Removal of arsenate from water by adsorbents: a comparative case study

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO?). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents. The results of the batch experiments showed that the As(V) adsorption decreased as follows at pH 6.5: TiO? > GFO > GFH > MAA > AA. At pH 8.5, however, As(V) removal decreased in the following order: GFO = TiO? > GFH > MAA > AA. In column experiments, at pH 6.5, the adsorbed As(V) for adsorbents followed the order: TiO? > GFO > GFH, whereas at pH 8.5 the order became: GFO = TiO? > GFH when the challenge water containing 50 μg/L of As(V) was used. Field filtration experiments were carried out in parallel at a wellhead in New Jersey. Before the effluent arsenic concentration increased to 10 μg/L, approximately 58,000 and 41,500 bed volumes of groundwater containing an average of 47 μg/L of As(V) were treated by the filter system packed with GFO and TiO?, respectively. The As(V) adsorption decreased in the following sequence: GFO > TiO? > GFH > MAA > AA. Filtration results demonstrated that GFO and TiO? adsorbents could be used as media in small community filtration systems for As(V) removal.     

水体悬移质对重金属吸附规律研究——以长江宜昌段为例

随着长江三峡工程的建设 ,上游来水的流速在此减缓 ,随江水而下的大量泥沙在此沉淀 ,将使坝下 (长江中下游 )水中的悬移质浓度降低、粒径改变 ,从而改变水环境容量。利用长江宜昌江段的周年悬移质样及水样 ,研究了悬移质对重金属 (铜、锌、铅、镉及铬 )的吸附特征。结果表明 ,悬移质对上述金属的吸附可用Freundlich型及Langmuir型等温式较好进行拟合 ;当较高浓度的金属污染物排入江水后 ,在吸附及沉淀的共同作用下 ,浓度明显降低 ;单位悬移质的吸附量随悬移质浓度降低而上升 ,但总吸附量降低 ,从而导致水中的金属污染物的平衡浓度升高。所得结果为预测水环境容量提供了依据     

Economic costs of protecting islands from invasive alien species

Biological invasions represent a key threat to insular systems and have pronounced impacts across environments and economies. The ecological impacts have received substantial focus, but the socioeconomic impacts are poorly synthesized across spatial and temporal scales. We used the InvaCost database, the most comprehensive assessment of published economic costs of invasive species, to assess economic impacts on islands worldwide. We analyzed socioeconomic costs across differing expenditure types and examined temporal trends across islands that differ in their political geography—island nation states, overseas territories, and islands of continental countries. Over US$36 billion in total costs (including damages and management) has occurred on islands from 1965 to 2020 due to invasive species’ impacts. Nation states incurred the greatest total and management costs, and islands of continental countries incurred costs of similar magnitude, both far higher than those in overseas territories. Damage-loss costs were significantly lower, but with qualitatively similar patterns across differing political geographies. The predominance of management spending differs from the pattern found for most countries examined and suggests important knowledge gaps in the extent of many damage-related socioeconomic impacts. Nation states spent the greatest proportion of their gross domestic products countering these costs, at least 1 order of magnitude higher than other locations. Most costs were borne by authorities and stakeholders, demonstrating the key role of governmental and nongovernmental bodies in addressing island invasions. Temporal trends revealed cost increases across all island types, potentially reflecting efforts to tackle invasive species at larger, more socially complex scales. Nevertheless, the already high total economic costs of island invasions substantiate the role of biosecurity in reducing and preventing invasive species arrivals to reduce strains on limited financial resources and avoid threats to sustainable development goals.     

Stabilization of the As-contaminated soil from the metal mining areas in Korea

The stabilization efficiencies of arsenic (As) in contaminated soil were evaluated using various additives such as limestone, steel mill slag, granular ferric hydroxide (GFH), and mine sludge collected from an acid mine drainage treatment system. The soil samples were collected from the Chungyang area, where abandoned Au-Ag mines are located. Toxicity characteristic leaching procedure, synthetic precipitation leaching procedure, sequential extraction analysis, aqua regia digestion, cation exchange capacity, loss on ignition, and particle size distribution were conducted to assess the physical and chemical characteristics of highly arsenic-contaminated soils. The total concentrations of arsenic in the Chungyang area soil ranged up to 145 mg/kg. After the stabilization tests, the removal percentages of dissolved As(III) and As(V) were found to differ from the additives employed. Approximately 80 and 40% of the As(V) and As(III), respectively, were removed with the use of steel mill slag. The addition of limestone had a lesser effect on the removal of arsenic from solution. However, more than 99% of arsenic was removed from solution within 24 h when using GFH and mine sludge, with similar results observed when the contaminated soils were stabilized using GFH and mine sludge. These results suggested that GFH and mine sludge may play a significant role on the arsenic stabilization. Moreover, this result showed that mine sludge can be used as a suitable additive for the stabilization of arsenic.     

Stabilization of the As-contaminated soil from the metal mining areas in Korea

The stabilization efficiencies of arsenic (As) in contaminated soil were evaluated using various additives such as limestone, steel mill slag, granular ferric hydroxide (GFH), and mine sludge collected from an acid mine drainage treatment system. The soil samples were collected from the Chungyang area, where abandoned Au–Ag mines are located. Toxicity characteristic leaching procedure, synthetic precipitation leaching procedure, sequential extraction analysis, aqua regia digestion, cation exchange capacity, loss on ignition, and particle size distribution were conducted to assess the physical and chemical characteristics of highly arsenic-contaminated soils. The total concentrations of arsenic in the Chungyang area soil ranged up to 145 mg/kg. After the stabilization tests, the removal percentages of dissolved As(III) and As(V) were found to differ from the additives employed. Approximately 80 and 40% of the As(V) and As(III), respectively, were removed with the use of steel mill slag. The addition of limestone had a lesser effect on the removal of arsenic from solution. However, more than 99% of arsenic was removed from solution within 24 h when using GFH and mine sludge, with similar results observed when the contaminated soils were stabilized using GFH and mine sludge. These results suggested that GFH and mine sludge may play a significant role on the arsenic stabilization. Moreover, this result showed that mine sludge can be used as a suitable additive for the stabilization of arsenic.     

Organizations in context: proposal for a new theoretical approach in prescriptive accident research

Lately, requests have been made to include the contexts of enterprises in models to prevent accidents at work. This paper presents different contextual theories in order to analyze whether this type of theory could be a way to elaborate our understanding of context. A differentiation is made between (a) theories of understanding relations between enterprises and regulatory agencies and (b) theories to perceive the relation between enterprise and the broader context. The last group of theories has its point of departure in an organizational understanding diverging from the classical, rational understanding of organizations and organizational processes. The conclusion is that contextual theories open for an elaborated understanding of the role of contextual relations in accident prevention, but also that an investigation of the potentials for making the theories action-orientated is needed.     

减压法在新型双程序柱上的应用——废水中苯系物的测定

本文采用减压法解决了新型双程序柱载气流速过低问题,使测定结果灵敏度提高,保留时间缩短。用于粗苯车间废水中苯系物的测定,回收率为９０３～１０１６,最低检出浓度为００００７～０００１４ｇ／Ｌ。     

A facile hydrothermal method–fabricated robust and ultralight weight cellulose nanocrystal-based hydro/aerogels for metal ion removal

Environmental Science and Pollution Research - Heavy metal ion contamination, in particular that associated with Pb2+, Cd2+, and Cu2+, poses a considerable threat to aquatic environments and human...     

Examining the Factors Affecting Air Pollution Emission Growth in China

In this study, a structural decomposition method was applied to research the factors affecting the changes in air pollution emissions in China. Based on 1995–2009 data from the World IO Database, we combine China’s (Import) Noncompetitive IO Table and the Environmental Account Table. The results indicate that emission intensities represent the most important factor for reducing air pollution emissions in China. In contrast, economies of scale and the intermediate input product structure constitute the major causes for acceleration in the growth of air pollution emissions in China. From the perspective of final demand, the economic scale effect caused by investment demand is the main reason for this accelerated growth in China’s air pollution emissions in recent years. Consumption-driven economic growth is cleaner, while investment-driven economic growth is dirtier. This study constructed a structure decomposition model based on the input-output tables, which is suitable for studying the driving forces of various economic indicators, such as energy, carbon dioxide, and economic growth. At the same time, this method is helpful for analyzing the factors that influence changes in economic indicators that result from different economic pull modes, such as the final demand mode. However, the model does have limitations; for example, it does not consider the difference between general trade and processing trade in exports.     

Arsenic contamination in groundwater and its possible sources in Hanam, Vietnam

This study investigated the arsenic (As) level in groundwater, and the characteristics of aquifer sediment as related to the occurrence of As in groundwater in Hanam, Vietnam. The deposition and transport of As-containing substances through rivers were also examined. Arsenic concentrations in 88% of the groundwater samples exceeded the As limit for drinking water based on the WHO standards. The dominating form of arsenic was As(III). The maximum total As content in bore core sediment was found in a peat horizon of the profiles and generally, elevated levels of As were also found in other organic matter-rich horizons. Total As contents of the bore core sediments were significantly correlated with crystalline iron oxide, silt and clay contents, suggesting that As in aquifer sediment was mainly associated with iron (hydr)oxides and clay mineral. In the groundwater, As concentration showed significant correlations with the total concentrations of Fe and HCO (3)(-). Significant correlations between HCl-extractable As and non-crystalline Fe oxide, total C, N, and S were also observed in the profiles. The results support the hypothesis that under favorable reductive conditions established by the degradation of organic matter, the dissolution of iron (hydr)oxides releases adsorbed As into the groundwater. The deposition of As in the sediments from the Red River were significantly higher than that in the Chau Giang River, suggesting that the Red River is the main source of As-containing substances deposited in the study area.