A critical review on different roughness geometries and their effect on heat transfer and friction factor

Solar air heater (SAH) is simple and the greatest effective approach to utilize and convert solar energy into thermal energy for heating utilizations. The employment of artificial roughness under side of the observer surface is the key technique for augmenting heat transfer with minimal friction factor penalty. Current paper summarized different kinds of artificial roughness used in SAH, which augments its performance. In this review article, 96 research papers are cited, which provide detailed information about the effect of different geometrical parameters on heat transfer and friction factor. This paper also brings the information about the optimum roughness parameters and heat transfer and friction factor correlation developed by different investigators in tabular form. Optimum roughness parameters and empirical correlations are used for comparative analysis of heat transfer, friction factor, and thermo-hydraulic performance parameter (THPP) of different roughness geometries. The best performing roughness geometry is reported on the basis of comparative analysis. Mathematical model is developed for predicting the thermal efficiency (η_th) of roughened SAH duct.

     

In vivo and in vitro control activity of plant essential oils against three strains of Aspergillus niger

Environmental Science and Pollution Research - Contamination of environment and food from the prevalent spores and mycotoxins of Aspergillus niger has led to several diseases in humans and other...     

Occurrences and fate of selected human antibiotics in influents and effluents of sewage treatment plant and effluent-receiving river Yamuna in Delhi (India)

Antibiotics consumption has increased worldwide, and their residues are frequently reported in aquatic environments. It is believed that antibiotics reach aquatic water bodies through sewage. Medicine consumed for healthcare practices are often released into sewage, and after sewage treatment plant, it reaches the receiving water bodies of lakes or rivers. In the present study, we determined the fate of some commonly used antibiotics in a sewage treatment plant (STP) located in Delhi and the environmental concentration of these antibiotics in the Yamuna River, which receives the sewage and industrial effluent of Delhi. There are many reports on antibiotics occurrences in STP and river water worldwide, but monitoring data from the Indian subcontinent is sparse. Samples were taken from a STP and from six sampling sites on the Yamuna River. Several antibiotics were tested for using offline solid-phase extraction followed by high-performance liquid chromatography equipped with photodiode array analysis. Recoveries varied from 25.5–108.8 %. Ampicillin had the maximum concentration in wastewater influents (104.2?±?98.11 μg l^?1) and effluents (12.68?±?8.38 μg l^?1). The fluoroquinolones and cephalosporins had the lower concentrations. Treatment efficiencies varied between 55 and 99 %. Significant amounts of antibiotics were discharged in effluents and were detected in the receiving water body. The concentration of antibiotics in the Yamuna River varied from not detected to 13.75 μg l^?1 (ampicillin) for the compounds investigated.     

Hazard Perception Based on Safety Words and Colors: An Indian Perspective

Globalization and trade among developed and developing countries has increased the need of risk communication at the workplace. The purpose of this study was to examine differences in risk communication and perception in various countries. It looked at hazard perception associated with colors and safety words among Indian industry workers. Fifty workers participated in the study focused on hazard rating of 9 safety words and 7 colors. In one part of the study the participants were asked to associate colors with safety words through recalling them from their long-term memory; in another they were asked to associate safety words with given colors. The results showed that certain words and colors implied different hazard rating at the workplace. The rank ordering of safety words and colors varied significantly in different countries. Hence population factors should be taken into consideration when designing standards for hazard communication.     

Nanosensors and nanobiosensors in food and agriculture

The food and agriculture sector controls the economic growth of a developing country. The food industries have practices of growing crops, raising livestock and sea foods, food processing and packaging, regulating production and distribution with quality and safety. The process control and monitoring quality are crucial steps. Here we review nanosensors and nanobiosensors as alternative of classical quantification methods. Nanoscale dimensions of metal nanoparticles, metal nanoclusters, metal oxide nanoparticles, metal and carbon quantum dots, graphene, carbon nanotubes, and nanocomposites expand the sensitivity by signal amplification and integrate several novel transduction principles such as enhanced electrochemical, optical, Raman, enhanced catalytic activity, and superparamagnetic properties into the nanosensors. The electrochemical nanosensors, optical nanosensors, electronic nose and electronic tongue, nanobarcode technology, and wireless nanosensors have revolutionized the sensing in food and agriculture sectors with multiplex and real-time sensing capabilities. Despite previous success stories of the remunerative health sector, the approaches are transferred subsequently to food and agriculture sector; with potential application in detection of food contaminants such as preservatives, antibiotics, heavy metal ions, toxins, microbial load, and pathogens along with the rapid monitoring of temperature, traceability, humidity, gas, and aroma of the food stuff.     

Pesticide residues in Indian raw honeys,an indicator of environmental pollution

Honey has multifaceted beneficial properties, but polluted environment and unapproved apicultural practices have led to its contamination. In this study, QuEChERS method followed by chromatographic analysis by GC-μECD/FTD and GC-MS was validated and used for determination of 24 pesticides in 100 raw honey samples from various floral origins of Northern India. Matrix-matched calibrations showed that the method was selective and linear (r²?>?0.99) with detection limit <?9.1 ng g^?1 for all the studied pesticides except for monocrotophos (21.3 ng g^?1). The average recoveries at different fortification levels ranged from 86.0 to 107.7% with relative standard deviation <?20%. Pesticide residues were detected in 19.0% samples, and most prevalent compounds detected were dichlorvos in 6.0% samples followed by monocrotophos (5.0%), profenofos (5.0%), permethrin (4.0%), ethion (3.0%), and lindane (3.0%) with concentrations ranging from 58.8 to 225.5, from 96.0 to 430.1, from 14.6 to 43.2, from 27.8 to 39.6, from 25.6 to 28.0, and from 19.6 to 99.2 ng g^?1, respectively. Honey samples originating from cotton, sunflower, and mustard crops (33.3%) that tested positive for pesticide residues were found to be significantly higher (p?<?0.05) than the honey originating from natural and fruity vegetation (13.5%). Therefore, considering the contamination of environmental compartments due to extensive application of pesticides in the study area and their potential for subsequent transfer to honey by the expeditious bees, the results of present study proclaim that honey may be used as an indicator of environmental pollution. Further, estimated daily intakes of all contaminants were found to be at levels well below their acceptable daily intakes suggesting that consumption of honeys at current levels does not pose deleterious effects on human health. However, precautionary measures should always be taken considering the customary honey feeding in infants and cumulative effect of these chemicals in the foreseeable future.     

Improved Version of Anion-exchange Resin-based Desulfurization Process for Alkali Metal Sulfates

Abstract

Vehicle gaseous emissions (NO, CO, CO₂, and hydrocarbon [HC]) and driver’s particle exposures (particulate matter <1 μm [PM₁], <2.5 μm [PM_2.5], and<10 μm [PM₁₀]) were measured using a mobile laboratory to follow a wide variety of vehicles during very heavy traffic congestion in Macao, Special Administrative Region, People’s Republic of China, an urban area having one of the highest population densities in the world. The measurements were taken with high time resolution so that fluctuations in the emissions can be seen readily during vehicle acceleration, cruising, deceleration, and idling. The tests were conducted in close proximity to the vehicles, with the inlet of a five-gas analyzer mounted on the front bumper of the mobile laboratory, and the distance between the vehicles was usually within several meters. To measure the driver’s particle exposures, the inlets of the particle analyzers were mounted at the height of the driver’s breathing position in the mobile laboratory, with the driver’s window open. A total of 178 and 113 vehicles were followed individually to determine the gaseous emission factor and the driver’s particle exposures, respectively, for motorcycle, passenger car, taxi, truck, and bus. The gaseous emission factors were used to model the roadside air quality, and good correlations between the modeled and monitored CO, NO₂, and nitrogen oxide (NO_x) verified the reliability of the experiments. Compared with petrol passenger cars and petrol trucks, diesel taxies and diesel trucks emitted less CO but more NO_x. The impact of urban canyons is shown to cause a significant increase in the PM₁ peak. The background concentrations contributed a significant amount of the driver’s particle exposures.     

Effect of on-site sanitation on groundwater contamination in basaltic environment ’A case study from India

On-site sanitation is increasingly adopted in urban cities in India. The adoption of On-site sanitation system puts the groundwater resources in the vicinity of the system at a greater risk. Microbial contaminants as well as chemical contaminants like Chloride and Nitrate are generated from human waste. These contaminants travel through the medium and ultimately get in contact with the groundwater. Hence, the groundwater sources are vulnerable to nitrate contamination near the On-site sanitation systems. The present study indicates significant Nitrate and Chloride contamination in samples collected close to On-site sanitation systems. The recommended limit set by the Bureau of Indian standards (BIS) limit of 45 mg/l for Nitrate concentration is also exceeded in few samples. The study indicates that Bacterial as well as Nitrate contamination is more in Monsoon as compared to Summer.     

Interlink between pollution and COVID-19 in India: compelling view and key attributes

Environmental Science and Pollution Research - Pollution and pollution-related consequences have a historic reputation, being even considered as chief causative agents behind several tragedies...