Large-eddy simulation of turbulent flows over an urban building array with the ABLE-LBM and comparison with 3D MRI observed data sets

Environmental Fluid Mechanics - In this article we describe the details of an ABLE-LBM (Atmospheric Boundary Layer Environment-Lattice Boltzmann Model) validation study for urban building array...     

Climate change adaptation,flood risks and policy coherence in integrated water resources management in England

Integrated water resources management (IWRM) assumes coherence between cognate aspects of water governance at the river basin scale, for example water quality, energy production and agriculture objectives. But critics argue that IWRM is often less ‘integrated’ in practice, raising concerns over inter-sectoral coherence between implementing institutions. One increasingly significant aspect of IWRM is adaptation to climate change-related risks, including threats from flooding, which are particularly salient in England. Although multiple institutional mechanisms exist for flood risk management (FRM), their coherence remains a critical question for national adaptation. This paper therefore (1) maps the multi-level institutional frameworks determining both IWRM and FRM in England; (2) examines their interaction via various inter-institutional coordinating mechanisms; and (3) assesses the degree of coherence. The analysis suggests that cognate EU strategic objectives for flood risk assessment demonstrate relatively high vertical and horizontal coherence with river basin planning. However, there is less coherence with flood risk requirements for land-use planning and national flood protection objectives. Overall, this complex governance arrangement actually demonstrates de-coherence over time due to ongoing institutional fragmentation. Recommendations for increasing IWRM coherence in England or re-coherence based on greater spatial planning and coordination of water-use and land-use strategies are proposed.

     

Apert syndrome: what prenatal radiographic findings should prompt its consideration?

Apert syndrome was diagnosed in a newborn with typical facial and digital features whose only detected prenatal abnormality had been agenesis of the corpus callosum. This prompted a review of the central nervous system findings in all cases of Apert syndrome treated at the Craniofacial Center Boston Children's Hospital between 1978 and 2004. Two of 30 patients with Apert syndrome had prenatal identification of mild dilatation of the lateral cerebral ventricles and complete agenesis of the corpus callosum (ACC) documented with both ultrasound and MRI. Both had the common S252W mutation of FGFR2. Though cranial and orbital malformations typical of Apert were eventually seen in these fetuses in the third-trimester, even in retrospect, these were not detectable at mid second-trimester, ultrasound screening for congenital malformations. Hand malformations also went undetected in the second-trimester despite extensive imaging by experienced radiologists. We conclude that prenatal ultrasonographic identification of mild ventriculomegaly or ACC should stimulate a careful search for features of Apert syndrome and prompt follow-up imaging to look for bony abnormalities that have later onset. Prenatal molecular testing for Apert mutations should be considered in cases of mild ventriculomegaly and ACC. Copyright © 2006 John Wiley & Sons, Ltd.     

Prenatal exclusion of homocystinuria (cystathionine β-synthase deficiency) by assay of phytohaemagglutinin-stimulated fetal lymphocytes

Homocystinuria due to cystathionine β-synthase deficiency was excluded in a fetus at 23 weeks' gestation by demonstrating activity of the enzyme in fetal lymphocytes after stimulation by phytohaemagglutinin. Fetal blood sampling was carried out because two determinations of enzyme activity on cultured amniotic cells gave low, not fully diagnostic values.     

Who Visits a National Park and What do They Get Out of It?: A Joint Visitor Cluster Analysis and Travel Cost Model for Yellowstone National Park

Yellowstone National Park visitor data were obtained from a survey collected for the National Park Service by the Park Studies Unit at the University of Idaho. Travel cost models have been conducted for national parks in the United States; however, this study builds on these studies and investigates how benefits vary by types of visitors who participate in different activities while at the park. Visitor clusters were developed based on activities in which a visitor participated while at the park. The clusters were analyzed and then incorporated into a travel cost model to determine the economic value (consumer surplus) that the different visitor groups received from visiting the park. The model was estimated using a zero-truncated negative binomial regression corrected for endogenous stratification. The travel cost price variable was estimated using both 1/3 and 1/4 the wage rate to test for sensitivity to opportunity cost specification. The average benefit across all visitor cluster groups was estimated at between $235 and $276 per person per trip. However, per trip benefits varied substantially across clusters; from $90 to $103 for the “value picnickers,” to $185–$263 for the “backcountry enthusiasts,” $189–$278 for the “do it all adventurists,” $204–$303 for the “windshield tourists,” and $323–$714 for the “creature comfort” cluster group.     

Sorption and degradation of alachlor and metolachlor in ground water using green sands

Reactive barriers are used for in situ treatment of contaminated ground water. Waste green sand, a by-product of gray-iron foundries that contains iron particles and organic carbon, was evaluated in this study as a low-cost reactive material for treating ground water contaminated with the herbicides alachlor [2-chloro-2',6'-diethyl-N-(methoxymethyl)acetanilide] and metolachlor [2-chloro-6'-ethyl-N-(2-methoxy-1-methylethyl)-o-acetoluidide]. Batch and column tests were conducted with 11 green sands to determine transport parameters and reaction rate constants for the herbicides. Similar Fe-normalized rate constants (K(SA)) were obtained from the batch and column tests. The K(SA) values obtained for green sand iron were also found to be comparable with or slightly higher than K(SA) values for Peerless iron, a common reactive medium used in reactive barriers. Partition coefficients ranging between 3.6 and 50.2 L/kg were obtained for alachlor and between 1.0 and 54.8 L/kg for metolachlor, indicating that the organic carbon and clay in green sands can significantly retard the movement of the herbicides. Partition coefficients obtained from the batch and column tests were similar (+/-25%), but the batch tests typically yielded higher partition coefficients for green sands exhibiting greater sorption. Calculations made using transport parameters from the column tests indicate that a 1-m-thick reactive barrier will result in a 10-fold reduction in concentration of alachlor and metolachlor for seepage velocities less than 0.1 m/d provided the green sand contains at least 2% iron. This level of reduction generally is sufficient to reduce alachlor and metolachlor concentrations below maximum contaminant levels in the United States.     

Surface compositions of carbon sorbents exposed to simulated low-rank coal flue gases

Bench-scale testing of elemental mercury (Hg0) sorption on selected activated carbon sorbents was conducted to develop a better understanding of the interaction among the sorbent, flue gas constituents, and Hg0. The results of the fixed-bed testing under simulated lignite combustion flue gas composition for activated carbons showed some initial breakthrough followed by increased mercury (Hg) capture for up to approximately 4.8 hr. After breakthrough, the Hg in the effluent stream was primarily in an oxidized form (>90%). Aliquots of selected activated carbons were exposed to simulated flue gas containing Hg0 vapor for varying time intervals to explore surface chemistry changes as the initial breakthrough, Hg capture, and oxidation occurred. The samples were analyzed by X-ray photoelectron spectroscopy to determine changes in the abundance and forms of sulfur, chlorine, oxygen, and nitrogen moieties as a result of interactions of flue gas components on the activated carbon surface during the sorption process. The data are best explained by a competition between the bound hydrogen chloride (HCl) and increasing sulfur [S(VI)] for a basic carbon binding site. Because loss of HCl is also coincident with Hg breakthrough or loss of the divalent Hg ion (Hg2+), the competition of Hg2+ with S(VI) on the basic carbon site is also implied. Thus, the role of the acid gases in Hg capture and release can be explained.     

Trends In Regulatory Acceptance Of Risk-Based Cleanup Goals And Natural Attenuation For Site Closure

Since 1994, there has been a significant regulatory shift toward risk-based cleanup standards based on the site-specific risk of the more toxic and mobile compounds; namely, benzene, ethyl benzene, toluene, and xylene (BTEX). This regulatory shift has been accompanied by a growing acceptance of natural attenuation as an important component of petroleum site remediation. This article briefly reviews regulatory progress toward risk-based remediation and describes the successful application of risk-based corrective actions (RBCAs) at two fuel contaminated sites on Air Force installations. By developing site-specific cleanup goals, and combining natural attenuation, source reduction, and land use controls, innovative risk-based closure plans have been implemented on these sites.     

How the public perceives the visual effects of timber harvesting: an evaluation of interest group preferences

A total of 25 scenes representing the five visual quality objectives in the US Department of Agriculture Forest Service visual management system were presented to 18 professional and public interest groups in western Montana. The results indicate that nearly all the groups have similar rank orderings of the scenes in terms of visual preference. However, the groups differ according to the absolute values of their ratings. Most groups were unable, in a statistical sense, to differentiate the scenic quality of areas in the preservation and retention visual quality objectives. Landscape architects tended to rate scenes in a way similar to professional forest management groups.