Influence of surfactant concentration on foliar retention of pesticides used in forestry

Abstract

Aqueous tank mixes of permethrin, fenitrothion, Bacillus thuringiensis (B.t.), diflubenzuron (DFB), and glyphosate containing different amounts of Triton® X‐114, a nonionic surfactant, were prepared. Glyphosate formed clear solutions, permethrin and fenitrothion formed emulsions, DFB and B.t provided suspensions. Emulsion stability of permethrin and fenitrothion increased with increasing surfactant level, while the emulsion drop size decreased.

Foliage of white oak, trembling aspen, white spruce and balsam fir were dipped in tank mixes of pesticides (except B.t.) labelled with ¹⁴carbon. The amount of pesticide retained on foliage was determined by liquid scintillation counting. Foliage was also dipped in non‐radioactive B.t. tank mixes, and the protein retained was determined colorimetrically. With all tank mixes, a direct relationship was observed between the mass of liquids retained on foliage and liquid viscosity. In contrast, the amount of pesticide retained was unaffected by viscosity, but was influenced by emulsion drop size. Initially, the amount of pesticide retained on foliage increased with increasing surfactant concentration. Beyond an optimum surfactant level, the emulsion drop sizes were too small and the emulsions became too stable to allow maximum retention of pesticides on foliage. With the glyphosate solutions, however, no optimum surfactant level was indicated because foliar concentrations continued to increase with increasing surfactant levels.     

Optimization of digestion parameters for analysing the total sulphur of mine tailings by inductively coupled plasma optical emission spectrometry

The oxidation of sulphidic mine tailings and consequent acid generation poses challenges for the environment. Accurate and precise analysis of sulphur content is necessary for impact assessment and management of mine tailings. Here, the authors aim at developing a rapid and easy digestion procedure, which may analyse and measure the total amount of sulphur in mine tailings by using inductively coupled plasma. For evaluating effects of several variables, the researchers used a univariate (analysis of variance (ANOVA)) strategy and considered factors such as composition of the acid mixture, heating time, and refluxing device to optimize the performance. To do the experiment, the researchers have used two certified reference materials (KZK-1 and RTS-2) and samples of tailings from Musselwhite mine. ANOVA result shows that heating time is the most influencing factor on acid digestion of the reference materials whereas in case of a digestion of tailings sample, hydrochloric acid proved to be the most significant parameter. Satisfactory results between the measured and referenced values are found for all experiments. It is found that the aqua regia (1 ml HNO₃ + 3 ml HCl) digestion of 0.1 g of samples after only 40 min of heating at 95°C produced fast, safe, and accurate analytical results with a recovery of 97% for the selected reference materials.     

Soil quality index as affected by different cropping systems in northwestern Himalayas

Soil quality assessment provides a tool for evaluating the sustainability of soils under different crop cafeterias. Our objective was to develop the soil quality index for evaluating the soil quality indicators under different cropping systems in northwest Himalaya-India. Composite soil samples were taken from the study area from different cropping systems which include T₁ (forest soil control), T₂ (rice-oilseed, lower belts), T₃ (rice-oilseed, higher belts), T₄ (rice-oats), T₅ (rice-fallow), T₆ (maize-oats), T₇ (maize-peas), T₈ (apple), T₉ (apple-beans), and T₁₀ (apple-maize). Physical, chemical, and biological soil indicators were determined, and it was found that soil enzyme activities involved in nutrient cycling were significantly higher in forest soils, which were reflected in higher levels of available pool of nutrients. Carbon stocks were found significantly higher in forest soil which was translated in improved soil physical condition. Principal component analysis (PCA) was performed to reduce multidimensionality of data followed by scoring by homothetic transformation of the selected indicators. Pearson’s interclass correlation was performed to avoid redundancy, and highly correlated variables were not retained. Inclusion of legumes in the apple orchard floor recorded highest soil quality rating across the treatments. Cereal-based cropping systems were found in lower soil quality rating; however, the incorporation of peas in the system improved soil health.     

Bubble size distribution in a laboratory-scale electroflotation study

The performance of electroflotation (EF) is strongly influenced by the size of O₂ and H₂ bubbles. Therefore, in this study, the bubble sizes are measured in a lab-scale EF cell using a high-speed camera. The mean bubble size is found to vary in the range of 32.7–68.6 μm under different operating conditions. This study shows that the electrode material, current density, water pH, ionic strength, and frother (Tennafroth 250) concentration are important factors in controlling the bubble size. Furthermore, four mathematical distributions (normal, log-normal, Weibull, and gamma distributions) are fitted to the experimental data, among which the log-normal distribution is found to be the best fit based on the lower Anderson-Darling (AD) value.     

Phosphorous in the environment: characteristics with distribution and effects,removal mechanisms,treatment technologies,and factors affecting recovery as minerals in natural and engineered systems

Environmental Science and Pollution Research - Phosphorus (P), an essential element for living cells, is present in different soluble and adsorbed chemical forms found in soil, sediment, and water....     

Environmental factors affecting the frequency of road traffic accidents: a case study of sub-urban area of Pakistan

Road traffic accidents (RTAs) are among the life-threatening issues facing rural as well as sub-/urban communities. Several factors contribute to RTAs ranging from human to technical and natural/environmental impacts. Anthropogenic air pollution and corresponding environmental factors also increase the probability of RTAs. Current study reports the relationship of the weather conditions to RTAs. The study establishes the relevancy of different weather conditions like rainfall, temperature, fog, and wind storm with the incidences of RTAs in rural and urban settings of Vehari, Punjab—Pakistan. The results of the study showed that rainfall, severe coldness, fog, and heat conditions were directly related with the occurrence of RTAs. The percentage of RTAs which occurred due to fog, rainfall, temperature, and other weather-related factors was 34, 25, 21, and 20%, respectively. The age of the driver significantly correlated (R²?=?0.60) with RTAs; the drivers in the age group 40–60 years caused the least RTAs during their drive. Since the smaller vehicles were involved in maximum RTAs, it relates negatively (R²?=?0.82) to vehicles power. Among different vehicles motor bikes were involved in most (42%) of the reported RTAs. Therefore, during severe weather conditions, vehicles with smaller size and young drivers must be dealt with carefully while interacting (crossing, overtaking, and maneuvering) on the roads regardless of rural or urban conditions. Factors including civic sense, traffic education, vehicle size, drivers’ maturity, road conditions, and environmental impacts may be considered while designing traffic rules and traffic aware campaigns specific for developing countries such as Pakistan.

     

Role of ambient air pollution in asthma spread among various population groups of Lahore City: a case study

Environmental Science and Pollution Research - Air pollution levels rise as a result of industrial and vehicular emissions, epidemiological issues such as asthma become more prevalent in Lahore,...     

Evaluation of fungal potentiality for bioconversion of domestic wastewater sludge

This study was undertaken to screen the filamentous fungi isolated from its relevant habitats (wastewater, sewage sludge and sludge cake) for the bioconversion of domestic wastewater sludge. A total of 35 fungal strains were tested against wastewater sludge (total suspended solids, TSS 1%-5% w/w) to evaluate its potentiality for enhancing the biodegradability and dewaterability using liquid state bioconversion(LSB) process. The strains were divided into five groups i. e. Penicillium, Aspergillus, Trichoderma, Basidiomycete and Miscellaneous, respectively. The strains WWZP1003, SCahmA103, SCahmT105 and PC-9 among their respective groups of Penicillium,Aspergillus, Trichoderma and Basidiomycete played potential roles in terms of separation (formation of pellets/flocs/filaments),biodegradation(removal of COD) and filtration(filterability) of treated domestic wastewater sludge. The Miscellaneous group was not considered due to its unsatisfactory results as compared to the other groups. The pH value was also influenced by the microbial treatment during fermentation process. The filterability of treated sludge was improved by fungal treatment, and lowest filtration time was recorded for the strain WWZP1003 and SCahmA103 of Penicillium and Aspergillus groups respectively compared with other strains.     

Organochlorine pesticides in the surrounding soils of POPs destruction facility: source fingerprinting,human health,and ecological risks assessment

Environmental Science and Pollution Research - The elimination of persistent organic pollutants (POPs) obsolete pesticides stockpiles, particularly the organochlorine pesticides (OCPs), is one of...     

Biogeochemical transformation of greenhouse gas emissions from terrestrial to atmospheric environment and potential feedback to climate forcing

Environmental Science and Pollution Research - Carbon dioxide (CO2) is mainly universal greenhouse gas associated with climate change. However, beyond CO2, some other greenhouse gases (GHGs) like...