Minimization of the environmental impact in the unhairing of bovine hides

This study tests an alternative method to the traditional unhairing method used during the process of tanning the hides. The new method is based on the substitution of sodium sulfide by hydrogen peroxide as an unhairing agent in both hair recovery and recirculation of the floats employed in the process. The properties of the hides obtained using the two methods have been compared and the results indicate that those hides have similar physical, chemical, and organoleptic properties. However, the differences existing from an environmental point of view are significant. These include reductions of water consumption (approx 70%), chemical oxygen demand (approx 35%), toxicity (98%) and total kjendhal nitrogen (50%). Also, the risk associated with the production of hydrogen sulfide is eliminated, which implies a great improvement in terms of safety for the workers. Given the large amounts of water and chemical pollution discharged in the process, the reductions in absolute values represent a significant improvement. A financial assessment was carried out to demonstrate that the proposed new system is 16% more economic than the traditional one.     

Trace metal levels in Prochilodus lineatus collected from the La Plata River, Argentina

Most of the industrial, urban and sewage discharges are released into the La Plata River, Argentina without any previous treatment. However, few works have investigated the extent of metal contamination. The aim of this study was to assess the levels of cadmium, copper, lead and zinc in liver and gills of adults Prochilodus lineatus collected from three sampling stations along the coast of the La Plata River: Berazategui, Berisso and Atalaya (from north to south). Samplings were performed during 2002 and 2004. Berazategui and Berisso were located nearby the main ducts that discharge the urban and domestic waste disposal from the cities of Buenos Aires and La Plata, respectively. The third station, Atalaya, was free of sewage discharges. Levels of cadmium and copper in liver were always higher than those found in gills. Instead, for lead and zinc, high levels were observed either in liver or gills, depending on the sampling station and the sampling period. In both tissues, the concentrations of metals did not differ significantly between male and female fish. In liver samples, the concentrations of cadmium, copper and zinc tended to increase from north to south. Instead, the levels of lead followed an opposite pattern. No clear tendencies were observed in gill samples. The data may be useful as reference levels of metal contaminants in P. lineatus, the most important fish species in the La Plata River system.     

A methodology to identify representative configurations of sensors for monitoring soil moisture

Soil moisture is the key link among hydroecological compartments, responding dynamically to sequences of atmospheric processes and management conditions and modulating physical, chemical, and biological processes in the soil. Currently, there are a variety of monitoring techniques to measure, directly or indirectly, the soil moisture. However, some practical issues remain open like the definition a priori of the number, location and depth of the monitoring points, and the impact of failing or poor performance soil moisture sensors. Here, we present a set of techniques, namely Δθ time series, wavelet filtering, and time stability, to identify representative points and monitoring depths through an analysis of hourly soil moisture time series for different configuration of the monitoring network. We used real data from a monitoring network consisting of seven monitoring points, each one with four EC-5 probes (Decagon Devices Inc., Pullman, WA) at 20, 40, 60, and 100?cm. The use of simple time series of Δθ allowed us to assess the spatiotemporal influence of the monitoring points, while the wavelet periodograms allowed us to get insight about the response of the monitoring points at different time scales. Both methods are easy to implement or adapt to specific conditions, being coherent to the results derived from time stability analysis. For our case study, we concluded that we could reallocate 16 sensors (out of 28) without a significant loss of information. However, the final decision strongly relies on a deep knowledge of the site features and the objectives of the monitoring network.     

Preparation of a porous clay heterostructure and study of its adsorption capacity of phenol and chlorinated phenols from aqueous solutions.

A porous clay heterostructure (PCH) from a Mexican clay was prepared and characterized, and its aqueous phenol and dichlorophenols (DCPs) adsorption capacities were studied using a batch equilibrium technique. The PCH displayed a surface area of 305.5 m2/g, 37.2 A average porous diameter, and a basal space of 23.2 A. The adsorption capacity shown by the PCH for both phenol and DCPs from water (14.5 mg/g for phenol; 48.7 mg/g for 3,4-DCP; and 45.5 mg/g for 2,5-DCP) suggests that the PCH has both hydrophobic and hydrophilic characteristics, as a result of the presence of silanol and siloxane groups formed during the pillaring and calcination of the PCH. The values of maximal adsorption capacity for dichlorophenols were higher than those reported for aluminum pillared clays and some inorgano-organo clays and comparable with some ionic exchange resins.     

Determination of toxic cyclic heptapeptides by liquid chromatography with detection using ultra-violet, protein phosphatase assay and tandem mass spectrometry

Microcystins, toxic cyclic heptapeptides and nodularin-R, a toxic cyclic pentapeptide, were determined using liquid chromatography (LC) with detection using photo-diode array ultra-violet (PDA-UV) and protein phosphatase (PP) assay. Positive fractions were analysed for toxins using collision-induced dissociation (CID) and tandem MS/MS experiments which were carried out simultaneously using electrospray ion-trap instrumentation. Reversed-phase liquid chromatography (LC) using an acetonitrile/water gradient was used for the LC-MS(2) determination of six microcystins standards and nodularin. The molecular related ion species, [M+H](+)([M+2H](2+) in the case of MC-RR), were used as the precursor ions for MS(2) experiments. Optimum calibration and reproducibility data were obtained for MC-LR using LC-MS(2); 0.1-5.0 microg/ml, r2 = 0.992 (n = 3); % RSD < or =7.3 at 0.25 microg MC-LR/ml (n = 3). The detection limit (S/N = 3) was better than 0.1 ng. Water samples for microcystin analysis were first screened using protein phosphatase (PP) assays and positives were concentrated using C-18 solid-phase extraction. The developed method was applied to examine a lake in Ireland contaminated by Microcystis sp. and MC-LR and MC-LA were identified.     

The three-year monitoring of 18 elements in five edible mushroom species collected from an old orchard

Abstract

The content of Al, As, Be, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Ni, Rb, Se, Sr, and Zn in fruiting bodies of edible mushrooms Calocybe gambosa, Entoloma clypeatum, Entoloma saepium, Xerocomellus chrysenteron, and Amanita rubescens growing in an orchard planted with fruit trees and situated close to a high-grown forest was studied during years 2016–2018. A. rubescens showed the highest potential of the element accumulation with bioconcentration factors of 48.5, 16.2, 7.80, 6.53, 1.75, and 1.68 obtained for Rb, Cd, Cu, Zn, Sr, and Mg, respectively. Both Entoloma species accumulated the elements similarly with bioconcentration factors >1.0 obtained for Rb, Cu, Cd, and Mg. Bioconcentration factors <0.05 were obtained for Al, Cr, Fe, and Pb in all studied species. The contents of beryllium (<0.1?mg/kg dry matter) were always the lowest among the studied elements. The contents of some elements of studied mushroom species significantly fluctuated over the years. Despite the fact that some studied elements (As, Be, Cd, Pb, Ni) are considerably toxic for humans, the pronounced effect on health is not expected if the studied mushroom species are consumed occasionally and do not represent the main component of the diet.     

Canopy leaching of nutrients and metals in a mountain spruce forest

Precipitation and throughfall fluxes of major ions, nutrients (C, N, P), and metals (Al, Fe, Mn), and the chemical composition of litter fall and living plant tissue in Norway spruce stands (the Bohemian Forest; Czech Republic), were used to evaluate how microbial processes and decay of plant tissue in canopies influence canopy leaching (CL) of elements. Proton exchange for Mg²⁺, Ca²⁺, and K⁺ in decaying biomass and co-transport of Ca²⁺ and K⁺ out of plant cells with organic acid anions were the most likely processes contributing to CL of base cations. The CL of total P and N (and also NO₃^?) was minor. Important proportions of the N and P mineral forms were transformed to organic forms by microbial processes (primary and bacterial production), with the respective CL of ?13.9 and 16.4 mmol m^?2 yr^?1 for NH₄⁺ and organic N, and ?0.33 and 0.22 mmol m^?2 yr^?1 for dissolved reactive P (DRP) and organic P. Most of particulate P and N in throughfall (～90%) originated from microbial DRP and NH₄⁺ transformations, but particulate C mostly came from the fragmentation of plant tissue (58%). Among metals, CL was not observed for Al, was small for Fe (0.3 mmol m^?2 yr^?1), and greatest for Mn (0.9 mmol m^?2 yr^?1) due to leaching from decaying tissue by acidic precipitation.     

RAMS contribution to efficient waste minimisation and management

The significance of waste management systems in recent years increased due to the growing problems of waste management chains affecting the daily lives of millions of people and the impact on the environment. Several promising approaches have been developed in the past few years. One of them is the waste management system modelling using reliability, availability, maintainability and safety software. This paper analyses and evaluates this approach. The main goal is to provide quantitative forecasts for various performance measures of waste management systems. They include availability, downtimes, number of failures, and cost. Evaluation of these measures is important for optimal decision making. The system design should both maximise the system performance leading to cleaner processing and minimise the overall cost within the allowable constraints. The effectiveness of this methodology is demonstrated through a case study.