-contaminated soil by using a modified Fenton process

A soil contaminated with a B20 biodiesel blend (20 % biodiesel, 80 % diesel) has been treated by modified Fenton process with or without chelant addition. All experiments were conducted without pH adjustment. The reagents used were as follows: hydrogen peroxide as oxidant (400–4,000 mmol L^?1), ferric ion as catalyst (5–20 mmol L^?1), and trisodium citrate (50 mmol L^?1) as chelating agent. Soil was spiked at two different pollutant concentrations (1,000–10,000 mg diesel kg^?1 soil). Higher total petroleum hydrocarbon (TPH) removal efficiencies were obtained (up to 75 %) after the treatment in the absence of the chelant due to the low pH obtained in this case. In the presence of chelant, the TPH conversion obtained was lower because both higher pH is obtained and chelant competes with diesel for the oxidant. On the other hand, at neutral pH, the lifetime of the oxidant was increased. Fatty acid methyl esters (FAMEs) are easier to remove than diesel aliphatic hydrocarbons from the blend. An important decrease of the aqueous phase toxicity was observed after the modified Fenton reaction, supporting that nontoxic by-products were released to the aqueous phase during the treatment.     

AgInput: An Agricultural Nutrient and Pesticide Source Model

Agriculture can be a major nonpoint source (NPS) of nutrient and pesticide contamination in the environment. Available databases do not provide accurate and dynamic data on fertilizer and pesticide application, which limits the ability of complex watershed models to simulate contaminant loads into impaired water bodies. A model for estimating agricultural nutrient and pesticide input for watershed modeling has been developed. Climate, soils, and major agricultural operations are considered within the model, so that it can be adapted to any watershed or subregion within a watershed. The timing of the agricultural operations is a function of the weather data, providing realistic results at daily, monthly, or annual application rates. The model also predicts irrigation demand and biomass production, which can be used to calibrate the model. Model output can be used in any watershed model that considers agricultural land uses. Two case studies were evaluated, using grape vineyards in the Napa River and strawberry production in Newport Bay as examples. The predicted time to maturity corresponded well with actual data. Irrigation and fertilizer needs were very sensitive to weather input. Although the model can generate weather from long-term averages, the simulated results are best when at least observed precipitation and temperature are provided, to capture extreme events. The model has data for 98 crops and 126 pesticides, based on the California Department of Pesticide Regulation database. The databases are easily modifiable by the user to adapt them to local conditions. The output from AgInput is much needed for watershed modeling and for development of total maximum daily loads (TMDLs), based on realistic targets of irrigation, nutrient, and pesticide inputs. The model is available for free download at .     

Blood lead levels, δ-ALAD inhibition, and hemoglobin content in blood of giant toad (Rhinella marina) to asses lead exposure in three areas surrounding an industrial complex in Coatzacoalcos, Veracruz, Mexico

The Coatzacoalcos Region in Veracruz, Mexico houses one of the most important industrial complexes in Mexico and Latin America. Lead is an ubiquitous environmental pollutant which represents a great risk to human health and ecosystems. Amphibian populations have been recognized as biomonitors of changes in environmental conditions. The purpose of this research is to measure exposure to lead and evaluate hematological and biochemical effects in specimens of giant toads (Rhinella marina) taken from three areas surrounding an industrial complex in the Coatzacoalcos River downstream. Lead levels in toads' blood are between 10.8 and 70.6 μg/dL and are significantly higher in industrial sites. We have found a significant decrease in the delta-aminolevulinic acid dehydratase (δ-ALAD) activity in blood from 35.3 to 78 % for the urban–industrial and industrial sites, respectively. In addition, we have identified a strong inverse relationship between the δ-ALAD activity and the blood lead levels (r?=??0.84, p?<?0.001). Hemoglobin and mean corpuscular hemoglobin levels, as well as the condition factor, are found to be lower at industrial sites compared with the reference sites. Our results suggest that the R. marina can be considered a good biomonitor of the δ-ALAD activity inhibition and hematological alterations at low lead concentrations.     

Heavy metal enrichment in surface sediments from the SW Gulf of Mexico

The south west coastal zone in the Gulf of Mexico is an area with great industrial and agricultural development, which experiences intensive prospecting and extraction of hydrocarbons. After running through industrial, agricultural, and urban areas, waters from both the Jamapa River and La Antigua River arrive here. The rivers’ discharge areas of influence were estimated considering the textural and chemical composition of the supplied sediments. The main factors that determine sediment distribution were mineralogy, heavy minerals, carbonates, and anthropic contributions. The presence of metals in excess was evaluated using various pollution indicators, such as the enrichment factor, contamination factor, modified contamination factor, and geo-accumulation indexes. Data from different used contamination indexes show metal enrichments in As, Cu, Zn, Co, Cr, and V in La Antigua; As, Cu, and Cr in Jamapa; and As, Zn, and Pb in the Continental slope area. The adverse effects of metals on aquatic organisms were assessed using sediment quality guidelines that show Ni, As, Cu, and Cr may produce adverse effects on coastal areas. There was no evidence of contamination associated to the oil industry.