Soil response to a 3-year increase in temperature and nitrogen deposition measured in a mature boreal forest using ion-exchange membranes

The projected increase in atmospheric N deposition and air/soil temperature will likely affect soil nutrient dynamics in boreal ecosystems. The potential effects of these changes on soil ion fluxes were studied in a mature balsam fir stand (Abies balsamea [L.] Mill) in Quebec, Canada that was subjected to 3 years of experimentally increased soil temperature (+4 °C) and increased inorganic N concentration in artificial precipitation (three times the current N concentrations using NH₄NO₃). Soil element fluxes (NO₃, NH₄, PO₄, K, Ca, Mg, SO₄, Al, and Fe) in the organic and upper mineral horizons were monitored using buried ion-exchange membranes (PRS? probes). While N additions did not affect soil element fluxes, 3 years of soil warming increased the cumulative fluxes of K, Mg, and SO₄ in the forest floor by 43, 44, and 79 %, respectively, and Mg, SO₄, and Al in the mineral horizon by 29, 66, and 23 %, respectively. We attribute these changes to increased rates of soil organic matter decomposition. Significant interactions of the heating treatment with time were observed for most elements although no clear seasonal patterns emerged. The increase in soil K and Mg in heated plots resulted in a significant but small K increase in balsam fir foliage while no change was observed for Mg. A 6–15 % decrease in foliar Ca content with soil warming could be related to the increase in soil-available Al in heated plots, as Al can interfere with the root uptake of Ca.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites

In this study, the influence of alkali (NaOH) treatment on the mechanical, thermal and morphological properties of eco-composites of short flax fiber/poly(lactic acid) (PLA) was investigated. SEM analysis conducted on alkali treated flax fibers showed that the packed structure of the fibrils was deformed by the removal non-cellulosic materials. The fibrils were separated from each other and the surface roughness of the alkali treated flax fibers was improved. The mechanical tests indicated that the modulus of the untreated fiber/PLA composites was higher than that of PLA; on the other hand the modulus of alkali treated flax fiber/PLA was lower than PLA. Thermal properties of the PLA in the treated flax fiber composites were also affected. T_g values of treated flax fiber composites were lowered by nearly 10 °C for 10% NaOH treatment and 15 °C for 30% NaOH treatment. A bimodal melting behavior was observed for treated fiber composites different than both of neat PLA and untreated fiber composites. Furthermore, wide angle X-ray diffraction analysis showed that the crystalline structure of cellulose of flax fibers changed from cellulose-I structure to cellulose-II.     

Amygdalin in bitter and sweet seeds of apricots

Hydrogen cyanide (HCN) poisoning due to amygdalin (AMY) in apricot seeds is one of the public health issues in Turkey. The aim of this study was to investigate the AMY content of 13 different apricot seeds including bitter and sweet ones, and which are either sulfurized or roasted. The AMY content was determined by a high-performance liquid chromatography. Release of HCN was predicted and total amount of seeds which can cause poisoning was calculated. The mean AMY content of bitter seeds was 26 ± 14 mg g^?1 and that of sweet seeds was 0.16 ± 0.09 mg g^?1. The consumption of small amounts of bitter seeds may cause cyanide poisoning.     

Simulating urban waste compost effects on carbon and nitrogen dynamics using a biochemical index

Composting has emerged as a valuable route for the disposal of urban waste, with the prospect of applying composts on arable fields as organic amendments. Proper management of urban waste composts (UWCs) requires a capacity to predict their effects on carbon and nitrogen dynamics in the field, an issue in which simulation models are expected to play a prominent role. However, the parameterization of soil organic amendments within such models generally requires laboratory incubation data. Here, we evaluated the benefit of using a biochemical index based on Van Soest organic matter fractions to parameterize a deterministic model of soil C and N dynamics, NCSOIL, as compared with a standard alternative based on laboratory incubation data. The data included C mineralization and inorganic N dynamics in samples of a silt loam soil (Typic Hapludalf) mixed with various types of UWC and farmyard manure. NCSOIL successfully predicted the various nitrogen mineralization-immobilization patterns observed, but underestimated CO(2) release by 10 to 30% with the less stable amendments. The parameterization based on the biochemical index achieved a prediction error significantly larger than the standard parameterization in only 10% of the tested cases, and provided an acceptable fit to experimental data. The decomposition rates and C to N ratios of compost organic matter varied chiefly according to the type of waste processed. However, 62 to 66% of their variance could be explained by the biochemical index. We thus suggest using the latter to parameterize organic amendments in C and N models as a substitute for time-consuming laboratory incubations.     

The role of grazing by the lysianassid amphipod<Emphasis Type="Italic"> Orchomenella aahu</Emphasis> in dieback of the kelp<Emphasis Type="Italic"> Ecklonia radiata</Emphasis> in north-eastern New Zealand

The lysianassid amphipod Orchomenella aahu was associated with small-scale mass mortality of Ecklonia radiata, the dominant laminarian alga in north-eastern New Zealand. O. aahu burrowed into and hollowed out stipes with severe bleaching, accelerating mortality by 12–14 months. Meristoderm tissue of bleached plants contained approximately one-third of the phlorotannin content (~4% dry mass) present in unbleached, apparently healthier, sporophytes (~12% dry mass). Unbleached stages consistently lacked amphipod damage. O. aahu also colonised plants when non-lethal storm damage afforded entry into the cortical layers of the primary lamina, and ultimately the stipe. O. aahu typically consumed both medullary and cortical tissue of the stipes, forming networked brood-chambers within them, with increasing populations often reducing the plant to the holdfast. There was synchronised mortality across sites and between depths over spatial scales of metres. Following loss of the mature canopy, recruitment of E. radiata was generally within 2 months at most study sites where mortality had occurred.Communicated by G.F. Humphrey, Sydney     

The Impact of Uncertainty on Banking Behavior: Evidence from the US Sulfur Dioxide Emissions Allowance Trading Program

In this paper, we study empirically whether uncertainty has an influence on trade in the US sulfur dioxide allowances market. In particular, we investigate the role of uncertainty on banking behavior. To do this, we introduce a tractable, structural model of trading permits under uncertainty. The model establishes a relation between banking behavior and risk preferences, especially prudence in the Kimball (1990) sense. We then test this model using data on allowances, for utilities submitted to the US Environmental Protection Agency’s Acid Rain Program, carried over from one year to the next. Evidence is found of imprudence, namely, utilities bank permits in order to favor higher profits. Another finding is that larger utilities do not adopt behavior significantly different from that of smaller ones. This paper was presented at the “International Workshop on Uncertainty in Greenhouse Gas Inventories: Verification, Compliance & Trading” in Warsaw, Poland, September 2004, under the title “Portfolio Management of Emissions Permits and Prudence Behavior.”     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

Environmental impact of the substitution of imported soybean meal with locally-produced rapeseed meal in dairy cow feed

Growing public concerns about the traceability, safety and environmental-friendliness of food products provide an incentive for shorter supply chains in agricultural production. Here, we assessed the environmental impacts of the substitution of imported soybean meal with locally-produced rapeseed meal in French dairy production systems, using a life-cycle approach. Two feeding rations based on either French-produced rapeseed meal or Brazilian-produced soy meal as concentrates, were compared for nine impact categories, including global warming, ecotoxicity and eutrophication. Crop production was the main contributor to most impacts, while overseas transport of soy meal only had a marginal effect. The “Soybean” ration appeared more environmentally-efficient than the “Rapeseed” ration because it involved less intensive management practices, in particular regarding synthetic fertilizers consumption. However, land use changes brought about by soybean cultivation should also be examined.     

Investigation of Environmental Effects Based on Exergetic Irreversibility for Display Cases’ Units in Commercial Cooling

This study examines energetic and exergetic performances of display cases’ units used in market applications depending on different refrigerants. Besides CO₂ emission potential of each refrigerant based on exergetic irreversibility obtained from analyses is calculated by the method of Total Equivalent Warming Impact (TEWI). In this study, 1 kW cooling capacity and vapor compression cooling cycle is taken as reference and refrigerants of R-22, R-134a, R-404A, and R-507 together with alternative refrigerant R-407C and R152a are examined separately. According to analyses, R-404A gas, used widely in market applications, has low performance with average COP 3.89 and average exergy efficiency 55.20%. R-152a gas has the best performance by the thermodynamics parameters including COP 4.49, exergy efficiency 63.79%, and 0.23 kW power consumption and emission parameter 14097.490 ton CO₂/year. Although COP is used as a criterion to evaluate the systems, this study finally emphasizes the importance of exergy analysis and TEWI method which are important methods to determine irreversibility and emission potential of the systems.