Relationship between geographical origin and contents of Pb,Cd, and Cr in honey samples from the state of Paraná (Brazil) with chemometric approach

The aim of this study was to determine the trace elements, Pb, Cd, and Cr in honey samples from eight different regions from the state of Paraná (Brazil), using slurry sampling graphite furnace atomic absorption spectrometry. Chemometric analysis (principal component analysis (PCA)) was applied to classify honey samples according to their levels of the trace elements Pb, Cd, and Cr, which is also related to the geographical origin of honey samples. The mean concentration for the elements followed the order Pb?>?Cr >?>?Cd. The mean values were 200?±?76, 88?±?14, and 4.1?±?4 ng g^?1 for Pb, Cr, and Cd, respectively. It could be verified that honey samples are geographically separated, especially with regard to Pb and Cd contents. Thus, honey can be considered a bioindicator of environmental contamination, suggesting possible contamination in soil, water, and air. This contamination can be related to natural or anthropogenic sources present in the study regions.     

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile

The size distribution of particles has been studied in three sites in the Metropolitan area of Santiago de Chile in the winter of 2009 and a comparison with black carbon was performed. Two sites are located near busy streets in Santiago and the other site is located in a rural area about 40 km west of Santiago with little influence from vehicles, but large influence from wood burning. The campaign lasted 1 or 2 weeks in each site. We have divided the particle size measurements into four groups (10–39 nm, 40–62 nm, 63–174 nm, and 175–700 nm) in order to compare with the carbon monitor. In the sites near the street, black carbon has a high correlation (R ? 0.85) with larger particles (175–700 nm). The correlation decreased when black carbon was compared with smaller particles, having very small correlation with the smallest sizes (10–39 nm). In the rural site, black carbon also has a high correlation (R = 0.86) with larger particles (175–700 nm), but the correlation between black carbon and the finest particles (10–39 nm) decreases to near 0. These measurements are an indication that wood burning does not generate particles smaller than ?50 nm. In the urban sites, particle size distribution is peaked toward smaller particles (10–39 nm) only during rush hours, but at other times, particles size distribution is peaked toward larger sizes. When solar radiation was high, evidence of secondary particle formation was seen in the rural site, but not in the urban sites. The correlation between the number of secondary particles and solar radiation was R² = 0.46, indicating that it there may be other variables that play a role in ultrafine particle formation.

Implications:A study of the size distribution of particles and black carbon concentration in two street sites and one rural site shows that in the last site the number of particles ultrafine particles (d < 40 nm) is 10 times lower but the number of larger particles is about 2 times lower. Thus, the rural site has less of the particles that are more dangerous to health. The number of ultrafine particles is mostly associated with traffic, while the number of larger particles is associated with wood burning and other sources. Wood burning does not generate particles smaller than ?50 nm.     

Physico-chemical characterization of grease interceptors with and without biological product addition

Hardened and insoluble fat, oil, and grease (FOG) deposits are the primary cause of sewer line blockages leading to sanitary sewer overflows (SSOs). However, there have been very few long-term assessments of the physico-chemical characteristics of full-scale grease interceptors (GIs), the first "line of defense" against FOG buildup in sewer lines. In this study, we assessed the physico-chemical characteristics of two full-scale GIs (at a restaurant and a retirement community kitchen) over a one-year period. Statistically significant differences between bioaugmented and untreated cycles were detected for several chemical and physical properties. The treated cycles had lower BOD and COD at the grease interceptor outlet. While the combined data for all treated cycles did not show lower FOG concentrations in the GI outlet compared to the combined data for all untreated cycles, comparison of specific individual treated and untreated cycles show a positive effect due to the addition of product.     

Building Co-Management as a Process: Problem Solving Through Partnerships in Aboriginal Country, Australia

Collaborative problem solving has increasingly become important in the face of the complexities in the management of resources, including protected areas. The strategy undertaken by Girringun Aboriginal Corporation in north tropical Queensland, Australia, for developing co-management demonstrates the potential for a problem solving approach involving sequential initiatives, as an alternative to the more familiar negotiated agreements for co-management. Our longitudinal case study focuses on the development of indigenous ranger units as a strategic mechanism for the involvement of traditional owners in managing their country in collaboration with government and other interested parties. This was followed by Australia's first traditional use of marine resources agreement, and development of a multi-jurisdictional, land to sea, indigenous protected area. In using a relationship building approach to develop regional scale co-management, Girringun has been strengthening its capabilities as collaborator and regional service provider, thus, bringing customary decision-making structures into play to 'care for country'. From this evolving process we have identified the key components of a relationship building strategy, 'the pillars of co-management'. This approach includes learning-by-doing, the building of respect and rapport, sorting out responsibilities, practical engagement, and capacity-building.     

Assessment of Water Supply as an Ecosystem Service in a Rural-Urban Watershed in Southwestern Mexico City

Studies from the ecosystem services perspective can provide a useful framework because they allow us to fully examine the benefits that humans obtain from socio-ecological systems. Mexico City, the second largest city in the world, has faced severe problems related to water shortages, which have worsened due to increasing population. Demand for space has forced changes in land cover, including covering areas that are essential for groundwater recharge. The city has 880 km² of forest areas that are crucial for the water supply. The Magdalena River Watershed was chosen as a model because it is a well-preserved zone within Mexico City and it provides water for the population. The general aim of this study was to assess the ecosystem service of the water supply in the Magdalena River Watershed by determining its water balance (SWAT model) and the number of beneficiaries of the ecosystem services. The results showed that the watershed provides 18.4 hm³ of water per year. Baseflow was dominant, with a contribution of 85%, while surface runoff only accounted for 15%. The zone provides drinking water to 78,476 inhabitants and could supply 153,203 potential beneficiaries. This work provides an example for understanding how ecosystem processes determine the provision of ecosystem services and benefits to the population in a rural–urban watershed in Mexico City.     

Dynamic Mechanical Behavior and Thermal Characterization of Biofilms Based on Starch Modified by Fungi Isolates

Starches modified by Ophiostoma spp. have been investigated to develop bio-materials with enhanced mechanical and physical properties for thermoplastic applications. In this study, glass transition temperature (T_g) of modified starches was investigated in both dynamic mechanical analyzer (DMA) and differential scanning calorimeter (DSC) to detect molecular changes in the starch’s structure. Overall, two thermal transitions were observed in modified starches, as opposed to one in their native counterparts. Scanning electron microscopy of granular modified starch indicated visible damages and internal structural perturbations in addition to occlusion of granular pores by extraneous materials owing to possible enzymatic degradation and production of secondary metabolites. Modified starches registered two-fold improvement in storage modulus as compared to that of native starches. From the study of second derivative of the mass loss against temperature, two thermal transitions were also identified in modified starches. X-ray diffraction analyses showed that crystalline regions of the starch granules remained intact after the modification. It is proposed that the second phase transition potentially corresponds to modified amylose fractions and/or exopolysaccharides produced by the fungi.     

The marginal cost of public funds of mineral and energy taxes in Peru

We estimate the Marginal Cost of Public Funds (MCPF) for Peru using a detailed computable general equilibrium (CGE) model. Revenues from all major sources (including taxes on factors of production, natural resources such as energy and minerals, consumption, and imports) are examined. Our focus is on the efficiency implications of mineral and energy taxes, given their importance to Peruvian public finance. The primary data are from the Global Trade Analysis Project (GTAP) as modified to include detailed tax information from the Peruvian Ministry of Economy and Finance and the Peruvian Internal Revenue Service. Consistent with the theories of public finance, we find that the MCPF is greater for activities that face high or widely varying tax rates. The taxes on energy and mineral activities represent a clear illustration of this relationship. The results presented in this paper indicate opportunities to improved efficiency in the current tax mix, and also indicate the financing costs of proposed expenditures that would be funded with taxes on energy and natural resources.     

Inorganic nanoparticles enhance the production of reactive oxygen species (ROS) during the autoxidation of L-3,4-dihydroxyphenylalanine (L-dopa)

Public concerns over the toxicity of nanoparticles (NPs) are growing due to the rapid development of nanotechnology. An important mechanism of nanotoxicity is oxidative stress resulting from reactive oxygen species (ROS). In this study, the chemical production of ROS by inorganic NPs oxidizing the mammalian phenolic compound, l-3,4-dihydroxyphenylalanine (l-dopa) was evaluated using a ROS sensitive dye, 2′,7′-diclorodihydrofluorescin (DCFH). CeO₂, Fe₂O₃ and Fe⁰ NPs enhanced ROS production during the autoxidation of l-dopa by more than four-fold in reactions that were dependent on O₂. This is the first report of chemical ROS production due to interaction of phenolic compounds with NPs. Mn₂O₃ oxidized DCFH in a reaction that did not require O₂ or l-dopa, suggesting a direct redox reaction between the Mn₂O₃ and the dye. CeO₂, Mn₂O₃ and to a lesser extent Fe⁰ formed clear electron paramagnetic resonance (EPR) signature for hydroxyl radicals when incubated in aerobic aqueous suspensions with spin traps. The results indicate that NPs can generate ROS via chemical reactions with medium components and biomolecules susceptible to oxidation, such as l-dopa. NPs were reactive whereas micron-sized particles were not. The combined assay with l-dopa and DCFH is a method proposed to screen for chemical ROS production by NPs.     

Fine and coarse particulate matter chemical characterization in a heavily industrialized city in central Mexico during Winter 2003

This paper presents the results of the first reported study on fine particulate matter (PM) chemical composition at Salamanca, a highly industrialized urban area of Central Mexico. Samples were collected at six sites within the urban area during February and March 2003. Several trace elements, organic carbon (OC), elemental carbon (EC), and six ions were analyzed to characterize aerosols. Average concentrations of PM with aerodynamic diameter of less than 10 microm (PM10) and fine PM with aerodynamic diameter of less than 2.5 microm (PM2.5) ranged from 32.2 to 76.6 [g m(-3) and 11.1 to 23.7 microg m(-3), respectively. OC (34%), SO4= (25.1%), EC (12.9%), and geological material (12.5%) were the major components of PM2.5. For PM10 geological material (57.9%), OC (17.3%), and SO4= (9.7%) were the major components. Coarse fraction (PM,, -PM2.5), geological material (81.7%), and OC (8.6%) were the dominant species, which amounted to 90.4%. Correlation analysis showed that sulfate in PM2.5 was present as ammonium sulfate. Sulfate showed a significant spatial variation with higher concentrations to the north resulting from predominantly southwesterly winds above the surface layer and by major SO2 sources that include a power plant and refinery. At the urban site of Cruz Roja it was observed that PM2.5 mass concentrations were similar to the submicron fraction concentrations. Furthermore, the correlation between EC in PM2.5 and EC measured from an aethalometer was r(2) = 0.710. Temporal variations of SO2 and nitrogen oxide were observed during a day when the maximum concentration of PM2.5 was measured, which was associated with emissions from the nearby refinery and power plant. From cascade impactor measurements, the three measured modes of airborne particles corresponded with diameters of 0.32, 1.8, and 5.6 microm.     

Protected Areas and Conservation of Biodiversity in the Tropics

Abstract: We compared deforestation rates and the extent of fragmentation inside and outside protected areas in the Sarapiquí region of Costa Rica. We determined deforestation rates using remotely sensed images with supervised classification. We georeferenced the processed images and then transformed them to vector format for final mapping and parameter quantification. The deforestation rate in protected areas was low and declined sharply from 0.56% annually between 1976 and 1986 to 0.16% from 1991 to 1995. Outside the protected areas, the rate decreased from 3.6% in 1976–1986 to 2.8% in 1986–1991, but it increased again to 3.2% in 1991–1995. Fragmentation outside the protected areas increased considerably: the number of patches increased from 537 in 1976 to 1231 in 1996, while during the same period the average size of patches decreased from 0.95 to 0.25 km². Forest landscapes in the Sarapiquí region are likely to lose considerable biodiversity because of the past forest loss and fragmentation even without further increases in deforestation and fragmentation.