Heavy metals in organisms and sediments from Turkish Coast of the Black Sea, 1997-1998

During the period 1997-1998, macroalgae, sea snail, mussel, fish and sediment samples were collected at different stations of the Turkish Black Sea coast in order to establish the concentration of selected heavy metals. Heavy metals analyzed were Cd, Co, Cr, Ni, Zn, Fe, Mn, Pb and Cu. The results showed that the Turkish Black Sea coast is facing heavy metal pollution. The metal concentrations in macroalgae, sea snail, mussel and sediment samples are very high. However, Cd, Pb and Cu concentrations in anchovy fish decreased, while Co, Fe, Zn, Cr, Mn and Ni contents had changed when compared previous data. The metal levels in macroalgae did not follow the same pattern as concentrations in sediments at the same station. On the other hand, concentrations of Cd, Co, Cr, Zn, Fe, Mn and Cu in sea snail, mussel and fish samples were related to sediment data in the examined stations.     

Irrigation of broccoli and canola with boron- and selenium-laden effluent

Selenium (Se), boron (B), and salinity contamination of agricultural drainage water is potentially hazardous for water reuse strategies in central California. To demonstrate the feasibility of using plants to extract Se from drainage water, Se accumulation was determined in canola (Brassica napus L.) and broccoli (Brassica oleracea L.) irrigated with drainage effluent in the San Joaquin Valley, California. In the 2-yr field study, both crops were irrigated with a typical drainage water containing Se (150 microg L(-1)), B (5 mg L(-1)), and a sulfate dominated salinity (EC of 7 dS m(-1)). Total dry matter yields were at least 11 Mg ha(-1) for both canola and broccoli, and plant tissue Se concentrations did not exceed 7 mg kg(-1) DM for either crop. Based on the amount of soluble Se applied to crops with drainage water and the estimated amount of soluble Se remaining in soil to a depth of 90 cm at harvest, both canola and broccoli accumulated at least 40% of the estimated soluble Se lost from the soil for both years. Applied Se not accounted for in plant tissue or as soluble Se in the soil was presumably lost by biological volatilization. This study suggests that irrigating two high value crops such as canola and broccoli with Se-laden effluent helps manage Se-laden effluent requiring treatment, and also produces economically viable Se-enriched crops. Future research should focus on managing residual salt and B in the soil for sustaining long time water reuse strategies.     

Genotoxic biomonitoring study of population residing in pesticide contaminated regions in Göksu Delta: micronucleus, chromosomal aberrations and sister chromatid exchanges

Pesticides are widely used throughout the world in agriculture to protect crops and in public health to control diseases. Nevertheless, exposure to pesticides represents a potential risk to humans. This paper describes a study of possible genetic damage in the people living in regions contaminated with complex mixture of pesticides in G?ksu Delta. In this study, used methods were chromosomal aberration (CA), sister chromatid exchange analysis (SCE) in the peripheral blood lymphocytes, and micronucleus (MN) assay in the buccal epithelial cells. In the present investigation, 32 affected subjects consist of 16 smoking and 16 non-smokings and an equal number of control subjects were assessed for genome damage. Micronucleus (MN), Broken egg (BE), Karyorrhexis (KR), Karyolysis (KL) and Binucleus (BN) frequencies were higher in affected subjects than in controls. Smoking had a statistically significant effect on the Micronucleus, Karyorrhexis and Binucleus frequencies for both the control and the exposed group. Also smoking and exposure affected the frequency of sister chromatid exchange and chromosomal aberrations compared with control groups.     

Low SO2 emission from CFB co-firing MSW and bituminous

Influence of co-firing rate on SO2 emission from co-firing municipal solid waste(MSW) and bituminous containing high amount of sulfur(1.79%) was studied in a 0.15 MWt circulating fluidized bed (CFB). The temperature selected is 1123 K, typical for MSW incineration using CFB. The particle concentration in the dilution zone of the furnace, the alkali metal concentration and sulfate concentration in the recirculating ash and fly ash, and flue gas composition were determined. The results showed that the addition of MSW leads to a significant decrease in SO2 emission. Concentration of SO2 in flue gas decreased to 0 with the co-firing rate greater than 51%. This reduction in SO2 emission is attributed both to the high particle concentration in the dilution zone of the furnace, the high content of alkali metals in the bed material, and to the comparatively high concentration of HCI in flue gas during co-firing of MSW and bituminous.     

Individual preparedness and mitigation actions for a predicted earthquake in Istanbul

This study investigated the process of taking action to mitigate damage and prepare for an earthquake at the individual level. Its specific aim was to identify the factors that promote or inhibit individuals in this process. The study was conducted in Istanbul, Turkey—where an earthquake is expected soon—in May and June 2006 using qualitative methods. Within our conceptual framework, three different patterns emerged among the study subjects. Outcome expectancy, helplessness, a low socioeconomic level, a culture of negligence, a lack of trust, onset time/poor predictability, and normalisation bias inhibit individuals in this process, while location, direct personal experience, a higher education level, and social interaction promote them. Drawing on these findings, the paper details key points for better disaster communication, including whom to mobilise to reach target populations, such as individuals with direct earthquake experience and women.     

Optimization of carbon dioxide absorption in a continuous bubble column reactor using response surface methodology

Carbon dioxide absorption using amine based solvents is a well-known approach for carbon dioxide removal. Especially with the increasing concerns about greenhouse gas emissions, there is a need for an optimization approach capable of multifactor calibration and prediction of interactions. Since conventional methods based on empirical relations are not efficiently applicable, this study investigates use of Response Surface Methodology as a strong optimization tool. A bubble column reactor was used and the effect of solvent concentration (10.0, 20.0 and 30.0 vol%), flow rate (4.0, 5.0 and 6.0 L min⁻¹), diffuser pore size (0.5, 1.0 and 1.5 mm) and temperature (20.0, 25.0 and 30.0°C) on the absorption capacity and also overall mass transfer coefficient was evaluated. The optimization results for maintaining maximum capacity and overall mass transfer coefficient revealed that different optimization targets led to different tuned operational factors. Overall mass transfer coefficient decreased to 34.7 min⁻¹ when the maximum capacity was the desired target. High reaction rate along with the highest absorption capacity was set as desirable two factor target in this application. As a result, a third scenario was designed to maximize both mass transfer coefficient and absorption capacity simultaneously. The optimized condition was achieved when a gas flow rate of 5.9 L min⁻¹, MEA solution of 29.6 vol%, diffuser pore size of 0.5 mm and temperature of 20.6°C was adjusted. At this condition, mass transfer coefficient reached a maximum of 38.4 min⁻¹, with a forecasted achievable absorption capacity of 120.5 g CO₂ per kg MEA.     

Landfill leachate treatment by immediate one-step lime precipitation,carbonation, and phytoremediation fine-tuning

The high pollutant load of sanitary landfill leachates poses a huge challenge in the search for efficient and environment friendly solutions for their treatment. The objective of this work was to study an integrated solution of environmentally friendly technologies — immediate one-step lime precipitation (IOSLP), carbonation (CB), and phytoremediation (Phyt) — to treat a sanitary landfill leachate. In the leachate sample treatment by IOSLP, the influence of CaO concentration (18.2–33.3 g_CaO L^?1) and stirring time (2–60 min) on the sludge sedimentability and pollutant removal was studied. Organic load and ammonia nitrogen (AN) removal increases with CaO added, as well as sludge volume. Stirring time has a small influence on organic load and AN removal, presenting a minimum for sludge volume. Thus, the best operational conditions were chosen as 27.6 g_CaO L^?1, and 40-min stirring time, with 64% chemical oxygen demand (COD) removal. Sludge humidity was 2.1%, making dewatering needless. IOSLP supernatant was submitted to CB by atmospheric CO₂, and 100% removals in AN and hardness were attained. Effluents from IOSLP and IOSLP?+?CB were utilized in Phyt tests, with Vetiver (Chrysopogon zizanioides (L.) Roberty). The best COD removal (37%) during Phyt was attained for the samples treated by IOSLP?+?CB.

     

The biochemical activity of soil contaminated with fungicides

Excess fungicides can pose a serious threat to the soil environment. Fungicides can lower the microbiological and biochemical activity of soil and lead to yield declines. Soils contaminated with fungicides have to be remediated to maintain the optimal function of soil ecosystems. This study evaluates the effect of neutralizing substances on soil enzymatic activity and the yield of Triticum aestivum L. in soil contaminated with fungicides. Sandy loam (Eutric Cambisols) with pH_KCl 7.0 was contaminated with an aqueous solution of Amistar 250 SC and Falcon 460 EC in the following doses: 0 (soil without fungicide – treated as a control), RD (dose recommended by the manufacturer) and 300?×?RD (dose 300-fold higher than the recommended dose). Soil was supplemented with bentonite and basalt meal at a dose of 10?g kg^?1 DM of soil (dry mass of soil). The fungicide dose recommended by the manufacturer did not induce changes in soil enzymatic activity or the yield of T. aestivum L. Our findings indicate that the tested fungicides can be safely applied to protect crops against fungal pathogens. However, when applied at the dose of 300?×?RD, the tested fungicides strongly inhibited soil enzymatic activity and disrupted the growth and development of spring wheat. Soil supplementation with bentonite and basalt meal improved the yield of T. aestivum L., and bentonite was more effective in reducing fungicide stress. The analyzed substances were not highly effective in restoring biochemical homeostasis in soil.     

Simultaneous determination of iprodione,procymidone, and chlorflurenol in lake water and wastewater matrices by GC-MS after multivariate optimization of binary dispersive liquid-liquid microextraction

This study reports the optimization of a binary dispersive liquid-liquid microextraction method for the determination of iprodione, procymidone, and chlorflurenol by gas chromatography mass spectrometry. The study was aimed at using two extraction solvents to increase the extraction efficiency of all analytes. The binary solvents recorded results higher than the mono-solvents. After examining the effects of main experimental parameters and their interactions by analysis of variance, 200 μL of binary mixture (dichloromethane and 1,2-dichloroethane), 2.5 mL of ethanol, and 15 s vortex were obtained as optimum parameters. The detection and quantification limits calculated for the analytes were found to be between 0.30–1.6 and 1.0–5.3 ng/mL, respectively. Enhancement in detection power calculated as a ratio of the binary extraction detection limit to the detection limit of direct GC-MS analysis was 105-, 214-, and 233-fold for chlorflurenol, iprodione, and procymidone, respectively. In order to check the accuracy of the developed method, recovery study was performed. Water sampled from a lake and two wastewater samples from treatment facilities were spiked at two concentrations, and the percent recovery calculated for the samples ranged between 87 and 116%. These results confirmed the suitability of the method to real samples for accurate determination of the analytes at trace levels.