Concentrations and Source Characteristics of Airborne Carbonyl Compounds Measured Outside Urban Residences

Abstract

This paper presents the analysis of ambient air concentrations of 10 carbonyl compounds (aldehydes and ketones) measured in the yards of 87 residences in the city of Elizabeth, NJ, throughout 1999–2001. Most of these residences were measured twice in different seasons; the sampling duration was 48 hr each time. The authors observed higher concentrations for most of the measured carbonyl compounds on warmer days, reflecting larger contributions of photochemical reactions on warmer days. The estimated contributions of photochemical production varied substantially across the measured carbonyl compounds and could be as high as 60%. Photochemical activity, however, resulted in a net loss for formaldehyde. The authors used stepwise multiple linear regression models to evaluate the impact of traffic sources and meteorological conditions on carbonyl concentrations using the data collected on colder days (with lower photochemical activities). They found that the concentrations of formal-dehyde, acetaldehyde, acrolein, propionaldehyde, crotonaldehyde, benzaldehyde, glyoxal, and methylglyoxal significantly decreased with increasing distance between a measured residence and one or more major roadways. They also found significant negative associations between concentrations for most of the measured carbonyl compounds and each of the following meteorological parameters: mixing height, wind speed, and precipitation.     

Spatially valid data of atmospheric deposition of heavy metals and nitrogen derived by moss surveys for pollution risk assessments of ecosystems

For analysing element input into ecosystems and associated risks due to atmospheric deposition, element concentrations in moss provide complementary and time-integrated data at high spatial resolution every 5 years since 1990. The paper reviews (1) minimum sample sizes needed for reliable, statistical estimation of mean values at four different spatial scales (European and national level as well as landscape-specific level covering Europe and single countries); (2) trends of heavy metal (HM) and nitrogen (N) concentrations in moss in Europe (1990–2010); (3) correlations between concentrations of HM in moss and soil specimens collected across Norway (1990–2010); and (4) canopy drip-induced site-specific variation of N concentration in moss sampled in seven European countries (1990–2013). While the minimum sample sizes on the European and national level were achieved without exception, for some ecological land classes and elements, the coverage with sampling sites should be improved. The decline in emission and subsequent atmospheric deposition of HM across Europe has resulted in decreasing HM concentrations in moss between 1990 and 2010. In contrast, hardly any changes were observed for N in moss between 2005, when N was included into the survey for the first time, and 2010. In Norway, both, the moss and the soil survey data sets, were correlated, indicating a decrease of HM concentrations in moss and soil. At the site level, the average N deposition inside of forests was almost three times higher than the average N deposition outside of forests.     

Cropland patchiness strongest agricultural predictor of bird diversity for multiple guilds in landscapes of Ontario,Canada

The potential for agricultural landscapes to support biodiversity may vary greatly based on agricultural land use. Current knowledge suggests that agricultural composition and intensity are dominant drivers of biodiversity in agricultural landscapes, with variable effects of agricultural configuration and landscape diversity. The aim of this study was to determine the relative effects of agricultural composition, intensity, configuration, and landscape diversity on the species diversity of six distinct bird guilds on the landscape scale in a large and complex landscape in Ontario, Canada. We found that agricultural configuration, specifically patchiness of croplands, and to a lesser degree forage lands, was the strongest predictor of bird diversity for three of the six bird guilds considered (forest, shrubland, and town). The effects of increased cropland patchiness were variable, with forest and shrubland bird diversity increasing from small to moderate patchiness, and town bird diversity declining from moderate to high patchiness. Grassland birds, a group of considerable conservation concern, increased near linearly with increased agricultural land cover in the landscape, highlighting the need to consider agricultural lands in conservation planning for this species group. Woodland bird diversity declined significantly with all increasing measures of agricultural intensity, including the proportion of high-intensity agriculture and larger patches of agricultural land. Wetland birds were unique from the other guilds, showing primarily a strong association between diversity of land cover types and guild-level bird diversity. Surprisingly, increased cover of agricultural lands, which we predicted to be a dominant driver of guild-level bird diversity declines due to habitat loss, had weak, non-significant effects relative to the other land use variable being tested, except for the positive association with grassland birds. Our findings suggest that a mix of management strategies should be employed to consider the varying effects of agricultural lands on different bird guilds, such as the inclusion of agricultural land in conservation strategies for grassland species and further managing the configuration of agricultural lands to enhance biodiversity of agricultural landscapes.     

EMAP Design and River Reach File 3 (RF3) as a Sample Frame in the Central Valley, California

The Central Valley, California, R-EMAP project assessed the effects of highly modified, agriculturally dominated landuse on the aquatic resources of the lower portion of the Central Valley watersheds. The focus of this paper is to assess the utility of the EMAP design and the River Reach File version 3 (RF3) 1:100,000 scale Digital Line Graph (DLG) as a sampling frame. The study area is 34,099 mi²(88,316 km²) and comprises the lower reaches of the Sacramento River and San Joaquin River watersheds to the 1000 ft. (305 m) elevation. Sampling sites are selected using a tessellation stratified design to represent the two main populations of interest: natural streams and man-made waterways. Sites are selected to represent 13,226 miles of streams and sloughs, and 14,648 miles of irrigation canals, ditches and drains. To achieve an approximately equal sample size across stream orders and basins, the sample design was weighted by Strahler order categories to ensure sampling occurred in the higher order streams. Based on office and field reconnaissance, the study provided information on the quality of RF3 as a sampling frame. Site selection using RF3 had a success rate of approximately 44%. The RF3 database has an error rate of approximately 7%. When human influence factors were included, the error rate increased to 16%. There was an 11% error rate when selecting sites for natural streams, and approximately a 14% error rate for man-made waterways. The reconnaissance information indicated that presence or absence of irrigation ditches and return drains depends on changing agricultural uses. Some of the error in the RF3 for natural streams and man-made waterways can be attributed to rapid urban expansion, especially in the San Joaquin basin.     

Change vector analysis to categorise land cover change processes using the tasselled cap as biophysical indicator

The continuous extraction of wood and the conversion of forest to small- and large-scale agricultural parcels is rapidly changing the land cover of the mount Cameroon region. The changes occur at varying spatial scales most often not more than 2ha for the small-scale subsistence farms and above 10ha for the extensive agricultural plantations of cocoa and palm. Given the importance of land use and land cover data in conservation planning, accurate and efficient techniques to provide up-to-date change information are required. A number of techniques for realising the detection of land cover dynamics using remotely sensed imagery have been formulated, tested and assessed with the results varying with respect to the change scenario under investigation, the information required and the imagery applied. In this study the Change Vector Analysis (CVA) technique was implemented on multitemporal multispectral Landsat data from the Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM) sensors to monitor the dynamics of forest change in the mount Cameroon region. CVA was applied to multi-temporal data to compare the differences in the time-trajectory of the tasseled cap greenness and brightness for two successive time periods - 1987 and 2002. The tasseled cap was selected as biophysical indicator because it optimises the data viewing capabilities of vegetation, representing the basic types of land cover - vegetation, soil and water. Classes were created arbitrarily to predict the technique's potential in monitoring forest cover changes in the mount Cameroon region. The efficiency of the technique could not be fully assessed due to the inavailability of sufficient ground truth data. Assessment was based on the establishment of an error matrix of change versus no-change. The overall accuracy was 70%. The technique nevertheless demonstrated immense potentials in monitoring forest cover change dynamics especially when complemented with field studies.     

Use of headspace SPME-GC-MS for the analysis of the volatiles produced by indoor molds grown on different substrates

An automated headspace solid phase microextraction method followed by GC-MS analysis was used to evaluate and compare the in vitro production of microbial volatile organic compounds (MVOCs) on malt extract agar, plasterboard and wallpaper. Five fungal strains were isolated from the walls of water-damaged houses and identified. In addition, four other common molds were studied. In general, MVOC production was the highest on malt extract agar. On this synthetic medium, molds typically produced 2-methylpropanol, 2-methylbutanol and 3-methylbutanol. On wallpaper, mainly 2-ethylhexanol, methyl 2-ethylhexanoate and compounds of the C8-complex such as 1-octene-3-ol, 3-octanone, 3-octanol and 1,3-octadiene were detected. The detection of 2-ethylhexanol and methyl 2-ethylhexanoate indicates an enhanced degradation of the substrate by most fungi. For growth on plasterboard, no typical metabolites were detected. Despite these metabolite differences on malt extract agar, wallpaper and plasterboard, some molds also produced specific compounds independently of the used substrate, such as trichodiene from Fusarium sporotrichioides and aristolochene from Penicillium roqueforti. Therefore, these metabolites can be used as markers for the identification and maybe also mycotoxin production of these molds. All five investigated Penicillium spp. in this study were able to produce two specific diterpenes, which were not produced by the other species studied. These two compounds, which remain unidentified until now, therefore seem specific for Penicillium spp. and are potentially interesting for the monitoring of this fungal genus. Further experiments will be performed with other Penicillium spp. to study the possibility that these two compounds are specific for this group of molds.     

Guided group discussion and attitude change: The roles of normative and informational influence

Kurt Lewin and others have showed that group discussion effectively changed attitudes and behaviors compared to individually targeted messages. This study examines the roles of normative and informational social influence in this effect. High school students heard a message about replacing toxic products with nontoxic alternatives; classes were randomly assigned to hear the message delivered as a lecture or via guided group discussion. For female students (N=250 in 26 classes), HLM mediation analyses suggested normative influence predominated: Discussion was more effective than lecture and this effect was fully mediated by students’ perceptions that other students endorsed nontoxics. Content analyses of students’ comments indicated that three kinds of remarks led female students to this perception: (1) sharing knowledge about nontoxics; (2) asking questions about nontoxics; and (3) little praise for toxic products. For male students in separate HLM analyses (N=107 in 19 of the same classes), informational influence was most apparent: Postmeeting attitudes were higher after discussion than lecture, and this effect was partially mediated by cognitive elaboration about the message (but not perceptions others endorsed the message). In addition, males’ quiz grades were higher after discussion, and students’ comments fully mediated the discussion to quiz grades relationship. Results support the importance of hearing others’ promessage comments for changing socially motivated behaviors, although the routes of influence appear to differ for these samples of male and female students.     

Analysis of Wind Farm Output: Estimation of Volatility Using High-Frequency Data

In the financial year 2011–2012, wind farms supplied 26 % of South Australia’s electricity demand according to the Australian Energy Market Operator’s report. This contribution has risen from zero in 2003. The operation of the electricity grid depends heavily on knowledge of the variability of supply. Wind farm output displays similar conditional volatility as financial market variables. In this paper, a new method of estimating wind farm output volatility on a 5-min time scale is developed through the use of higher-frequency wind farm output data. First, an autoregressive model for the high-frequency data is developed, and it is used to derive a volatility measure for 5-min data. The results are also true in certain general situations when the high-frequency data follow an autoregressive moving average process or exhibits long memory features. The methods described here are analogous to realised volatility measures used in financial series, except that wind farm output data are measured at uniform intervals, unlike random trading times for financial transactions.     

Emission of volatile organic compounds from religious and ritual activities in India

Worshipping activity is a customary practice related with many religions and cultures in various Asian countries, including India. Smoke from incense burning in religious and ritual places produces a large number of health-damaging and carcinogenic air pollutants include volatile organic compounds (VOCs) such as formaldehyde, benzene, 1,3 butadiene, styrene, etc. This study evaluates real-world VOCs emission conditions in contrast to other studies that examined emissions from specific types of incense or biomass material. Sampling was conducted at four different religious places in Raipur City, District Raipur, Chhattisgarh, India: (1) Hindu temples, (2) Muslim graveyards (holy shrines), (3) Buddhist temples, and (4) marriage ceremony. Concentrations of selected VOCs, respirable particulate matter (aerodynamic diameter, <5 μm), carbon dioxide, and carbon monoxide were sampled from the smoke plumes. Benzene has shown highest emission factor (EF) among selected volatile organic compounds in all places. All the selected religious and ritual venues have shown different pattern of VOC EFs compared to laboratory-based controlled chamber studies.