Surfactant solubilization of hydrophobic compounds in soil and water

The soil/water partition coefficient (K_d) of hexachlorobenzene (HCB) ranged from 220 1/kg to 1800 1/kg for eight soils having a wide range of physico-chemical properties. K_d normalised to soil organic carbon (K_oc) was found to be 28000 ± 4800 1/kg. Anionic surfactant dodecylsulphate (DS) present at concentrations above the critical micellar concentration (CMC) caused reductions in the apparent soil/water partition coefficient (K_d ^*) in the range of 3–26 times for most soils and up to 36–91 times for sandy soils. Below CMC, at environmentally relevant surfactant concentrations, K_d ^* was reduced by a factor of 1–13. For clay and calcareous soils significant adsorption/complexation/precipitation of DS occurred. At the lowest DS concentration this produced a two-fold increase in K_d ^*. At increasing DS concentrations this effect was shielded by the solubihzing effect from DS. Monomer (K_mn) and micellar (K_mc) surfactant/water partition coefficients for HCB were determined to be, 980 ± 190 1/kg and 21000 ± 1600 1/kg, respectively.     

Relationship between toxicity of certain organic compounds and their concentrations in tissues of aquatic organisms: A perspective

This paper explores the relationship between the toxicity of certain organic pollutants and their tissue concentration and suggests that the latter may be a more accurate predictor of toxicity than exposure concentration.     

Cadmium concentration in tobacco (Nicotiana tabacum L.) from different countries and its relationship with other elements

Cadmium accumulation in crop plants, such as tobacco (Nicotiana tabacum L.), can lead to human exposure to this carcinogenic metal. To better define actual Cd distribution in cured or processed tobacco leaves from chief tobacco-producing regions, we analyzed 755 leaf samples of three major types (Flue-cured, Burley, and Oriental) obtained from 13 countries during 2001-2003. This survey may help identify regions with low- or high-Cd concentrations in tobacco to obtain insight into the cause of the concentration extremes and to assist in defining strategies to reduce Cd in tobacco. Cadmium concentrations in the samples ranged from 0 to 6.78 microg g(-1), as determined by ICP-MS. Significant differences were found among types and among countries, but significant interactions between type and country were found. Variations in Cd concentrations were also found in all countries. Our results suggest an important contribution of the field (e.g., bioavailable Cd in soil, other soil characteristics) to the Cd concentration in tobacco. Finally, the correlation between the concentration of Cd and that of other elements differed among the types, which could be effectively discriminated based on the concentrations of 20 elements.     

Prediction of ozone concentrations in Oporto city with statistical approaches

The performance of three statistical methods: time-series, multiple linear regression and feedforward artificial neural networks models were compared to predict the daily mean ozone concentrations. The study here reported was based on data from one urban site with traffic influences and one rural background site. The studies were performed for the year 2002 and the respective four trimesters separately. In the multiple linear regression and feedforward artificial neural network models, the concentrations of ozone, the concentrations of its precursors (nitrogen oxides) and some meteorological variables for one and two days before the prediction day were used as predictors. For the application of these models in the validation step, the inputs of ozone concentration for one and two days before were replaced by the ozone concentrations predicted by the models. The results showed that time-series modelling was not profitable. In the development step, similar performances were obtained with multiple linear regression and feedforward artificial neural network. Better performance indexes were achieved with feedforward artificial neural network models in validation step. Concluding, feedforward artificial neural network models were more efficient to predict ozone concentrations.     

Accumulation and elimination of aqueous and dietary silver in Daphnia magna

The dissolved uptake, dietary assimilation, and efflux of Ag in a freshwater cladoceran, Daphnia magna, were measured under different laboratory conditions. The dissolved uptake rate of Ag was proportional to the ambient Ag concentration, but the accumulation was highly variable due to the sorption of Ag onto the daphnid bodies. The ambient Na(+) but not the ambient K(+) concentration significantly decreased the dissolved uptake of Ag, suggesting a competitive uptake of Ag(+) with Na(+). The dietary assimilation efficiencies (AEs) of Ag are dependent on the concentration of the algal food available to D. magna. The AE was as low as 2% when the food concentration reached the saturation levels. In contrast, the Ag concentrations in the algae did not significantly affect the Ag AE in D. magna. The efflux rate constant of diet-incorporated Ag was twice that through dissolved uptake. The elimination of Ag was further separated into different compartments (excretion, egestion, molting, and reproduction) in the juveniles and adults after accumulation from dissolved and dietary sources. Regeneration into the dissolved phase was the predominant pathway by which the incorporated Ag was lost from D. magna, regardless of the exposure pathway. In contrast to the essential metals or Hg, there was minimal maternal transfer of Ag from the mothers to the offspring. By employing the biokinetic model, we further showed that water is a dominant pathway for Ag accumulation in D. magna. Trophic transfer is less significant primarily because of the low Ag AE when the food concentration reached the saturation levels.     

Removal of PCB-DNAPL from a rough-walled fracture using alcohol/polymer flooding

Phase behaviour experiments employing PCB (Aroclor 1242)/alcohol/water systems were conducted with ethanol (EtOH) and n-propanol (nPA). Both exhibited an affinity for the aqueous phase within the entire two-phase region. As much as 88% by volume (88% vol.) EtOH and 80% vol. nPA were necessary to achieve full miscibility of the PCB in the aqueous phase. DNAPL-water interfacial tension (IFT) was reduced from 38.9 dyn/cm to 4.7 dyn/cm and 2.4 dyn/cm with 80% vol. EtOH and 76% vol. nPA. The addition of alcohol brought about 41% and 54% reductions in DNAPL viscosity at maximal concentrations of EtOH and nPA. Density of the PCB-DNAPL was relatively unaffected by the presence of alcohol. A series of seven experiments were conducted where successive slugs of nPA and xanthan gum polymer solutions were injected into a fractured shale sample. A 30% vol. nPA solution injected under a hydraulic gradient of 0.36 allowed enhanced PCB removal primarily through reduction of IFT and resulted in 72% DNAPL recovery. Several pore volumes of alcohol solution were necessary to displace all the potentially mobile non-wetting phase since the high-viscosity DNAPL was mobilized at a lower flow rate than the overall fluid velocity, illustrating non-piston displacement. The injection of a 95% vol. nPA alcohol solution, theoretically at a sufficient concentration to produce fully miscible displacement of the residual DNAPL at equilibrium, resulted in non-equilibrium partitioning of the PCB into the flushing solution, likely due to the high fluid velocities in the fracture. The injection of 200 pore volumes of 95% vol. nPA solution resulted in 94% DNAPL recovery. Alcohol floods operated below the miscibility envelope appear to be a valuable source zone remedial alternative where the objective is to reduce DNAPL mobility to zero, but it should be noted that DNAPL mobility is increased during the application of the technology and steps may need to be taken to prevent unwanted vertical mobilization.     

Nationwide monitoring of polychlorinated biphenyls and organochlorine pesticides in sediments from coastal environment of Korea

To assess the organochlorine contamination in the Korean marine environment, a nationwide monitoring study was conducted. A total of 138 surface sediments, covering the whole Korean coast, were collected and analyzed. Organochlorine compounds (OCs) were widely distributed in the Korean coastal environment, with PCB and DDT contamination being particularly prevalent. The overall concentrations of PCBs, DDTs, HCHs, CHLs, and HCB in surface sediments were in the range of 0.088-199ngg(-1) (median value: 1.56ngg(-1)), 0.006-135ngg(-1) (0.68ngg(-1)), not detected (ND)-5.46ngg(-1) (0.32ngg(-1)), ND-3.26ngg(-1) (0.14ngg(-1)), and ND-2.59ngg(-1) (0.05ngg(-1)), respectively. The southeastern coast was found to be highly contaminated. Overall contamination status of Korean coastal sediments with regard to OCs is lower than that of USA. With the exception of highly industrialized sites, Korean coastal areas in general showed similar OC concentrations to those of other Asian countries. There was a significant correlation between distributions of most organochlorine contaminants with each other. OC contamination is closely related to shipping and industrial activities. Of the 7 sites categorized as highly polluted, 4 are in a harbor zone. Adverse effects to benthic communities are expected at the levels of OC contamination observed from harbor and industrial areas.     

In situ and laboratory bioassays using Poecilia reticulata Peters, 1859 in the biomonitoring of an acidic lake at Camaçari, BA, Brazil

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.