Wastewater quality of natural gas fertilizer factory, Fenchuganj and water quality of Kushiara River at the down stream

The physical, chemical and biological characteristics of the wastewater of Natural Gas Fertilizer Factory Ltd. Fenchuganj, Sylhet were determined through extensive laboratory tests in the months of March, July, October and December of the year 2005. Concentration of Suspended Solids was within the range of 445 to 950 mg/L. Bangladesh Industrial Effluent Standards for Suspended Solids is 100 mg/L. Suspended Solids were found above the limit in all the samples. Concentration of Dissolved Solids was found to vary from 576 to 1,456 mg/L. Bangladesh Industrial Effluent Standards, for Dissolved Solids is 2,100 mg/L. Dissolved Solids were found within the limit. Concentration of BOD(5) was found to vary from 4.5 to 8.4 mg/L. Bangladesh Industrial Effluent Standards for BOD(5) is 50 mg/L. For the year 2005, the BOD(5) was found below the limit in all the samples. Dissolved Oxygen of the wastewater was found to be between 2.0 to 3.0 mg/L, which do not satisfy the standard (4.5-8 mg/L). Oil and grease concentration were found in the range of 28 to 68 mg/L, whereas the standard is 10 mg/L for discharge into the inland surface water. In 2005, concentration of Cr(+ 6) was found to vary from 0.01 to 0.156 mg/L in the wastewater. Bangladesh Industrial Effluent Standards, for Cr(+6) is 0.1 mg/L. The concentration of chromium was found above the limit in three samples. Concentration of NO(3) was found to vary from 4.5 to 15.2 mg/L in the wastewater. Bangladesh Industrial Effluent Standards for nitrate is 10 mg/L. The nitrate was found above the limit in three samples. Maximum concentration of ammonia in lagoon 1 was found 1,710 mg/L in month of December. Bangladesh Industrial Effluent Standards for ammonia nitrogen is 100 mg/L. For the year 2005, the ammonia nitrogen was found above the limit in all samples.     

Effect of metal tolerant plant growth promoting Bradyrhizobium sp. (vigna) on growth, symbiosis, seed yield and metal uptake by greengram plants

The nickel and zinc tolerant plant growth promoting Bradyrhizobium sp. (vigna) RM8 was isolated from nodules of greengram, grown in metal contaminated Indian soils. The plant growth promoting (PGP) potentials of strain RM8 was assessed both in the presence and absence of nickel and zinc under in vitro conditions. Strain RM8 tolerated a high level of nickel (300 microg ml(-1)) and zinc (1400 microg ml(-1)) on yeast extract mannitol agar medium. Bradyrhizobium sp. (vigna) strain RM8 produced 13.3 microg ml(-1) of indole acetic acid in Luria Bertani broth at 100 microg ml(-1) of tryptophan which increased to 13.6 microg ml(-1) at 50 microg Ni ml(-1) and 13.5 microg ml(-1) at 300 microg Zn ml(-1). Strain RM8 was positive for siderophore, HCN and ammonia both in the absence and presence of nickel and zinc. The PGP activity of this strain was further evaluated with increasing concentrations of nickel and zinc using greengram as a test crop. The bioinoculant enhanced the nodule numbers by 82%, leghaemoglobin by 120%, seed yield by 34%, grain protein by 13%, root N by 41% and shoot N by 37% at 290 mg Ni kg(-1) soil. At 4890 mg Zn kg(-1) soil, the bioinoculant increased the nodule numbers by 50%, leghaemoglobin by 100%, seed yield by 36%, grain protein by 13%, root N by 47% and shoot N by 42%. The bioinoculant strain RM8 reduced the uptake of nickel and zinc by plant organs compared to plants grown in the absence of bioinoculant. This study suggested that the bioinoculant due to its intrinsic abilities of growth promotion and attenuation of the toxic effects of nickel and zinc could be exploited for remediation of metal from nickel and zinc contaminated sites.     

Groundwater vulnerability assessment using DRASTIC and Pesticide DRASTIC models in intense agriculture area of the Gangetic plains,India

Delineating areas susceptible to contamination from anthropogenic sources form an important component of sustainable management of groundwater resources. The present research aims at estimating vulnerability of groundwater by application of DRASTIC and Pesticide DRASTIC models in the southern part of the Gangetic plains in the state of Bihar. The DRASTIC and Pesticide DRASTIC models have considered seven parameters viz. depth to water level, net recharge, aquifer material, soil material, topography, impact of vadose zone and hydraulic conductivity. A third model, Pesticide DRASTIC LU has been adopted by adding land use as an additional parameter, to assess its impact on vulnerability zonation. The DRASTIC model indicated two vulnerable categories, moderate and high, while the Pesticide DRASTIC model revealed moderate, high and very high vulnerable categories. Out of the parameters used, depth to water level affected the vulnerability most. The parameter caused least impact was topography in DRASTIC, while in case of Pesticide DRASTIC and Pesticide DRASTIC LU models, the parameter was hydraulic conductivity. A linear regression between groundwater NO₃ concentrations and the vulnerability zonation revealed better correlation for Pesticide DRASTIC model, emphasising the effectiveness of the model in assessing groundwater vulnerability in the study region. Considering all three models, the most vulnerable areas were found to be concentrated mainly in two zones, (i) in the south-western part along Ekangarsarai-Islampur patch and (ii) around Biharsharif-Nagarnausa area in the central part. Both zones were characterised by intensive vegetable cultivation with urban areas in between.     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

Feasibility study of rainwater harvesting system in Sylhet City

In rural areas in Bangladesh, groundwater is the principal source of water supply. This underground water is available in considerable amount in shallow aquifers. It is free from pathogenic microorganisms and hence water-borne diseases. In plain lands, other than hilly areas, water supply to 97% rural population comes from tube-wells, which is regarded to be a phenomenal achievement in preserving public health. Besides, a dependable water supply system all throughout the country is offset by two factors: (a) high salinity in surface plus groundwater in coastal areas; (b) want of suitable groundwater aquifers in hilly areas and the high cost of setting up tube-wells due to deep underground water table and stony layers. However, presence of arsenic in underground water now poses a serious threat to the success once made in water supply by setting up of manually operated tube-wells in the village areas—the achievement is now on the brink of total collapse. In about 61 districts out of 64, presence of arsenic exceeds a quantity of 0.05 mg/1, a permissible limit as per Bangladeshi water quality standard. Harvesting rainwater can be a pragmatic solution to this problem, which is common in many places in Sylhet especially in the hilly areas on the north eastern part of the city. This can be an alternative source of drinking water because of availability of rainwater from March to October. Heavy rain occurs from end of May till mid September, which is commonly known as the rainy season. This paper focuses on the possibility of harvesting rainwater in rural communities and thickly populated urban areas of Sylhet. It also demonstrates the scopes of harvesting rainwater using simple and low-cost technology. With setting up of a carefully planned rainwater storage tank, a family can have all of its drinking water from rain. Planned use of rainwater through rainwater harvesting in the roof catchments may fulfill the entire annual domestic water demand of a family in the rural areas of Bangladesh.     

Bioremediation of tannery effluent by Cr- and salt-tolerant bacterial strains

Microorganisms have great potential to control environmental pollution, particularly industrial sources of water pollution. Currently, leather industry is regarded as the most polluting and suffering from negative impacts due to the pollution it adds to the environment. Chromium, one of the hazardous pollutants discharged from tanneries, is highly toxic and carcinogenic in nature. Effective treatment of tannery effluent is a dire need of the era as a part of environmental management. Among all the wastewater treatment technologies, bioremediation is the most effective and environment-friendly tool to manage the water pollution. The present study evaluated the potential of 11 previously isolated bacterial strains, tolerant to high concentrations of salts and Cr for the bioremediation of tannery effluent. Among all the tested strains, Enterobacter sp. HU38, Microbacterium arborescens HU33, and Pantoea stewartii ASI11 were found most effective in reducing biological oxygen demand (BOD), chemical oxygen demand (COD), total dissolved solids (TDS), total suspended solids (TSS), and chromium (Cr) 70, 63, 57, 87, and 54%, respectively, of tannery effluent and proliferated well under highly toxic conditions, at 9 days of incubation. The pollutant removal efficacy of these bacterial strains can be improved by extending the incubation period or by increasing the amount of inoculum.     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Utilization of Cellulosic Wastes in Textile and Garment Industries: 2. Synthesis and Characterization of Cellulose Acetate from Knitted Rag

Cellulose acetate (CA) was synthesized from knitted rag, a cellulosic waste of Textile and Garment industries, in the glacial acetic acid, and subsequently acetic anhydride (Ac₂O) in presence of concentrated H₂SO₄ reaction medium. A low to high substitution products were obtained from single step up to seven steps acetylation of cellulose. In this way, it was possible to produce low cost and different grades or substituted acetylation derivatives of cellulose. The synthesized CA was characterized and investigation of its physical characteristics was done. Solubility, acetyl content, acetic acid content, degree of substitution, and molecular weight of CA increased gradually with the increase of the number of reaction steps attaining optimum value at the fourth step. The acetyl and acetic acid content of CA were increased from 39.95 % to 44.25 %, and from 55.73 % to 61.73 % respectively. Similarly, degree of substitution and molecular weight of CA were increased from 2.47 to 2.94, and from 74,249 to 121,437 respectively.