Impacts of microwave pretreatments on the semi-continuous anaerobic digestion of dairy waste activated sludge

Microwave (MW) irradiation is one of the new and possible methods used for pretreating the sludge. Following its use in different fields, this MW irradiation method has proved to be more appropriate in the field of environmental research. In this paper, we focused on the effects of MW irradiation at different intensities on solubilization, biodegradation and anaerobic digestion of sludge from the dairy sludge. The changes in the soluble fractions of the organic matter, the biogas yield, the methane content in the biogas were used as control parameters for evaluating the efficiency of the MW pretreatment. Additionally, the energetic efficiency was also examined. In terms of an energetic aspect, the most economical pretreatment of sludge was at 70% intensity for 12 min irradiation time. At this, COD solubilization, SS reduction and biogas production were found to be 18.6%, 14% and 35% higher than the control, respectively. Not only the increase in biogas production was investigated, excluding protein and carbohydrate hydrolysis was also performed successfully by this microwave pretreatment even at low irradiation energy input. Also, experiments were carried out in semi continuous anaerobic digesters, with 3.5 L working volume. Combining microwave pretreatment with anaerobic digestion led to 67%, 64% and 57% of SS reduction, VS reduction and biogas production higher than the control, respectively.     

Cationic amphiphilic dendrimers with tunable hydrophobicity show in vitro activity

Environmental Chemistry Letters - The widespread use of antibiotics has led to an increase in the number of strains resistant to major antibacterial pharmaceuticals. Many...     

Solid state biomethanation of fruit wastes.

Overtones of fruit wastes accumulate daily in the city of Chennai, India and there is an urgent need to develop, assess and use ecofriendly methods to dispose them. Presently an attempt has been made to study solid state biomethanation of fruit wastes using a laboratory scale anaerobic digester Fruit wastes containing 3%, 4% and 5% solids were used for experimentation. Daily and cumulative production of biogas produced during the study was recorded. Increase in nitrogen, phosphorus and potassium content in the feed was observed during the digestion. During the study the biogas generation increased with increase in total solids. While the gas generation was 0.006 m3/day/m3 of the reactor volume when the solid content was 3% the corresponding values for 4% and 5% solids were 0.27and 0.35 m3 respectively Varying TS 3% to 4% has no effect on fermentation stability and pH remained between 6.8 and 7.4, but an inhibition of methanogenic bacteria was observed for TS 5%. The overall performance of the reactor was depressed by changing feed concentration from 3% to 5%. Experiments with 4% initial solid contend was ideal for solid-state biomethanation.     

Determination of Microorganisms’ Attack on Some Flexible Polymers by Using Soil Burial Test Method

Many controversial issues have recently been associated with plasticized poly(vinyl chloride) (pPVC) used in building applications, mainly for flooring. One of them has to do with the health impact of some plasticizers and thermal stabilizers based on heavy metal compounds. Recent advances in the synthesis of polyolefins based on metallocene catalysts can yield similar flexibility for formulations as is now available for those based on pPVC. Polyolefin copolymers are considered to be possible replacements for pPVC. The soil burial test has demonstrated that highly filled polyolefin elastomer formulations having a significant percentage of post-consumer polyolefins (up to 60% in laboratory conditions) have interesting properties from the biodegradation point of view. They are more resistant to microorganisms’ attack than plasticized flooring formulations based on PVC that are currently used, even in a very harsh environment as soil, where complex mixtures of microorganisms are present. The effect of microorganisms’ attack after soil burial was evaluated by visual examination, weight loss, water absorption and changes in mechanical properties.     

Growth of Brassica juncea under chromium stress: influence of siderophores and indole 3 acetic acid producing rhizosphere bacteria

Plant growth promoting rhizobacterial (PGPR) strains A3 and S32 have been shown to promote the growth of Brassica juncea under chromium stress which has been related to the microbial production of siderophores and indole 3 acetic acid (IAA). The aim of the present study is to evaluate the importance of siderophores and IAA producing PGPR on the growth of Brassica juncea under chromium stress. The production of IAA and siderophores were observed in the strains A3 and S32, respectively. Both PGPR strains promote the growth of Brassica juncea under chromium stress. The maximum growth was observed in plants inoculated with siderophores producing strain 32. Both the bacterial inoculum did not influence the uptake of chromium by plants. The present observation showed that PGPR isolates A3 and S32 are capable of protecting the plants against the inhibitory effects of chromium by producing the siderophores and IAA.     

Competitive effects of humic acid and wastewater on adsorption of Methylene Blue dye by activated carbon and non-imprinted polymers

Natural organic matter(NOM), present in natural waters and wastewater, decreases adsorption of micropollutants, increasing treatment costs. This research investigated mechanisms of competition for non-imprinted polymers(NIPs) and activated carbon with humic acid and wastewater. Three different types of activated carbons(Norit PAC 200,Darco KB-M, and Darco S-51) were used for comparison with the NIP. The lower surface area and micropore to mesopore ratio of the NIP led to decreased adsorption capacity in comparison to the activated carbons. In addition, experiments were conducted for single-solute adsorption of Methylene Blue(MB) dye, simultaneous adsorption with humic acid and wastewater, and pre-loading with humic acid and wastewater followed by adsorption of MB dye using NIP and Norit PAC 200. Both the NIP and PAC 200 showed significant decreases of 27% for NIP(p = 0.087) and 29% for PAC 200(p = 0.096) during simultaneous exposure to humic acid and MB dye. There was no corresponding decrease for NIP or PAC 200 pre-loaded with humic acid and then exposed to MB. In fact, for PAC 200, the adsorption capacity of the activated carbon increased when it was pre-loaded with humic acid by 39%(p = 0.0005). For wastewater, the NIP showed no significant increase or decrease in adsorption capacity during either simultaneous exposure or pre-loading. The adsorption capacity of PAC 200 increased by 40%(p = 0.001) for simultaneous exposure to wastewater and MB. Pre-loading with wastewater had no effect on MB adsorption by PAC 200.     

A study of a sustainable greenway approach for a part of the Silk Road in Turkey

The article describes different steps and methodologies to create an alternative greenway with recreational, scenic, historical and cultural values in Hamsiköy-Zigana, part of Trabzon-Gümü?hane former state highway. As a first step, inventory studies and analyses were carried out to determine the cultural and natural values of the area. As the second step, area analyses studies were carried out. Depending on results of expert-based visual assessment and suitability analyses for determining the suitability of greenway planning in the study area; recreational, scenic, historical–cultural and multifunctional status of the greenway having all these three functions at the same time were mapped using suitability rank in GIS and the plan square technique. As a result, the plan squares having high suitability for the above functions were dense in the determined study, in terms of old highway and neighbourhood. In the whole area (4385.25 ha), 598.00 ha were ranked as good (A), 770.27 ha as medium (B) and 3016.98 ha as poor (C), in terms of suitability value. Seasonal assessments for recreation and scenery functions of A, B and C indicate that the area has opportunities for all seasons. As a third step, the results are discussed and some proposals suggested.     

Future Distribution of Arctic Char <Emphasis Type="Italic">Salvelinus alpinus</Emphasis> in Sweden under Climate Change: Effects of Temperature,Lake Size and Species Interactions

Novel communities will be formed as species with a variety of dispersal abilities and environmental tolerances respond individually to climate change. Thus, models projecting future species distributions must account for species interactions and differential dispersal abilities. We developed a species distribution model for Arctic char Salvelinus alpinus, a freshwater fish that is sensitive both to warm temperatures and to species interactions. A logistic regression model using lake area, mean annual air temperature (1961–1990), pike Esox lucius and brown trout Salmo trutta occurrence correctly classified 95 % of 467 Swedish lakes. We predicted that Arctic char will lose 73 % of its range in Sweden by 2100. Predicted extinctions could be attributed both to simulated temperature increases and to projected pike invasions. The Swedish mountains will continue to provide refugia for Arctic char in the future and should be the focus of conservation efforts for this highly valued fish.     

Determining recreational, scenic, and historical–cultural potentials of landscape features along a segment of the ancient Silk Road using factor analyzing

Generally, roads are structures connecting areas of special importance to each other (e.g., from urban areas to villages). In addition to functioning as transportation mediums, roads have aesthetic qualities by means of their recreational, scenic, and cultural functions. One of these unexplored roads, the Trabzon–Gümü?hane old state highway in the Northeast Turkey, the subject of this study, is quite unique for being a part of the historical Silk Road. The aim of the study is to determine the recreational, scenic, and cultural potentials of this road and to identify the landscape qualities based on these potentials. After dividing the road into three sections for comparison purposes, data gathered from basic digital maps obtained from The General Directorate of Rural Services (the governmental agency that is responsible for producing such digital maps) and field trips were entered into maps using geographic information system followed by creating demonstration films using photographs and video camera images of the natural and cultural characteristics of the area. Then, these films were evaluated by an expert team to identify the road’s recreational, scenic, and cultural potentials. The results of the evaluation process, the relationships between determined landscape characteristics for each function, and the contribution scores of different functions assigned for the artificial features were statistically analyzed. The analyses showed a very strong relationship between the sections and the contribution scores of the recreation and the scenic functions. The results of these analyses also revealed some landscape characteristics having high contribution values for all the functions. This, in turn, helped in determining a potential of the study area to become a greenway.     

Determination of heavy metals in bee honey with connected and not connected metal wires using inductively coupled plasma atomic emission spectrometry (ICP–AES)

Two honey samples are taken from two parts of the same honeycomb: one that contacts to the surface of the wire and the other taken from the surface that does not contact the wires. Heavy metal contents of these two samples were determined by inductively coupled plasma atomic emission spectrometry). The Mo, Cd, Cr, Fe, Mn, Ni and Zn contents of the honey in contact with wire is higher when compared to the other. Especially, Fe and Zn contents of honey in contact with wire is much higher than the non-contact one. These values are, respectively, 190.21 and 112.76 ppm. Besides, Ni content of honey in contact with wire is approximately 50% higher.