Ambient concentrations and source apportionment of PCBs and trace elements around an industrial area in Izmir, Turkey

Atmospheric concentrations of polychlorinated biphenyls (PCBs) and trace elements were measured at two sites (Industrial and Urban) located around the Aliaga industrial region, Izmir, Turkey. Average sigma 36PCB concentrations were 3136+/-824 and 1371+/-642 pg m(-3) for summer and winter periods, respectively in the Industrial site and they were 314+/-129 and 847+/-610 pg m(-3) in the Urban site. The elemental content showed that the PM(10) measured at the Industrial site was dominated by terrestrial elements and trace elements emitted by the iron-steel plants (Fe, Zn and Pb). The elemental profile at the Urban site was typical for Aegean Region that was dominated by terrestrial elements (Ca, Al, Mg) and sea salt (Na). Sources of particle-phase PCBs and trace elements were identified using factor analysis (FA) and were apportioned by chemical mass balance (CMB) model. FA suggested that the steel industry, fuel oil combustion, or the nearby vinyl chloride process in the petrochemical plant, and soil were significant PCB sources. CMB results showed that at the Industrial site, the contribution of steel industry and soil to particle-phase PCBs were 71% and 22%, respectively, while at the Urban site, the contributions were 33% and 49%, respectively. Steel industry was also the dominant contributor for trace elements around the site. Fugacity calculations in air and soil showed that the soil acts as a secondary source to the atmosphere for low molecular weight PCBs especially in summer and as a sink for the higher molecular weight ones.     

Ethical Approach to Fluoridation in Drinking Water Systems of UK and Turkey

The practice of adding substances to make water safe to drink and its consequential effects on human health have been a contentious matter for a long time. In this study, the addition of fluoride in drinking water was evaluated after examining two different countries: Britain and Turkey. This study has used an independent and ethical approach taking into account the cautious but assertive dentists’ comments on the addition of fluoride for years. This research focuses on a comparative analysis of Britain, an advanced economy, and Turkey, a developing country, supported with tangential reference to worldwide practice in general. Drawing on ongoing studies, the research analyses empirical evidence and arguments to conduct an assessment of Turkey’s practices. The ethical argument about fluoridation focuses on the question of adequate evidence for its health benefits and the autonomy of the consumer. As the consumer is not fully consulted about this practice, it could be argued that the will of the consumer can be put to the test in the democratic process. Hence, the key to any policy has to be about both clarity of the national government intention and continued engagement with consumer groups at regional level.     

Effects of honey HMF on enzyme activities and serum biochemical parameters of Wistar rats

Hydroxymethylfurfural (HMF) is a by-product of thermal degradation of glucose and fructose. In this study, the effects of high HMF content of honey on biochemical parameters of rats were investigated. Experiments were conducted with 40 Wistar albino male rats, each weighing 250–350 g and covered a period of 5 weeks. The animals were divided into five groups. The first group was served as control group. HMF was injected subcutaneously at a dose of 200 mg/kg rat b.w. to the animals in group 2. Group 3 was fed with honey that contains 10 mg HMF/kg honey. In group 4 and 5, there were honeys that contain significantly high HMF content due to long storage period (181 mg HMF/kg honey) and heat process (140 mg HMF/kg honey). At the end of the feeding process, biochemical blood parameters of rats were investigated. It was observed that there were no differences among the glucose, triglyceride, HDL cholesterol, uric acid, Na, GGT, and ALP parameters of the groups. On the other hand, significant differences were observed among the cholesterol, LDL, BUN, creatinine, Ca, P, Mg, K, Cl, total bilirubin, LDH, CPK, AST, ALT, total protein, and pseudocholinesterase values of the rats. The highest adverse effects were obtained from group HMF, and it was followed by groups SH (stored honey) and HH (heated honey). It can be concluded that high HMF content of honey may affect the human health adversely; thus, HMF in honey must be controlled by beekeepers.     

Evaluating climate change effects on water and salt resources in Salt Lake, Turkey using multitemporal SPOT imagery

The main goal of this study is to investigate the dimension of climate change effects in Salt Lake and its vicinity in Turkey using satellite remote sensing data. The first stage of the study includes evaluation of the multitemporal climatic data on the Salt Lake Basin Area, Turkey for a period of 35 years (1970–2005). The changes in mean temperature and precipitation are evaluated for the study area by comparing two periods, 1970–1992 and 1993–2005. In the second stage, the effects of climate changes in the Salt Lake are investigated by evaluating water and salt reserve changes through seasonal and multitemporal SPOT imagery collected in 1987 and 2005. The climatic data and remotely sensed and treated satellite images show that water and salt reserve in Salt Lake has decreased between 1987 and 2005 due to drought and uncontrolled water usage. It is suggested that the use of water supplies, especially underground waters, around the Salt Lake should be controlled and the lake should regularly be monitored by current remote sensing data for an effective management of water and salt resources in the region.     

Biomanagement of paper mill sludge using an indegenous (Lampito mauritii) and two exotic (Eudrilus eugineae and Eisenia foetida) earthworms

Paper mills have severe problem in disposing effluent or semisolid sludge despite repeated recycling. It requires treatment prior to disposal of sludge. In recent years biological treatment methods received much attention and considered as efficient low-cost treatment. One such method is vermiculture treatment. The present study was carried out to dispose the paper mill sludge biologically using 2 exotic species (Eudrilus eugineae and Eiseniafoetida) and an indigenous species (Lampito mauritii) of earthworm. The paper mill sludge in various concentration 25%,50% and 75% were subjected to vermitub treatment for a period of 60 days. During the period of study data were collected on reproductive strategies of earthworm and chemical analysis of wastes before and after treatment. Results obtained indicate that 25% concentration of sludge was ideal and of the three worms used Eiseniafoetida proved to be the best worm for biomanagement.     

Protective effects of vitamin C and curcumin against acrylamide toxicity in embryonic fibroblast cells

Abstract

Acrylamide is a highly soluble and widely produced industrial chemical that has been shown to pose numerous health hazards. This study aimed to assess the effects of acrylamide on the cytotoxicity and oxidative damage in embryonic fibroblast cells (BALB/c 3T3) and to measure protective roles of the natural antioxidants vitamin C and curcumin. Embryonic fibroblast cells were exposed to acrylamide at concentrations of 1, 10, 100, and 1000?μmol/L and vitamin C (50?μmol/L) or curcumin (2.5?μmol/L) for 24?h. Cell viability, cytotoxicity, the activities of antioxidant enzymes superoxide dismutase, glutathione-S-transferase, glutathione peroxidase and catalase, and the markers of oxidative lipid peroxidation, hydroxyl radical, hydrogen peroxide and glutathione were measured. Co-treatment of the acrylamide-exposed fibroblast cells with vitamin C or curcumin attenuated the cytotoxicity and formation of reactive oxygen species and decreased the antioxidant enzyme activity. Thus, it was concluded that vitamin C and curcumin may play a protective role against acrylamide toxicity; the treatment with 50?μmol/L vitamin C was found to be more effective than the treatment with 2.5?μmol/L curcumin.     

Atmospheric concentrations and phase partitioning of polybrominated diphenyl ethers (PBDEs) in Izmir, Turkey

Atmospheric concentrations of 7 PBDE congeners (BDE-28, -47, -99, -100, -153, -154 and -209) were determined at four sites (i.e. Suburban, Urban 1, Urban 2, Industrial) in Izmir, Turkey and their gas/particle partitioning was investigated. Total PBDE ( summation operator(7)PBDE) concentrations ranged between 11 (Urban 1) and 149pgm(-3) (Industrial) in summer, while in winter, they ranged from 6 (Suburban) to 81pgm(-3) (Industrial). BDE-209 was the dominant congener at all sites, followed by BDE-99 and -47. Investigation of source profiles indicated that the air samples were dominated by congeners of the penta and deca-technical BDE mixtures. The measured PBDE particle fractions were compared to the predictions of the K(OA) (octanol-air partition coefficient)-based equilibrium partitioning model and to the dynamic uptake model developed by others for passive samplers, which was adapted to model gas-particle partitioning in this study. For BDE-28, good agreement was observed between the experimental particle fractions and those predicted by the equilibrium partitioning model. However, this model overestimated the particle fractions of other congeners. The predictions of the dynamic uptake model supported the hypothesis that the unexpectedly high partitioning of BDEs (except BDE-28) to the gas-phase is due to their departure from equilibrium partitioning. When congeners with very large octanol-air partition coefficients (i.e. BDE-100, -99, -154, -153, and -209) are emitted from their sources in the gas-phase, they may remain in that phase for several months before reaching equilibrium with atmospheric particles. This may also have important implications for the transport of atmospheric PBDEs. For example, in addition to particle-bound transport, the gas-phase transport of highly brominated congeners (i.e. BDE-209) may also be important.     

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation

In this study, PM₁₀ concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM₁₀ concentration measured in the winter season was 86.4 and 27.3 μg/m³, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 μg/m³ in the summer season. According to the results, it was observed that the PM₁₀ levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.     

Applications of waste-derived visibly active Fe-TiO2 composite incorporating the hybrid process of photocatalysis and photo-Fenton for the inactivation of E. coli

Environmental Science and Pollution Research - The study reports the applications of waste-derived visibly active Fe-TiO2 composite for the inactivation of E. coli present in water. The Fe/TiO2...