Pig slurry concentration by vacuum evaporation: influence of previous mesophilic anaerobic digestion process

Water can be removed from pig slurry by evaporation, through the application of wasted heat from a power plant or from other processes. Apart from obtaining a concentrate with an obviously higher nutrient concentration than the original slurry, another objective of water removal is to obtain water as condensate, which could be reused. The objective of this work was to study the vacuum evaporation of pig slurry liquid fraction and to evaluate condensate composition as a function of both pH (4, 5, and 6) and pig slurry type (fresh slurry and anaerobically digested slurry). Batch experiments showed that condensate characteristics, total ammonia nitrogen (NH3-N), volatile fatty acids (VFA), and chemical oxygen demand were strongly dependent on initial slurry pH. In addition to producing part of the required thermal energy, previous anaerobic digestion presented several other clear advantages. The consumption of VFA and other volatile organic compounds during anaerobic digestion reduced the volatilization of organic matter in the evaporation treatment and, consequently, provided a higher quality condensate.     

Slaughterhouse wastewater treatment in a full-scale system with constructed wetlands.

This work evaluated the performance of a full-scale system with wetlands for slaughterhouse (abattoir) effluent treatment in the State of Hidalgo, México. The treatment system consisted of a primary sedimentation tank, an anaerobic lagoon, and a constructed subsurface-flow wetland, in series. The wetland accounted for almost 30% of the removal of organic matter. In general, the treatment system achieved satisfactory pollutant removals, but the final effluent could not meet the Mexican environmental regulations for fecal coliform counts, five-day biochemical oxygen demand (BOD5), and total suspended solids (TSS). Overall, removal levels were 91%, 89%, and 85% for BOD5, chemical oxygen demand, and TSS, respectively. However, BOD5 in the final effluent (137 mg/L) was higher than the maximum level of 30 mg/L allowed by the regulatory agency. Although organic nitrogen removal levels were approximately 80%, the nitrogen persisted in oxidation state -3 as ammonia-nitrogen, the removal of which was only 9% in the wetland stage. On average, phosphorus removal was null, and, on occasion, the phosphorus concentration in the treated effluent was higher than that of the influent. Coliform reductions in the overall system were high (on the order of 5 logs on average), whereas the coliform removal in the wetland was between 2 to 3.5 logs. The treatment system was also effective at removing pathogens (Vibrio cholerae, Salmonella, and Shigella). Further laboratory tests with the wetland effluent suggest that post treatment in a sand filter stage followed by disinfection with sodium hypochlorite (NaOCl) could help meet the Mexican discharge regulations, particularly the criteria for coliforms and total BOD5.     

Analysis of dioxin-like compounds in vegetation and soil samples burned in Catalan forest fires. Comparison with the corresponding unburned material

Only a few data are reported about the formation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in forest fires. However, the inventories of sources undertaken by several European and American countries consider natural fires as a possible source of PCDD/F and, in some cases, as one of the most important. In our work we have analysed vegetation and soil samples burned in four forest fires which happened in Catalonia in the summer of 1998. The concentration of dioxin-like compounds (PCDD/F, non-ortho polychlorinated bi-phenyls (PCB) and mono-ortho PCB) has been compared to the concentration present in the corresponding unburned material collected in places near the fires but not affected. The results of this preliminary study show very low concentrations in all the samples, both burned and unburned. Although a change in the profile (proportional increase of tetrachlorinated congeners in PCDD/F) is observed in burned samples compared to unburned ones, the absolute values of concentration decrease in most samples. Therefore, natural fires seem not to be an important source of dioxin-like compounds. These results will be confirmed with air emissions measurements in future studies.     

Implementing environmental with other standardized management systems: Scope,sequence, time and integration

The aim of this article is to analyze how the implementation of the environmental management system (EMS) in accordance with the ISO 14001: 2004 standard has been carried out in organizations having more than one standardized Management System (MSs). In particular, four implementation aspects will be discussed, namely the different management system standards (MSSs) used for registration, for example ISO 14001, ISO 9001, OHSAS 18001, ISO 27001 and SA 8000, the order in which they were implemented, the time required for each implementation, as well as the scope of integration of these MSSs into a single Integrated Management System (IMS).In order to do so, some of the results of a survey carried out in 176 organizations registered to, at a minimum, both ISO 14001: 2004 and ISO 9001: 2000 standards for environmental and quality management, respectively, are presented. As one of the few existing empirical studies regarding the integration of multiple MSs, this research reveals the importance of the different possibilities which organizations can opt for when considering EMS implementation. For example, while most respondents implemented ISO 9001 before ISO 14001, others did so simultaneously or even applied ISO 14001 first. Furthermore, although a large majority of organizations integrated their EMS with additional standardized MSs, a small percentage did not. Apart from illustrating the survey outcomes, the article contains a detailed case analysis of four specific organizations with high environmental awareness that have implemented quality and other standardized MSs.     

Baseline levels of bioaerosols and volatile organic compounds around a municipal waste incinerator prior to the construction of a mechanical-biological treatment plant

New waste management programs are currently aimed at developing alternative treatment technologies such as mechanical–biological treatment (MBT) and composting plants. However, there is still a high uncertainty concerning the chemical and microbiological risks for human health, not only for workers of these facilities, but also for the population living in the neighborhood. A new MBT plant is planned to be constructed adjacently to a municipal solid waste incinerator (MSWI) in Tarragona (Catalonia, Spain). In order to evaluate its potential impact and to differentiate the impacts of MSWI from those of the MBT when the latter is operative, a pre-operational survey was initiated by determining the concentrations of 20 volatile organic compounds (VOCs) and bioaerosols (total bacteria, Gram-negative bacteria, fungi and Aspergillus fumigatus) in airborne samples around the MSWI. The results indicated that the current concentrations of bioaerosols (ranges: 382–3882, 18–790, 44–926, and <1–7 CFU/m³ for fungi at 25 °C, fungi at 37 °C, total bacteria, and Gram-negative bacteria, respectively) and VOCs (ranging from 0.9 to 121.2 μg/m³) are very low in comparison to reported levels in indoor and outdoor air in composting and MBT plants, as well in urban and industrial zones. With the exception of total bacteria, no correlations were observed between the environmental concentrations of biological agents and the direction/distance from the facility. However, total bacteria presented significantly higher levels downwind. Moreover, a non-significant increase of VOCs was detected in sites closer to the incinerator, which means that the MSWI could have a very minor impact on the surrounding environment.     

Response of the Mediterranean sponge Chondrosia reniformis Nardo to copper pollution

We examined the effects of exposure to copper pollution on the Atlanto-Mediterranean sponge Chondrosia reniformis. We transplanted sponges from an unpolluted control area to a harbour with a moderately high concentration of copper and measured several biological sponge variables. No effect of this habitat was detected on sponge growth, shape, heat-shock protein expression or metal accumulation. However, a decrease in the clearance rate, an increase in the collagen/cell rate (due to a decrease in the cellular components) and a lower survival rate after 4 months of the sponges transplanted to the harbour was observed. We suggest that copper may alter the sponge physiology, by reducing pumping capacity, which may ultimately lead to sponge death. Consequently, copper pollution exerts strong negative effects on this organism.     

Heavy metals contents in agricultural topsoils in the Ebro basin (Spain). Application of the multivariate geoestatistical methods to study spatial variations

In this work the content of seven heavy metals (Cd, Cr, Cu, Hg, Ni, Pb and Zn) and other parameters (the pH, organic matter, carbonates and granulometric fraction) in agricultural topsoil in the Ebro basin are quantified, based on 624 samples collected according to an 8 by 8 km square mesh. The average concentrations (mg/kg) obtained were: Cd 0.415+/-0.163, Cr 20.27+/-13.21, Cu 17.33+/-14.97, Ni 20.50+/-22.71, Pb 17.54+/-10.41, Zn 17.53+/-24.19 and Hg 35.6+/-42.05 microg/kg. The concentration levels are relatively low in areas of high pH and low organic matter content concentration. The results of factor analysis group Cd, Cu, Hg, Pb and Zn in F1 and Cr y Ni in F2. The spatial heavy metals component maps based on geostatistical analysis, show definite association of these factors with the soil parent material. The local anomalies (found in Cu, Zn and Pb) are attributed to anthropogenic influence.     

Environmental management and firm performance: a case study

This study has as its aim to help to clarify the relationship between environmental management and economic performance by integrating it into a wider framework that includes the relationship between environmental strategy and firm performance, the latter being understood as the combination of environmental performance, competitive advantage and economic performance. A case study of the COATO farming cooperative showed us that its environmental management, focused on prevention logic, has had a positive net effect on its environmental performance. Besides, the order in which these practices were adopted favoured the development of new organisational capabilities that have contributed to the appearance of advantages derived from the greater accumulated experience of employees in creating new projects that are designed to reduce residues and pollution. COATO has also obtained a competitive advantage in differentiation thanks to an improved brand image and to its increased credibility in business relationships. Finally, a positive correlation exists between the pioneering proactive strategy adopted by this cooperative and the improvement of its firm performance with respect to the other firms in its sector.     

Co-digestion of pig manure and glycerine: experimental and modelling study

It is a fact that the rapid increase of biodiesel production over the last years has resulted in the generation of large and constant amounts of glycerine, which is causing an oversupply problem. Since glycerine is a biodegradable organic compound exempt of nitrogen, it can be applied as a co-substrate in the anaerobic digestion process of pig manure (PM). In order to analyze the feasibility of a mixture of pig manure and glycerine in anaerobic processes and to define the effect originated by the nitrogen limitation when large amounts of glycerine are added, several biodegradability batch tests were performed with different mixtures. These were named as: 100% PM, 80% PM, 60% PM, 40% PM and 20% PM, in pig manure wet weight-basis. Furthermore, a modified model based on anaerobic digestion model no.1 (ADM1) was used to simulate the methane production profiles for the mixtures tested. Specifically, both experimental and model results show the power of the co-digestion technology. In particular, the mixture of 80% PM produced the highest methane production with 215 mL CH(4) g(-1) COD, almost 125% more methane than when pig manure was mono-digested. In contrast, the one with 20% PM was clearly inhibited by the volatile fatty acid due to the low nitrogen concentration of the mixture. In addition, the specific methane production predicted by the model was in good agreement with the experimental results, although in some samples the shape of the profiles did not match perfectly. Moreover, the modified ADM1 appears to be a useful tool to predict the methane production and the limitations related to the lack/excess of nitrogen during the co-digestion process of pig manure and glycerine.